From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net
Subject: [RFC PATCH] convert uhci-hcd to use debugfs
Date: Thu, 9 Dec 2004 16:55:14 -0800 [thread overview]
Message-ID: <20041210005514.GB17822@kroah.com> (raw)
In-Reply-To: <20041210005055.GA17822@kroah.com>
And here's the uhci-hcd patch.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
thanks,
greg k-h
-----------------
diff -Nru a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
--- a/drivers/usb/host/uhci-debug.c 2004-12-09 16:32:17 -08:00
+++ b/drivers/usb/host/uhci-debug.c 2004-12-09 16:32:17 -08:00
@@ -11,7 +11,7 @@
#include <linux/config.h>
#include <linux/kernel.h>
-#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
#include <linux/smp_lock.h>
#include <asm/io.h>
@@ -507,7 +496,7 @@
#define MAX_OUTPUT (64 * 1024)
-static struct proc_dir_entry *uhci_proc_root = NULL;
+static struct dentry *uhci_debugfs_root = NULL;
struct uhci_proc {
int size;
@@ -517,8 +506,7 @@
static int uhci_proc_open(struct inode *inode, struct file *file)
{
- const struct proc_dir_entry *dp = PDE(inode);
- struct uhci_hcd *uhci = dp->data;
+ struct uhci_hcd *uhci = inode->u.generic_ip;
struct uhci_proc *up;
int ret = -ENOMEM;
diff -Nru a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
--- a/drivers/usb/host/uhci-hcd.c 2004-12-09 16:32:31 -08:00
+++ b/drivers/usb/host/uhci-hcd.c 2004-12-09 16:32:31 -08:00
@@ -46,7 +46,7 @@
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
#include <linux/pm.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
@@ -1927,12 +1927,10 @@
uhci->fl = NULL;
}
-#ifdef CONFIG_PROC_FS
- if (uhci->proc_entry) {
- remove_proc_entry(uhci->hcd.self.bus_name, uhci_proc_root);
- uhci->proc_entry = NULL;
+ if (uhci->dentry) {
+ debugfs_remove(uhci->dentry);
+ uhci->dentry = NULL;
}
-#endif
}
static int uhci_reset(struct usb_hcd *hcd)
@@ -1972,25 +1970,17 @@
unsigned io_size;
dma_addr_t dma_handle;
struct usb_device *udev;
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *ent;
-#endif
+ struct dentry *dentry;
io_size = pci_resource_len(to_pci_dev(uhci_dev(uhci)), hcd->region);
-#ifdef CONFIG_PROC_FS
- ent = create_proc_entry(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_proc_root);
- if (!ent) {
- dev_err(uhci_dev(uhci), "couldn't create uhci proc entry\n");
+ dentry = debugfs_create_file(hcd->self.bus_name, S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, uhci, &uhci_proc_operations);
+ if (!dentry) {
+ dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n");
retval = -ENOMEM;
goto err_create_proc_entry;
}
-
- ent->data = uhci;
- ent->proc_fops = &uhci_proc_operations;
- ent->size = 0;
- uhci->proc_entry = ent;
-#endif
+ uhci->dentry = dentry;
uhci->fsbr = 0;
uhci->fsbrtimeout = 0;
@@ -2192,13 +2182,10 @@
uhci->fl = NULL;
err_alloc_fl:
-#ifdef CONFIG_PROC_FS
- remove_proc_entry(hcd->self.bus_name, uhci_proc_root);
- uhci->proc_entry = NULL;
+ debugfs_remove(uhci->dentry);
+ uhci->dentry = NULL;
err_create_proc_entry:
-#endif
-
return retval;
}
@@ -2405,11 +2392,9 @@
goto errbuf_failed;
}
-#ifdef CONFIG_PROC_FS
- uhci_proc_root = create_proc_entry("driver/uhci", S_IFDIR, NULL);
- if (!uhci_proc_root)
+ uhci_debugfs_root = debugfs_create_dir("uhci", NULL);
+ if (!uhci_debugfs_root)
goto proc_failed;
-#endif
uhci_up_cachep = kmem_cache_create("uhci_urb_priv",
sizeof(struct urb_priv), 0, 0, NULL, NULL);
@@ -2427,12 +2412,9 @@
warn("not all urb_priv's were freed!");
up_failed:
-
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("driver/uhci", NULL);
+ debugfs_remove(uhci_debugfs_root);
proc_failed:
-#endif
if (errbuf)
kfree(errbuf);
@@ -2448,9 +2430,7 @@
if (kmem_cache_destroy(uhci_up_cachep))
warn("not all urb_priv's were freed!");
-#ifdef CONFIG_PROC_FS
- remove_proc_entry("driver/uhci", NULL);
-#endif
+ debugfs_remove(uhci_debugfs_root);
if (errbuf)
kfree(errbuf);
diff -Nru a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
--- a/drivers/usb/host/uhci-hcd.h 2004-12-09 16:32:30 -08:00
+++ b/drivers/usb/host/uhci-hcd.h 2004-12-09 16:32:30 -08:00
@@ -326,10 +326,8 @@
struct uhci_hcd {
struct usb_hcd hcd; /* must come first! */
-#ifdef CONFIG_PROC_FS
- /* procfs */
- struct proc_dir_entry *proc_entry;
-#endif
+ /* debugfs */
+ struct dentry *dentry;
/* Grabbed from PCI */
unsigned long io_addr;
next prev parent reply other threads:[~2004-12-10 0:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-10 0:50 [RFC PATCH] debugfs - yet another in-kernel file system Greg KH
2004-12-10 0:55 ` Greg KH [this message]
2004-12-10 14:15 ` [RFC PATCH] convert uhci-hcd to use debugfs Josh Boyer
2004-12-10 15:27 ` Greg KH
2004-12-10 16:21 ` Josh Boyer
2004-12-10 17:17 ` Comments on new kernel dev. model Peter Karlsson
2004-12-10 23:44 ` Greg KH
2004-12-10 7:07 ` [RFC PATCH] debugfs - yet another in-kernel file system Jan Engelhardt
2004-12-10 7:54 ` Greg KH
2004-12-10 8:00 ` Jan Engelhardt
2004-12-10 16:02 ` Greg KH
2004-12-10 14:46 ` Josh Boyer
2004-12-10 15:30 ` Greg KH
2004-12-10 16:26 ` Josh Boyer
2004-12-10 17:21 ` Jörn Engel
2004-12-10 17:35 ` Greg KH
2004-12-10 18:29 ` Jörn Engel
2004-12-10 19:38 ` Roland Dreier
2004-12-11 1:29 ` [linux-usb-devel] " David Brownell
2004-12-11 1:39 ` Greg KH
2004-12-11 2:02 ` David Brownell
2004-12-11 2:05 ` Greg KH
2004-12-11 2:26 ` Roland Dreier
2004-12-11 2:32 ` Greg KH
2004-12-11 13:23 ` Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041210005514.GB17822@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox