From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261213AbUL1Saw (ORCPT ); Tue, 28 Dec 2004 13:30:52 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261221AbUL1Saw (ORCPT ); Tue, 28 Dec 2004 13:30:52 -0500 Received: from build.arklinux.osuosl.org ([140.211.166.26]:26754 "EHLO mail.arklinux.org") by vger.kernel.org with ESMTP id S261213AbUL1SaW (ORCPT ); Tue, 28 Dec 2004 13:30:22 -0500 From: Bernhard Rosenkraenzer Organization: LINUX4MEDIA GmbH To: kraxel@bytesex.org Subject: Re: Current saa7134 driver breaks KNC One Tv-Station DVR (card=24) Date: Tue, 28 Dec 2004 19:28:05 +0100 User-Agent: KMail/1.7.2 Cc: linux-kernel@vger.kernel.org References: <200412281821.53919.bero@arklinux.org> In-Reply-To: <200412281821.53919.bero@arklinux.org> MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200412281928.05898.bero@arklinux.org> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Tuesday 28 December 2004 18:21, Bernhard Rosenkraenzer wrote: > Trying to modprobe saa7134 with this card results in a hanging modprobe > process. Some more debug info (with 2.6.10-ac1): saa7130/34: v4l2 driver version 0.2.12 loaded ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 177 saa7134[0]: found at 0000:00:06.0, rev: 1, irq: 177, latency: 64, mmio: 0xdfff9c00 saa7134[0]: subsystem: 1894:a006, board: KNC One TV-Station DVR [card=24,autodetected] saa7134[0]: board init: gpio is 830000 saa7134[0]/oss: mixer input = TV saa7134[0]: i2c xfer: < a0 00 > saa7134[0]: i2c xfer: < a1 =94 =18 =06 =a0 =06 =80 =00 =01 =00 =00 =00 =00 =00 =00 =01 =00 =00 =ff =86 =0e =ff =20 =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =01 =40 =01 =02 =02 =03 =01 =03 =06 =ff =01 =df =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff =ff > saa7134[0]: i2c eeprom 00: 94 18 06 a0 06 80 00 01 00 00 00 00 00 00 01 00 saa7134[0]: i2c eeprom 10: 00 ff 86 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 03 06 ff 01 df ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]/core: hwinit2 saa7134[0]/video: set tv norm = PAL saa7134[0]/video: video input = 0 [Television] saa7134[0]/video: set tv norm = PAL saa7134: Loading i2c helpers<7>saa7134[0]: i2c xfer: < c0 > tuner: chip found at addr 0xc0 i2c-bus saa7134[0] tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0] saa7134[0]: i2c xfer: < c2 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < c4 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < c6 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < c8 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < ca ERROR: NO_DEVICE saa7134[0]: i2c xfer: < cc ERROR: NO_DEVICE saa7134[0]: i2c xfer: < ce ERROR: NO_DEVICE saa7134[0]: i2c xfer: < d0 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < d2 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < d4 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < d6 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < d8 ERROR: NO_DEVICE saa7134[0]: i2c xfer: < da ERROR: NO_DEVICE saa7134[0]: i2c xfer: < dc ERROR: NO_DEVICE saa7134[0]: i2c xfer: < de ERROR: NO_DEVICE saa7134[0]: i2c xfer: < 86 > tda9885/6/7: chip found @ 0x86 saa7134[0]: i2c xfer: < 86 00 c2 10 00 > saa7134[0]: i2c xfer: < 96 ERROR: NO_DEVICE saa7134[0]/irq[0,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[1,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[2,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[3,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[4,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[5,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[6,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[7,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[8,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[9,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq[10,-227141]: r=0x20 s=0x00 PE saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit saa7134[0]/irq[0,-227141]: r=0x20 s=0x00 PE [modprobe hangs] Looks like it's hanging at request_module("saa7134-empress");