* Linux 2.6.10-ac9
@ 2005-01-13 17:23 Alan Cox
2005-01-14 3:01 ` Sami Farin
2005-01-16 11:11 ` Ralf Hildebrandt
0 siblings, 2 replies; 6+ messages in thread
From: Alan Cox @ 2005-01-13 17:23 UTC (permalink / raw)
To: Linux Kernel Mailing List
Arjan van de Ven is now building RPMS of the kernel and those can be found
in the RPM subdirectory and should be yum-able. Expect the RPMS to lag the
diff a little as the RPM builds and tests do take time.
Key: o - only in -ac
* - already fixed upstream
X - discarded later as wrong
+ - ac specific (fix not relevant to non -ac)
2.6.10-ac9
* 2.6.10 variant of the stack race fix (Alan Cox)
| Found by Paul Staretz
* Stronger ELF validity checks (Solar Designer)
* Add ATI SATA identifiers (Frederick Li)
o Update ATI PATA/SATA support (Frederick Li)
* Audit fixups (Steve Grubb, Roger Luethi)
* FPU/signal handling fix (Bodo Stroesser)
* nForce2 APIC/LAPIC errata fixup (Prakash Punnoor)
* Swap aacraid fix in -ac with 2.6.11rc base fix (Tom Coughlan)
* Connnection track/rst fix (Martin Josefsson)
o Format ide printk's more nicely (Gunther Mayer)
o Stallion serial resurrection (part one) (Wayne Meissner)
* Fix nls_ascii (Ogawa Hirofumi)
* Count writeback pages in nr_scanned (Rik van Riel)
| OOM fixing
o Revert ac97_patch changes (Jules Villard)
| with this change many users get no sound out
o Correct handling of some module parameter (Rusty Russell)
errors
2.6.10-ac8
o I2O init/exit call fix (Randy Dunlap)
o More build ia-32 on x86-64 bits (Arjan van de Ven)
* NFS error path fixup (Bill Rugolsky)
o Swap the coda fix in ac7 with the official (Jan Harkes)
authors fix
o Fix some problematic ptrace/kill interactions (Roland McGrath)
o Fix ptrace/coredump problems with threaded (Roland McGrath)
apps
2.6.10-ac7
+ Fix failure at boot with some setups and ac6 (Alan Cox)
| Dumb bug indeed
o Fix random poolsize sysctl (Brad Spengler)
o Fix scsi_ioctl leak (Brad Spengler)
o Fix rlimit memlock (Brad Spengler)
o Fix Moxa serial (Alan Cox)
| While moxa won't actually even build on 2.6 the grsecurity fix
| is wrong (for 2.2, 2.4 as well). Without it being CAP_SYS_RAWIO
| a user can insert alternative bios firmware into the card.
2.6.10-ac6
+ Fix ide-pnp build (Alan Cox)
o do_brk security fixes (Marcelo Tosatti)
| slightly reworked
o Fixes for Coverity Inc reported bugs (Alan Cox)
- coda_pioctl
- xfs_attrmulti_by_handle
- br_ioctl
- rose_rt_ioctl
- sdla_xfer
o Improve the no-overcommit behaviour (Andries Brouwer)
2.6.10-ac5
+ Remove obsolete usb_unlink_urb in pwc (Alan Cox)
| From instructions by Dwaine Garden
* Subset of ALSA updates to fix sound bugs in .10 (Takashi Iwai)
| This is the set Takashi kindly identified as being
| worth applying for 10-ac.
o First run at merging ISI and base isicom driver (Alan Cox)
into a working 2.6 driver
+ IDE mode selection fixes for IT821x PIO (Alan Cox)
| Bug noted by Bartlomiej
o Fix a 32bit compatibility error in the cmsg (Olaf Kirch)
check logic
* Hopefully fix CD-ROM autoclose (Stas Sergeev)
o Disable sidewinder debugging spew (Michael Marineau)
o Openprom fixes (Al Viro)
o Fix cosa module crash on load (Jan Kasprzak)
o Add the build environment bits to kernel (Kevin Fenzi)
make rpm output
* Fix megaraid unload oops (Al Viro)
* Make gconfig work with current gtk 2.4 (J Magallon)
* Fix harmless parport overflow by one (Alexander Nyberg)
* Fix drivers that put a '/' in /proc/irq/.. (Olaf Hering)
2.6.10-ac4
o Initial fixes for /dev/tty v setsid() crash (Alan Cox)
[/dev/tty v vhangup needs more work]
+ Fixed AGP compile on ia-32 (Arjan van de Ven)
+ PPC fixes (Dave Jones)
o Document irqpoll/irqfixup (Alan Cox)
o IBM ACPI reference __exit unsafely (Arjan van de Ven)
o Allow pwc to be compiled into the kernel (Christian Hesse)
2.6.10-ac3
* Fix a pile of mmc warnings/errors (Russell King)
* Fix acpi video memory corruption (Linus Torvalds)
* Fix module param breakage in parport_pc (Randy Dunlap)
* Intel ICH7 IDE support and $PIR support (Jason Gaston)
o Intel ICH7 SATA support (Jason Gaston)
o Intel ICH7 I2C support (Jason Gaston)
o Fix an IDE CD-ROM crash/BUG case (Prarit Bhargava)
* Swap -ac AGP annotations for head AGP fixes (Dave Jones,
Bjorn Helgaas,
Masao Takahashi)
o Add proper delaying/sleeping ide_pci_unregister (Alan Cox)
o Do the same for PCMCIA (ide_cs) and ISA PnP (Alan Cox)
o Use msleep for ide-cd and ide-cs (Nishanth Aravamudan)
o Fix missing type in lapic_shutdown (Miael Pettersson)
o Fix some missing build dependancies for CX88 (Adrian Bunk)
o Move pwc to use remap_pfn_range (Arjan van de Ven)
2.6.10-ac2
o Fix printk fixes for geometry free drives (Alan Cox)
| Found by Bartlomiej
o Bartlomiej's requested cleanups for IT8212 (Alan Cox)
X Drop unneeded i810 audio patch
X Drop useless kmalloc size patch
+ Fix proposed ide ISA v PIO change to work (Alan Cox)
| Bug noted by .. everyone
* Backport mxser compile fix (Al Viro)
* Backport via acpi irq routing fixes (Len Brown, Shaohua Li)
| Replaces the old -ac fix
* Backport further aacraid chipset support (Mark Haverkamp)
* ULi 5281 support (Peer Chen)
* Backport several libata fixes notably problems (Albert Lee)
with PDC20275
o FW_LOADER is needed by several dvb devices (Michal Feix)
o Add IT8211 PCI identifiers to IT8212 and (Alan Cox)
rename driver and functions it iT821x
| Thanks to Philipp Imhof for the IT8211 idents
o Clean up and merge LAN M526X support (Clear Zhang)
| 2.6 port/slight tidy done on the original
2.6.10-ac1
o Revert AX.25 protocol breakage (Alan Cox)
o Remove bogus obsolete option junk from 2.6.10 (Alan Cox)
ide changes
| Options are often useful, so should be kept.
| Especially stuff like serialize
o Fix bogus dma_ naming in the 2.6.10 patch (Alan Cox)
o Initial CS5520 fixups for VDMA and 2.6.10
| Must set vdma flag before command issue
| ?? could we just set it at boot and leave it - probably (check)
Forward ported from 2.6.9-ac
o Smbfs improved parsing fixes (Chuck Ebbert)
o Fix several IDE drivers that assumed > 0 was (Alan Cox)
also an error return for pci probe functions
* Fix sys5 semaphore wakeups (Manfred Spraul)
o Suggest irqpoll when we get screaming irqs (Alan Cox)
o Fix reset problems with older 3c59x/3c90x (John Linville)
o Configurable 100/1Khz clock for x86 (James Bottomley)
| 100Hz is great for battery life
o Delkin cardbus IDE support (Mark Lord)
o IT8212 IDE support (Alan Cox)
X Add more AC97 table data
o Token ring locking fix
o Fix URL for lanana (Alexander Stohr)
X Add a 1620 byte slab cache for ethernet frames (Arjan van de Ven)
* EDD boot options (Matt Domsch)
o Don't probe legacy ISA ide2,3,4,5 on PCI boxes (Alan Cox)
o Restore PWC driver (Luc Saillard)
| Please port away from remap_page_range
o Fix AT2701FX AMD PCnet32 on fibre (Guido Guenther)
* Fix build of CS461x gameport (Adrian Bunk)
o Fix crash with aacraid double complete (Mark Salyzyn, Tom Coughlan,
Alan Cox)
* Fix getblk_slow hang (Chris Mason)
+ Fix SMP hang with IDE unregister (Mark Lord)
o Working IDE locking (Alan Cox)
| And a great deal of review by Bartlomiej
o Allow IDE to grab all unknown generic IDE (Alan Cox)
devices (boot with "all-generic-ide")
o More ATI IDE PCI identifiers (Enrico Scholz)
o Initial patch for ide_abort hang (Alan Cox)
o Fix serveral ide timing violations on reset (Alan Cox)
* Support CSB6-R Serverworks raid (Alan Cox)
o Teach ide-cd to use sense data for file system (Alan Cox)
requests
- This means you get better diagonstics on CD errors
- It means a partial I/O failure will get you back the ok sectors
- It may fix the problem some users have with ISO copying and ide-cd
o Lock ide-proc against driver unload (Alan Cox)
(very low severity)
o Fix ide /proc and legacy devices problem (Alan Cox)
* Watchdog support for early cobalt ALi hardware (Mike Waychison)
* Make sx8 naming follow LANANA (Jeremy Katz)
* Don't warn on scsi ioctl kmalloc fail (Arjan van de Ven)
* Fix Paul Laufer's email address (Paul Laufer)
* Fix misleading microcode message (Arjan van de Ven)
o Allow cross compile of x86_32 kernel on x86_64 (Arjan van de Ven)
o Kill "open failed" cdrom message. (Alan Cox)
| This is a natural event from code poking around
| doing CD detection etc
* Minor typo fix in cdrom driver (efalk@google)
* Add support for newer ALi AGP (Clear Zhang)
o Handle E7xxx boxes with USB legacy flaws (Alan Cox)
Cleanups in porting
o Drop ->taskfile hooks in the IDE layer (Alan Cox)
(->fixup replaces)
o Fix up IT8212 for 2.6.10 ide_use_dma cleanups (Alan Cox)
and other 2.6.10 cleaning
Dropped for now
o VIA extra quirk
o HP Cardbus routing fixup
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux 2.6.10-ac9
2005-01-13 17:23 Linux 2.6.10-ac9 Alan Cox
@ 2005-01-14 3:01 ` Sami Farin
2005-01-15 0:32 ` Alan Cox
2005-01-16 11:11 ` Ralf Hildebrandt
1 sibling, 1 reply; 6+ messages in thread
From: Sami Farin @ 2005-01-14 3:01 UTC (permalink / raw)
To: Linux Kernel Mailing List
On Thu, Jan 13, 2005 at 05:23:29PM +0000, Alan Cox wrote:
> Arjan van de Ven is now building RPMS of the kernel and those can be found
> in the RPM subdirectory and should be yum-able. Expect the RPMS to lag the
> diff a little as the RPM builds and tests do take time.
>
>
> Key: o - only in -ac
> * - already fixed upstream
> X - discarded later as wrong
> + - ac specific (fix not relevant to non -ac)
>
> 2.6.10-ac9
> * 2.6.10 variant of the stack race fix (Alan Cox)
> | Found by Paul Staretz
> * Stronger ELF validity checks (Solar Designer)
> * Add ATI SATA identifiers (Frederick Li)
> o Update ATI PATA/SATA support (Frederick Li)
> * Audit fixups (Steve Grubb, Roger Luethi)
> * FPU/signal handling fix (Bodo Stroesser)
> * nForce2 APIC/LAPIC errata fixup (Prakash Punnoor)
> * Swap aacraid fix in -ac with 2.6.11rc base fix (Tom Coughlan)
> * Connnection track/rst fix (Martin Josefsson)
> o Format ide printk's more nicely (Gunther Mayer)
> o Stallion serial resurrection (part one) (Wayne Meissner)
> * Fix nls_ascii (Ogawa Hirofumi)
> * Count writeback pages in nr_scanned (Rik van Riel)
> | OOM fixing
> o Revert ac97_patch changes (Jules Villard)
> | with this change many users get no sound out
> o Correct handling of some module parameter (Rusty Russell)
> errors
with 2.6.10-ac7/ac8 I did not have problems with sound,
but with ac9 I got these problems:
at boot, sometimes /dev/dsp and /dev/snd/pcm* do not get created,
despite modules are loaded and /proc/interrupts shows IRQ 5 for
Ensoniq AudioPCI (but count stays at 0).
(I just upgraded to udev-0.50, too...)
first, full lspci output:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00: 86 80 90 71 06 00 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e4000000-e7ffffff
Prefetchable memory behind bridge: e8000000-e8ffffff
Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00: 86 80 91 71 07 01 20 02 03 00 04 06 00 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 40 d0 d0 a0 22
20: 00 e4 f0 e7 00 e8 f0 e8 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88 00
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 86 80 10 71 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00: 86 80 11 71 05 00 80 02 01 80 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at e000 [size=32]
00: 86 80 12 71 05 00 80 02 01 00 03 0c 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00: 86 80 13 71 03 00 80 02 02 00 80 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Surecom Technology EP-320X-R
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at e9000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 40 00 00
10: 01 e4 00 00 00 00 00 e9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 bd 10 20 03
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40
00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e9001000 (32-bit, prefetchable) [size=4K]
00: 9e 10 6e 03 06 00 80 02 02 00 00 04 00 40 80 00
10: 08 10 00 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 10 28
00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e9002000 (32-bit, prefetchable) [size=4K]
00: 9e 10 78 08 06 00 80 02 02 00 80 04 00 40 80 00
10: 08 20 00 e9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 00 eb 13
30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 04 ff
00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 74 12 71 13 05 00 10 04 06 00 01 04 00 40 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 74 12 71 13
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 0c 80
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at ec00 [size=256]
Region 1: Memory at e9003000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 40 00 00
10: 01 ec 00 00 00 30 00 e9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G200 AGP
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=8M]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2
00: 2b 10 21 05 07 00 90 02 01 00 00 03 08 40 00 00
10: 08 00 00 e8 00 00 00 e4 00 00 00 e5 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 2b 10 03 ff
30: 00 00 00 00 dc 00 00 00 00 00 00 00 ff 01 10 20
at this spot I have no /dev/dsp etc.
then I reload snd_ens1371:
00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort- >SERR- <PERR-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-00: 74 12 71 13 05 00 10 04 06 00 01 04 00 40 00 00
+00: 74 12 71 13 05 00 10 14 06 00 01 04 00 40 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 74 12 71 13
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 0c 80
I have /dev/dsp but no /dev/snd/control* so no sound.
then I remove every module related to sound.
00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort- >SERR- <PERR-
- Latency: 64 (3000ns min, 32000ns max)
+ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-00: 74 12 71 13 05 00 10 14 06 00 01 04 00 40 00 00
+ Status: D3 PME-Enable- DSel=0 DScale=0 PME-
+00: 74 12 71 13 01 00 10 34 06 00 01 04 00 40 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 74 12 71 13
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 0c 80
then I run "modprobe snd_ens1371".
I now get dsp and control, all works.
00:0d.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
+ Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
- Status: D3 PME-Enable- DSel=0 DScale=0 PME-
-00: 74 12 71 13 01 00 10 34 06 00 01 04 00 40 00 00
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+00: 74 12 71 13 05 00 10 34 06 00 01 04 00 40 00 00
10: 01 e8 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 74 12 71 13
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 0c 80
also, with 2.6.10 I can't disable write cache...
I could do it in 2.6.9.
# hdparm -I /dev/hda | grep "Write cache" ; hdparm -W0 /dev/hda ; hdparm -I /dev/hda | grep "Write cache"
* Write cache
/dev/hda:
setting drive write-caching to 0 (off)
* Write cache
--
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux 2.6.10-ac9
2005-01-14 3:01 ` Sami Farin
@ 2005-01-15 0:32 ` Alan Cox
2005-01-15 5:07 ` Sami Farin
0 siblings, 1 reply; 6+ messages in thread
From: Alan Cox @ 2005-01-15 0:32 UTC (permalink / raw)
To: Sami Farin; +Cc: Linux Kernel Mailing List
On Gwe, 2005-01-14 at 03:01, Sami Farin wrote:
> at this spot I have no /dev/dsp etc.
> then I reload snd_ens1371:
That sounds like the new udev rather than kernel side. The changes from
ac8 to ac9 are tiny on the audio side and don't involve driver setup
stuff.
> also, with 2.6.10 I can't disable write cache...
> I could do it in 2.6.9.
Works for me in 2.6.10-ac. Are there any diagnostics on dmesg when you
try and turn the cache off ?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux 2.6.10-ac9
2005-01-15 0:32 ` Alan Cox
@ 2005-01-15 5:07 ` Sami Farin
2005-01-16 0:58 ` Alan Cox
0 siblings, 1 reply; 6+ messages in thread
From: Sami Farin @ 2005-01-15 5:07 UTC (permalink / raw)
To: Linux Kernel Mailing List; +Cc: Alan Cox
On Sat, Jan 15, 2005 at 12:32:59AM +0000, Alan Cox wrote:
> On Gwe, 2005-01-14 at 03:01, Sami Farin wrote:
> > at this spot I have no /dev/dsp etc.
> > then I reload snd_ens1371:
>
> That sounds like the new udev rather than kernel side. The changes from
> ac8 to ac9 are tiny on the audio side and don't involve driver setup
> stuff.
>
> > also, with 2.6.10 I can't disable write cache...
> > I could do it in 2.6.9.
>
> Works for me in 2.6.10-ac. Are there any diagnostics on dmesg when you
> try and turn the cache off ?
no, nothing.
how do I know now is hdparm -I or -W lying?
(-I says it's enabled and -W0 says it was disabled just fine.)
my drives do not support cache flushes, I guess your drives do?
drivers/ide/ide-disk.c:write_cache()
if (!ide_id_has_flush_cache(drive->id))
return 1;
cat /proc/ide/hda/settings does not work, either
cat D C0572788 0 8016 5187 6044 (NOTLB)
cdc97eb0 00000046 cf7f00a0 c0572788 00005699 c01fe93f 000001ad 00000023
01078345 00005699 cf7f00a0 00000bbb 02ed12c3 00005699 cfec51d8 c04de020
cfec5080 00000246 cdc97ee8 c0409764 c04de028 00000001 cfec5080 c011ab70
Call Trace:
[<c0409764>] __down+0x64/0xc0
[<c04098ba>] __down_failed+0xa/0x10
[<c0302acf>] .text.lock.ide_proc+0x8b/0x1fc
[<c018c594>] proc_file_read+0xc4/0x260
[<c0158fbf>] vfs_read+0xcf/0x150
[<c01592db>] sys_read+0x4b/0x80
[<c0103163>] syscall_call+0x7/0xb
--
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux 2.6.10-ac9
2005-01-15 5:07 ` Sami Farin
@ 2005-01-16 0:58 ` Alan Cox
0 siblings, 0 replies; 6+ messages in thread
From: Alan Cox @ 2005-01-16 0:58 UTC (permalink / raw)
To: Sami Farin; +Cc: Linux Kernel Mailing List
On Sad, 2005-01-15 at 05:07, Sami Farin wrote:
> my drives do not support cache flushes, I guess your drives do?
Probably yes.
> cat /proc/ide/hda/settings does not work, either
>
> cat D C0572788 0 8016 5187 6044 (NOTLB)
> cdc97eb0 00000046 cf7f00a0 c0572788 00005699 c01fe93f 000001ad 00000023
> 01078345 00005699 cf7f00a0 00000bbb 02ed12c3 00005699 cfec51d8 c04de020
> cfec5080 00000246 cdc97ee8 c0409764 c04de028 00000001 cfec5080 c011ab70
> Call Trace:
> [<c0409764>] __down+0x64/0xc0
> [<c04098ba>] __down_failed+0xa/0x10
> [<c0302acf>] .text.lock.ide_proc+0x8b/0x1fc
> [<c018c594>] proc_file_read+0xc4/0x260
> [<c0158fbf>] vfs_read+0xcf/0x150
> [<c01592db>] sys_read+0x4b/0x80
> [<c0103163>] syscall_call+0x7/0xb
Duplicated and fixed for -ac10 coming up soon. Thanks for that one,
thats was a very dumb bug 8)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Linux 2.6.10-ac9
2005-01-13 17:23 Linux 2.6.10-ac9 Alan Cox
2005-01-14 3:01 ` Sami Farin
@ 2005-01-16 11:11 ` Ralf Hildebrandt
1 sibling, 0 replies; 6+ messages in thread
From: Ralf Hildebrandt @ 2005-01-16 11:11 UTC (permalink / raw)
To: Linux Kernel Mailing List
* Alan Cox <alan@lxorguk.ukuu.org.uk>:
> 2.6.10-ac9
I tried building it with gcc-4.0 -- while the build went fine, it just
wouldn't boot (which doesn't suprise me a bit). Why is that?
--
Ralf Hildebrandt (i.A. des IT-Zentrum) Ralf.Hildebrandt@charite.de
Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962
IT-Zentrum Standort CBF send no mail to spamtrap@charite.de
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-01-16 11:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-13 17:23 Linux 2.6.10-ac9 Alan Cox
2005-01-14 3:01 ` Sami Farin
2005-01-15 0:32 ` Alan Cox
2005-01-15 5:07 ` Sami Farin
2005-01-16 0:58 ` Alan Cox
2005-01-16 11:11 ` Ralf Hildebrandt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox