* Re: Disabling IRQ #xx, because nobody cared!
[not found] <fa.kb79h86.1k60j00@ifi.uio.no>
@ 2005-01-31 7:41 ` William Park
0 siblings, 0 replies; 2+ messages in thread
From: William Park @ 2005-01-31 7:41 UTC (permalink / raw)
To: linux-kernel
On Sat, Jan 29, 2005 at 04:32:12AM +0000, William Park wrote:
> I'm runing 2.6.10 SMP. I usually use APM, but I decided to try ACPI.
> On my machine, USB (integrated) and Audio (PCI card) shares IRQ:
...
> After a while, I get
>
> irq 185: nobody cared!
> [<c01339e2>] __report_bad_irq+0x22/0x90
> [<c0133ad8>] note_interrupt+0x58/0x90
> [<c0133578>] __do_IRQ+0x128/0x130
> [<c0104eba>] do_IRQ+0x1a/0x30
> [<c010370a>] common_interrupt+0x1a/0x20
> [<c0100690>] default_idle+0x0/0x40
> [<c01006ba>] default_idle+0x2a/0x40
> [<c0100760>] cpu_idle+0x40/0x70
> handlers:
> [<e086e000>] (snd_audiopci_interrupt+0x0/0xc0 [snd_ens1371])
> Disabling IRQ #185
>
> Then, after some more time, I get
>
> irq 11: nobody cared!
> [<c01339e2>] __report_bad_irq+0x22/0x90
> [<c0133ad8>] note_interrupt+0x58/0x90
> [<c0133578>] __do_IRQ+0x128/0x130
> [<c0104eba>] do_IRQ+0x1a/0x30
> [<c010370a>] common_interrupt+0x1a/0x20
> [<c0100690>] default_idle+0x0/0x40
> [<c01006ba>] default_idle+0x2a/0x40
> [<c0100760>] cpu_idle+0x40/0x70
> [<c03728c7>] start_kernel+0x147/0x170
> handlers:
> [<c0227ef0>] (usb_hcd_irq+0x0/0x60)
> [<c0227ef0>] (usb_hcd_irq+0x0/0x60)
>
> At which point, USB is dead.
>
> Do you know if 'acpi' is responsible for this?
Solved! After many kernel compile and many kernel paramters,
'acpi=noirq' or 'pci=noacpi' solved the IRQ being disabled.
I'm running Abit VP6 dual-P3 (Via Apollo 133A, VT82C694X, VT82C686B).
--
William Park <opengeometry@yahoo.ca>, Toronto, Canada
Slackware Linux -- because I can type.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Disabling IRQ #xx, because nobody cared!
@ 2005-01-29 4:30 William Park
0 siblings, 0 replies; 2+ messages in thread
From: William Park @ 2005-01-29 4:30 UTC (permalink / raw)
To: linux-kernel
I'm runing 2.6.10 SMP. I usually use APM, but I decided to try ACPI.
On my machine, USB (integrated) and Audio (PCI card) shares IRQ:
CPU0 CPU1
0: 19281733 19952671 IO-APIC-edge timer
1: 51751 53105 IO-APIC-edge i8042
4: 1613559 1503569 IO-APIC-edge serial
7: 0 0 IO-APIC-edge parport0
8: 2 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
11: 149496 150504 IO-APIC-level uhci_hcd, uhci_hcd
12: 54518 50376 IO-APIC-edge i8042
14: 63398 63535 IO-APIC-edge ide0
15: 1 1 IO-APIC-edge ide1
169: 11440 11565 IO-APIC-level ide2
177: 456415 456480 IO-APIC-level eth0
185: 50307 49693 IO-APIC-level Ensoniq AudioPCI
NMI: 0 0
LOC: 39235997 39236069
ERR: 1
MIS: 0
After a while, I get
irq 185: nobody cared!
[<c01339e2>] __report_bad_irq+0x22/0x90
[<c0133ad8>] note_interrupt+0x58/0x90
[<c0133578>] __do_IRQ+0x128/0x130
[<c0104eba>] do_IRQ+0x1a/0x30
[<c010370a>] common_interrupt+0x1a/0x20
[<c0100690>] default_idle+0x0/0x40
[<c01006ba>] default_idle+0x2a/0x40
[<c0100760>] cpu_idle+0x40/0x70
handlers:
[<e086e000>] (snd_audiopci_interrupt+0x0/0xc0 [snd_ens1371])
Disabling IRQ #185
Then, after some more time, I get
irq 11: nobody cared!
[<c01339e2>] __report_bad_irq+0x22/0x90
[<c0133ad8>] note_interrupt+0x58/0x90
[<c0133578>] __do_IRQ+0x128/0x130
[<c0104eba>] do_IRQ+0x1a/0x30
[<c010370a>] common_interrupt+0x1a/0x20
[<c0100690>] default_idle+0x0/0x40
[<c01006ba>] default_idle+0x2a/0x40
[<c0100760>] cpu_idle+0x40/0x70
[<c03728c7>] start_kernel+0x147/0x170
handlers:
[<c0227ef0>] (usb_hcd_irq+0x0/0x60)
[<c0227ef0>] (usb_hcd_irq+0x0/0x60)
At which point, USB is dead.
Do you know if 'acpi' is responsible for this?
--
William Park <opengeometry@yahoo.ca>, Toronto, Canada
Slackware Linux -- because I can type.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-01-31 7:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <fa.kb79h86.1k60j00@ifi.uio.no>
2005-01-31 7:41 ` Disabling IRQ #xx, because nobody cared! William Park
2005-01-29 4:30 William Park
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox