* [2.6 patch] move dp83840.h to Documentation/
@ 2005-01-31 23:41 Adrian Bunk
2005-01-31 23:46 ` David S. Miller
2005-02-01 0:02 ` [2.6 patch] move dp83840.h to Documentation/ Ralf Baechle
0 siblings, 2 replies; 6+ messages in thread
From: Adrian Bunk @ 2005-01-31 23:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Ralf Baechle, davem, jgarzik, linux-net, linux-kernel
dp83840.h is included once but none of the definitions it contains is
actually used.
Ralf Baechle wants that it stays as documentation, so this patch moves
it under Documentation/ .
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
Documentation/networking/00-INDEX | 2 +
Documentation/networking/dp83840.txt | 41 +++++++++++++++++++++++++++
drivers/net/ioc3-eth.c | 1
include/linux/dp83840.h | 41 ---------------------------
4 files changed, 43 insertions(+), 42 deletions(-)
This patch was already sent on:
- 29 Nov 2004
--- linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c.old 2004-11-29 12:14:25.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c 2004-11-29 12:14:34.000000000 +0100
@@ -56,7 +56,6 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
-#include <linux/dp83840.h>
#include <net/ip.h>
#include <asm/byteorder.h>
--- linux-2.6.10-rc2-mm3-full/include/linux/dp83840.h 2004-10-18 23:54:32.000000000 +0200
+++ /dev/null 2004-11-25 03:16:25.000000000 +0100
@@ -1,41 +0,0 @@
-/*
- * linux/dp83840.h: definitions for DP83840 MII-compatible transceivers
- *
- * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
- */
-#ifndef __LINUX_DP83840_H
-#define __LINUX_DP83840_H
-
-#include <linux/mii.h>
-
-/*
- * Data sheets and programming docs for the DP83840 are available at
- * from http://www.national.com/
- *
- * The DP83840 is capable of both 10 and 100Mbps ethernet, in both
- * half and full duplex mode. It also supports auto negotiation.
- *
- * But.... THIS THING IS A PAIN IN THE ASS TO PROGRAM!
- * Debugging eeprom burnt code is more fun than programming this chip!
- */
-
-/* First, the MII register numbers (actually DP83840 register numbers). */
-#define MII_CSCONFIG 0x17 /* CS configuration */
-
-/* The Carrier Sense config register. */
-#define CSCONFIG_RESV1 0x0001 /* Unused... */
-#define CSCONFIG_LED4 0x0002 /* Pin for full-dplx LED4 */
-#define CSCONFIG_LED1 0x0004 /* Pin for conn-status LED1 */
-#define CSCONFIG_RESV2 0x0008 /* Unused... */
-#define CSCONFIG_TCVDISAB 0x0010 /* Turns off the transceiver */
-#define CSCONFIG_DFBYPASS 0x0020 /* Bypass disconnect function */
-#define CSCONFIG_GLFORCE 0x0040 /* Good link force for 100mbps */
-#define CSCONFIG_CLKTRISTATE 0x0080 /* Tristate 25m clock */
-#define CSCONFIG_RESV3 0x0700 /* Unused... */
-#define CSCONFIG_ENCODE 0x0800 /* 1=MLT-3, 0=binary */
-#define CSCONFIG_RENABLE 0x1000 /* Repeater mode enable */
-#define CSCONFIG_TCDISABLE 0x2000 /* Disable timeout counter */
-#define CSCONFIG_RESV4 0x4000 /* Unused... */
-#define CSCONFIG_NDISABLE 0x8000 /* Disable NRZI */
-
-#endif /* __LINUX_DP83840_H */
--- /dev/null 2004-11-25 03:16:25.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/Documentation/networking/dp83840.txt 2004-11-29 16:29:54.000000000 +0100
@@ -0,0 +1,41 @@
+/*
+ * linux/dp83840.h: definitions for DP83840 MII-compatible transceivers
+ *
+ * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
+ */
+#ifndef __LINUX_DP83840_H
+#define __LINUX_DP83840_H
+
+#include <linux/mii.h>
+
+/*
+ * Data sheets and programming docs for the DP83840 are available at
+ * from http://www.national.com/
+ *
+ * The DP83840 is capable of both 10 and 100Mbps ethernet, in both
+ * half and full duplex mode. It also supports auto negotiation.
+ *
+ * But.... THIS THING IS A PAIN IN THE ASS TO PROGRAM!
+ * Debugging eeprom burnt code is more fun than programming this chip!
+ */
+
+/* First, the MII register numbers (actually DP83840 register numbers). */
+#define MII_CSCONFIG 0x17 /* CS configuration */
+
+/* The Carrier Sense config register. */
+#define CSCONFIG_RESV1 0x0001 /* Unused... */
+#define CSCONFIG_LED4 0x0002 /* Pin for full-dplx LED4 */
+#define CSCONFIG_LED1 0x0004 /* Pin for conn-status LED1 */
+#define CSCONFIG_RESV2 0x0008 /* Unused... */
+#define CSCONFIG_TCVDISAB 0x0010 /* Turns off the transceiver */
+#define CSCONFIG_DFBYPASS 0x0020 /* Bypass disconnect function */
+#define CSCONFIG_GLFORCE 0x0040 /* Good link force for 100mbps */
+#define CSCONFIG_CLKTRISTATE 0x0080 /* Tristate 25m clock */
+#define CSCONFIG_RESV3 0x0700 /* Unused... */
+#define CSCONFIG_ENCODE 0x0800 /* 1=MLT-3, 0=binary */
+#define CSCONFIG_RENABLE 0x1000 /* Repeater mode enable */
+#define CSCONFIG_TCDISABLE 0x2000 /* Disable timeout counter */
+#define CSCONFIG_RESV4 0x4000 /* Unused... */
+#define CSCONFIG_NDISABLE 0x8000 /* Disable NRZI */
+
+#endif /* __LINUX_DP83840_H */
--- linux-2.6.10-rc2-mm3-full/Documentation/networking/00-INDEX.old 2004-11-29 16:32:03.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/Documentation/networking/00-INDEX 2004-11-29 16:33:10.000000000 +0100
@@ -42,6 +42,8 @@
- the Digi International RightSwitch SE-X Ethernet driver
dmfe.txt
- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
+dp83840.txt
+ - the former dp83840.h
e100.txt
- info on Intel's EtherExpress PRO/100 line of 10/100 boards
e1000.txt
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6 patch] move dp83840.h to Documentation/
2005-01-31 23:41 [2.6 patch] move dp83840.h to Documentation/ Adrian Bunk
@ 2005-01-31 23:46 ` David S. Miller
2005-01-31 23:57 ` Jeff Garzik
2005-02-01 0:29 ` [2.6 patch] remove dp83840.h Adrian Bunk
2005-02-01 0:02 ` [2.6 patch] move dp83840.h to Documentation/ Ralf Baechle
1 sibling, 2 replies; 6+ messages in thread
From: David S. Miller @ 2005-01-31 23:46 UTC (permalink / raw)
To: Adrian Bunk; +Cc: akpm, ralf, davem, jgarzik, linux-net, linux-kernel
On Tue, 1 Feb 2005 00:41:58 +0100
Adrian Bunk <bunk@stusta.de> wrote:
> dp83840.h is included once but none of the definitions it contains is
> actually used.
>
> Ralf Baechle wants that it stays as documentation, so this patch moves
> it under Documentation/ .
No, let's kill this thing altogether. The only driver in the world
using the CSCONFIG_* defines in there is the sunhme driver and it
defines it's own macros in drivers/net/sunhme.h This header is more
than useless these days.
The header still exists in older trees and the revision history.
So people can still get to it there.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6 patch] move dp83840.h to Documentation/
2005-01-31 23:46 ` David S. Miller
@ 2005-01-31 23:57 ` Jeff Garzik
2005-02-01 0:29 ` [2.6 patch] remove dp83840.h Adrian Bunk
1 sibling, 0 replies; 6+ messages in thread
From: Jeff Garzik @ 2005-01-31 23:57 UTC (permalink / raw)
To: David S. Miller; +Cc: Adrian Bunk, akpm, ralf, davem, linux-net, linux-kernel
David S. Miller wrote:
> On Tue, 1 Feb 2005 00:41:58 +0100
> Adrian Bunk <bunk@stusta.de> wrote:
>
>
>>dp83840.h is included once but none of the definitions it contains is
>>actually used.
>>
>>Ralf Baechle wants that it stays as documentation, so this patch moves
>>it under Documentation/ .
>
>
> No, let's kill this thing altogether. The only driver in the world
> using the CSCONFIG_* defines in there is the sunhme driver and it
> defines it's own macros in drivers/net/sunhme.h This header is more
> than useless these days.
>
> The header still exists in older trees and the revision history.
> So people can still get to it there.
agreed
^ permalink raw reply [flat|nested] 6+ messages in thread
* [2.6 patch] remove dp83840.h
2005-01-31 23:46 ` David S. Miller
2005-01-31 23:57 ` Jeff Garzik
@ 2005-02-01 0:29 ` Adrian Bunk
2005-02-02 5:34 ` Jeff Garzik
1 sibling, 1 reply; 6+ messages in thread
From: Adrian Bunk @ 2005-02-01 0:29 UTC (permalink / raw)
To: David S. Miller; +Cc: akpm, ralf, davem, jgarzik, linux-net, linux-kernel
On Mon, Jan 31, 2005 at 03:46:07PM -0800, David S. Miller wrote:
> On Tue, 1 Feb 2005 00:41:58 +0100
> Adrian Bunk <bunk@stusta.de> wrote:
>
> > dp83840.h is included once but none of the definitions it contains is
> > actually used.
> >
> > Ralf Baechle wants that it stays as documentation, so this patch moves
> > it under Documentation/ .
>
> No, let's kill this thing altogether. The only driver in the world
> using the CSCONFIG_* defines in there is the sunhme driver and it
> defines it's own macros in drivers/net/sunhme.h This header is more
> than useless these days.
>
> The header still exists in older trees and the revision history.
> So people can still get to it there.
OK, patch below
cu
Adrian
<-- snip -->
dp83840.h is included once but none of the definitions it contains is
actually used.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/net/ioc3-eth.c | 1
include/linux/dp83840.h | 41 ---------------------------
2 files changed, 42 deletions(-)
--- linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c.old 2004-11-29 12:14:25.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c 2004-11-29 12:14:34.000000000 +0100
@@ -56,7 +56,6 @@
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
-#include <linux/dp83840.h>
#include <net/ip.h>
#include <asm/byteorder.h>
--- linux-2.6.10-rc2-mm3-full/include/linux/dp83840.h 2004-10-18 23:54:32.000000000 +0200
+++ /dev/null 2004-11-25 03:16:25.000000000 +0100
@@ -1,41 +0,0 @@
-/*
- * linux/dp83840.h: definitions for DP83840 MII-compatible transceivers
- *
- * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
- */
-#ifndef __LINUX_DP83840_H
-#define __LINUX_DP83840_H
-
-#include <linux/mii.h>
-
-/*
- * Data sheets and programming docs for the DP83840 are available at
- * from http://www.national.com/
- *
- * The DP83840 is capable of both 10 and 100Mbps ethernet, in both
- * half and full duplex mode. It also supports auto negotiation.
- *
- * But.... THIS THING IS A PAIN IN THE ASS TO PROGRAM!
- * Debugging eeprom burnt code is more fun than programming this chip!
- */
-
-/* First, the MII register numbers (actually DP83840 register numbers). */
-#define MII_CSCONFIG 0x17 /* CS configuration */
-
-/* The Carrier Sense config register. */
-#define CSCONFIG_RESV1 0x0001 /* Unused... */
-#define CSCONFIG_LED4 0x0002 /* Pin for full-dplx LED4 */
-#define CSCONFIG_LED1 0x0004 /* Pin for conn-status LED1 */
-#define CSCONFIG_RESV2 0x0008 /* Unused... */
-#define CSCONFIG_TCVDISAB 0x0010 /* Turns off the transceiver */
-#define CSCONFIG_DFBYPASS 0x0020 /* Bypass disconnect function */
-#define CSCONFIG_GLFORCE 0x0040 /* Good link force for 100mbps */
-#define CSCONFIG_CLKTRISTATE 0x0080 /* Tristate 25m clock */
-#define CSCONFIG_RESV3 0x0700 /* Unused... */
-#define CSCONFIG_ENCODE 0x0800 /* 1=MLT-3, 0=binary */
-#define CSCONFIG_RENABLE 0x1000 /* Repeater mode enable */
-#define CSCONFIG_TCDISABLE 0x2000 /* Disable timeout counter */
-#define CSCONFIG_RESV4 0x4000 /* Unused... */
-#define CSCONFIG_NDISABLE 0x8000 /* Disable NRZI */
-
-#endif /* __LINUX_DP83840_H */
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6 patch] move dp83840.h to Documentation/
2005-01-31 23:41 [2.6 patch] move dp83840.h to Documentation/ Adrian Bunk
2005-01-31 23:46 ` David S. Miller
@ 2005-02-01 0:02 ` Ralf Baechle
1 sibling, 0 replies; 6+ messages in thread
From: Ralf Baechle @ 2005-02-01 0:02 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, davem, jgarzik, linux-net, linux-kernel
On Tue, Feb 01, 2005 at 12:41:58AM +0100, Adrian Bunk wrote:
>
> dp83840.h is included once but none of the definitions it contains is
> actually used.
>
> Ralf Baechle wants that it stays as documentation, so this patch moves
> it under Documentation/ .
Under Documentation is certainly not the right place for a piece of code,
so let's do it as David says.
Ralf
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2005-02-02 5:35 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-31 23:41 [2.6 patch] move dp83840.h to Documentation/ Adrian Bunk
2005-01-31 23:46 ` David S. Miller
2005-01-31 23:57 ` Jeff Garzik
2005-02-01 0:29 ` [2.6 patch] remove dp83840.h Adrian Bunk
2005-02-02 5:34 ` Jeff Garzik
2005-02-01 0:02 ` [2.6 patch] move dp83840.h to Documentation/ Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox