[2.6 patch] remove dp83840.h

[Adrian Bunk <bunk@stusta.de>]

On Mon, Jan 31, 2005 at 03:46:07PM -0800, David S. Miller wrote:
> On Tue, 1 Feb 2005 00:41:58 +0100
> Adrian Bunk <bunk@stusta.de> wrote:
> 
> > dp83840.h is included once but none of the definitions it contains is
> > actually used.
> > 
> > Ralf Baechle wants that it stays as documentation, so this patch moves 
> > it under Documentation/ .
> 
> No, let's kill this thing altogether.  The only driver in the world
> using the CSCONFIG_* defines in there is the sunhme driver and it
> defines it's own macros in drivers/net/sunhme.h  This header is more
> than useless these days.
> 
> The header still exists in older trees and the revision history.
> So people can still get to it there.

OK, patch below

cu
Adrian


<--  snip  -->


dp83840.h is included once but none of the definitions it contains is
actually used.

Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 drivers/net/ioc3-eth.c               |    1 
 include/linux/dp83840.h              |   41 ---------------------------
 2 files changed, 42 deletions(-)

--- linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c.old	2004-11-29 12:14:25.000000000 +0100
+++ linux-2.6.10-rc2-mm3-full/drivers/net/ioc3-eth.c	2004-11-29 12:14:34.000000000 +0100
@@ -56,7 +56,6 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/skbuff.h>
-#include <linux/dp83840.h>
 #include <net/ip.h>
 
 #include <asm/byteorder.h>
--- linux-2.6.10-rc2-mm3-full/include/linux/dp83840.h	2004-10-18 23:54:32.000000000 +0200
+++ /dev/null	2004-11-25 03:16:25.000000000 +0100
@@ -1,41 +0,0 @@
-/*
- * linux/dp83840.h: definitions for DP83840 MII-compatible transceivers
- *
- * Copyright (C) 1996, 1999 David S. Miller (davem@redhat.com)
- */
-#ifndef __LINUX_DP83840_H
-#define __LINUX_DP83840_H
-
-#include <linux/mii.h>
-
-/*
- * Data sheets and programming docs for the DP83840 are available at
- * from http://www.national.com/
- *
- * The DP83840 is capable of both 10 and 100Mbps ethernet, in both
- * half and full duplex mode.  It also supports auto negotiation.
- *
- * But.... THIS THING IS A PAIN IN THE ASS TO PROGRAM!
- * Debugging eeprom burnt code is more fun than programming this chip!
- */
-
-/* First, the MII register numbers (actually DP83840 register numbers). */
-#define MII_CSCONFIG        0x17        /* CS configuration            */
-
-/* The Carrier Sense config register. */
-#define CSCONFIG_RESV1          0x0001  /* Unused...                   */
-#define CSCONFIG_LED4           0x0002  /* Pin for full-dplx LED4      */
-#define CSCONFIG_LED1           0x0004  /* Pin for conn-status LED1    */
-#define CSCONFIG_RESV2          0x0008  /* Unused...                   */
-#define CSCONFIG_TCVDISAB       0x0010  /* Turns off the transceiver   */
-#define CSCONFIG_DFBYPASS       0x0020  /* Bypass disconnect function  */
-#define CSCONFIG_GLFORCE        0x0040  /* Good link force for 100mbps */
-#define CSCONFIG_CLKTRISTATE    0x0080  /* Tristate 25m clock          */
-#define CSCONFIG_RESV3          0x0700  /* Unused...                   */
-#define CSCONFIG_ENCODE         0x0800  /* 1=MLT-3, 0=binary           */
-#define CSCONFIG_RENABLE        0x1000  /* Repeater mode enable        */
-#define CSCONFIG_TCDISABLE      0x2000  /* Disable timeout counter     */
-#define CSCONFIG_RESV4          0x4000  /* Unused...                   */
-#define CSCONFIG_NDISABLE       0x8000  /* Disable NRZI                */
-
-#endif /* __LINUX_DP83840_H */