From: Pete Zaitcev <zaitcev@redhat.com>
To: Peter Osterlund <petero2@telia.com>
Cc: vojtech@suse.cz, linux-kernel@vger.kernel.org,
<dtor_core@ameritech.net>,
zaitcev@redhat.com
Subject: Re: Touchpad problems with 2.6.11-rc2
Date: Wed, 2 Feb 2005 14:11:17 -0800 [thread overview]
Message-ID: <20050202141117.688c8dd3@localhost.localdomain> (raw)
In-Reply-To: <m3lla64r3w.fsf@telia.com>
On 02 Feb 2005 21:57:39 +0100, Peter Osterlund <petero2@telia.com> wrote:
> Please try this patch instead. It works well with my alps touchpad. (I
> don't have a synaptics touchpad.) It does the following:
>
> * Compensates for the lack of floating point arithmetic by keeping
> track of remainders from the integer divisions.
> * Removes the xres/yres scaling so that you get the same speed in the
> X and Y directions even if your screen is not square.
> * Sets scale factors so that the speed for synaptics and alps should
> be equal to each other and equal to the synaptics speed from 2.6.10.
Thanks a lot, Peter. I think I like the result even better than the one
after the simple-minded removal that I posted. It's possible that when
I accepted the case of (pktcount == 1) it hurt smoothness.
Do you think it makes sense to zero fractions when pktcount is dropped?
Also, I think the extra unary minus is uncoth.
-- Pete
--- linux-2.6.11-rc2/drivers/input/mousedev.c 2005-01-22 14:54:14.000000000 -0800
+++ linux-2.6.11-rc2-lem/drivers/input/mousedev.c 2005-02-02 14:03:07.000000000 -0800
@@ -71,6 +71,7 @@
struct mousedev_hw_data packet;
unsigned int pkt_count;
int old_x[4], old_y[4];
+ int frac_dx, frac_dy;
unsigned long touch;
};
@@ -117,24 +118,31 @@
static void mousedev_touchpad_event(struct input_dev *dev, struct mousedev *mousedev, unsigned int code, int value)
{
- int size;
+ int size, tmp;
+ enum { FRACTION_DENOM = 100 };
if (mousedev->touch) {
+ size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
+ if (size == 0) size = xres;
switch (code) {
case ABS_X:
- size = dev->absmax[ABS_X] - dev->absmin[ABS_X];
- if (size == 0) size = xres;
fx(0) = value;
- if (mousedev->pkt_count >= 2)
- mousedev->packet.dx = ((fx(0) - fx(1)) / 2 + (fx(1) - fx(2)) / 2) * xres / (size * 2);
+ if (mousedev->pkt_count >= 2) {
+ tmp = ((value - fx(2)) * (250 * FRACTION_DENOM)) / size;
+ tmp += mousedev->frac_dx;
+ mousedev->packet.dx = tmp / FRACTION_DENOM;
+ mousedev->frac_dx = tmp - mousedev->packet.dx * FRACTION_DENOM;
+ }
break;
case ABS_Y:
- size = dev->absmax[ABS_Y] - dev->absmin[ABS_Y];
- if (size == 0) size = yres;
fy(0) = value;
- if (mousedev->pkt_count >= 2)
- mousedev->packet.dy = -((fy(0) - fy(1)) / 2 + (fy(1) - fy(2)) / 2) * yres / (size * 2);
+ if (mousedev->pkt_count >= 2) {
+ tmp = ((fy(2) - value) * (250 * FRACTION_DENOM)) / size;
+ tmp += mousedev->frac_dy;
+ mousedev->packet.dy = tmp / FRACTION_DENOM;
+ mousedev->frac_dy = tmp - mousedev->packet.dy * FRACTION_DENOM;
+ }
break;
}
}
@@ -268,6 +276,8 @@
clear_bit(0, &mousedev_mix.packet.buttons);
}
mousedev->touch = mousedev->pkt_count = 0;
+ mousedev->frac_dx = 0;
+ mousedev->frac_dy = 0;
}
else
if (!mousedev->touch)
next prev parent reply other threads:[~2005-02-02 22:17 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-24 3:01 Touchpad problems with 2.6.11-rc2 Pete Zaitcev
2005-01-30 11:10 ` Peter Osterlund
2005-01-31 23:15 ` Pete Zaitcev
2005-02-01 3:40 ` Dmitry Torokhov
2005-02-01 5:06 ` Pete Zaitcev
2005-02-01 5:14 ` Dmitry Torokhov
2005-02-03 11:18 ` Giuseppe Bilotta
2005-02-02 7:41 ` Pete Zaitcev
2005-02-02 10:20 ` Vojtech Pavlik
2005-02-02 15:51 ` Dmitry Torokhov
2005-02-02 15:57 ` Vojtech Pavlik
2005-02-02 16:56 ` Pete Zaitcev
2005-02-02 17:07 ` Vojtech Pavlik
2005-02-02 17:58 ` Pete Zaitcev
2005-02-02 19:11 ` Vojtech Pavlik
2005-02-02 19:39 ` Pete Zaitcev
2005-02-02 19:55 ` Vojtech Pavlik
2005-02-02 19:39 ` Dmitry Torokhov
2005-02-03 8:30 ` Alexandre Oliva
2005-02-03 8:49 ` Vojtech Pavlik
2005-02-03 15:17 ` Alexandre Oliva
2005-02-03 15:28 ` Dmitry Torokhov
2005-02-03 15:45 ` Vojtech Pavlik
2005-02-02 20:57 ` Peter Osterlund
2005-02-02 21:17 ` Dmitry Torokhov
2005-02-02 21:47 ` Peter Osterlund
2005-02-02 22:06 ` Dmitry Torokhov
2005-02-02 22:27 ` Peter Osterlund
2005-02-03 7:16 ` Dmitry Torokhov
2005-02-02 21:37 ` David Ford
2005-02-02 22:11 ` Pete Zaitcev [this message]
2005-02-02 22:58 ` Peter Osterlund
2005-02-03 6:46 ` Vojtech Pavlik
2005-02-03 21:54 ` Peter Osterlund
2005-02-04 6:17 ` Vojtech Pavlik
2005-02-04 6:40 ` Peter Osterlund
2005-02-04 6:53 ` Vojtech Pavlik
2005-02-04 7:33 ` Peter Osterlund
2005-02-04 13:25 ` Vojtech Pavlik
2005-02-04 13:23 ` Vojtech Pavlik
2005-02-03 6:59 ` Pete Zaitcev
-- strict thread matches above, loose matches on Subject: below --
2005-01-25 19:55 David Brownell
2005-01-25 21:30 ` Dmitry Torokhov
2005-01-30 11:20 ` Peter Osterlund
2005-01-30 20:59 ` David Brownell
2005-01-31 21:46 ` Pete Zaitcev
2005-01-31 22:00 ` Dmitry Torokhov
2005-02-08 10:55 Stephane Raimbault
2005-02-08 17:05 ` Peter Osterlund
2005-02-09 8:47 ` Stephane Raimbault
2005-02-09 18:09 ` Peter Osterlund
2005-02-10 8:32 ` Stephane Raimbault
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050202141117.688c8dd3@localhost.localdomain \
--to=zaitcev@redhat.com \
--cc=dtor_core@ameritech.net \
--cc=linux-kernel@vger.kernel.org \
--cc=petero2@telia.com \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox