i810 BUG summary. Was Re: [SoftwareSuspend-devel] [Announce] 2.1.7 for 2.6.11-rc4

i810 BUG summary. Was Re: [SoftwareSuspend-devel] [Announce] 2.1.7 for 2.6.11-rc4

[mhf]

Hi Nigel!

On Wednesday 16 February 2005 05:22, Nigel Cunningham wrote:
> Hi Michael.
>
> On Tue, 2005-02-15 at 22:32, mhf@berlios.de wrote:
> > - Removing intel-agp as well fixes the problem and X
> > can be started alright after resume.
>
> Did you see Karol's patch? It looks like it should
> improve your situation.

It did :-)

>
> Did you get any joy out of the posting to LKML?
>

Yes, Andrew suggested privately thqt screen should come back
as prior to S3 and Pavel sees the setfont issue as a bug.

2.6.11-rc4 i810 bugs:

1) Screen comes back in 25 line mode but scroll remains at
last set linecount. (also on all other displays tested like 
savage or sis or via.

2) setfont dies on resume from S3.

3) A scroll problem in console mode with gentoo portage and
likely othe apps which scroll lines of random length 

4) With X wo DRM random colored bands flash over the screen 
when running some programs and shellscripts as if it would 
send the data bus instead of video data to the DAC. A 
swsusp2 cycles fixes it until the next S3 cycle.

5) Then DRM (20050211 snapshot) dies on resume.

Guess it's time to find an i810 datasheet and go digging.

Otherwise, No issues seen wrt swsusp 2.1.7 on 2.6.11-rc4.

Good news is that S3 seems to be quite stable also when 
interleaved with swsusp2. There were no failures. 

Lastly, I'd like to see the ACPI alarm function work to do 
stress testing in a loop:

1) set alarm to current time + xx sec
2) enter S3 or S4/swsusp2
3) on resume triggered by alarm continue from step 1.
  
Regards
Michael

Re: i810 BUG summary. Was Re: [SoftwareSuspend-devel] [Announce] 2.1.7 for 2.6.11-rc4

[Nigel Cunningham]

Hi Michael.

Perhaps this belongs with the framebuffer devel guys? I'll copy them
now. Antonio et al, have I called it right?

Regards,

Nigel

On Thu, 2005-02-17 at 15:22, mhf@berlios.de wrote:
> Hi Nigel!
> 
> On Wednesday 16 February 2005 05:22, Nigel Cunningham wrote:
> > Hi Michael.
> >
> > On Tue, 2005-02-15 at 22:32, mhf@berlios.de wrote:
> > > - Removing intel-agp as well fixes the problem and X
> > > can be started alright after resume.
> >
> > Did you see Karol's patch? It looks like it should
> > improve your situation.
> 
> It did :-)
> 
> >
> > Did you get any joy out of the posting to LKML?
> >
> 
> Yes, Andrew suggested privately thqt screen should come back
> as prior to S3 and Pavel sees the setfont issue as a bug.
> 
> 2.6.11-rc4 i810 bugs:
> 
> 1) Screen comes back in 25 line mode but scroll remains at
> last set linecount. (also on all other displays tested like 
> savage or sis or via.
> 
> 2) setfont dies on resume from S3.
> 
> 3) A scroll problem in console mode with gentoo portage and
> likely othe apps which scroll lines of random length 
> 
> 4) With X wo DRM random colored bands flash over the screen 
> when running some programs and shellscripts as if it would 
> send the data bus instead of video data to the DAC. A 
> swsusp2 cycles fixes it until the next S3 cycle.
> 
> 5) Then DRM (20050211 snapshot) dies on resume.
> 
> Guess it's time to find an i810 datasheet and go digging.
> 
> Otherwise, No issues seen wrt swsusp 2.1.7 on 2.6.11-rc4.
> 
> Good news is that S3 seems to be quite stable also when 
> interleaved with swsusp2. There were no failures. 
> 
> Lastly, I'd like to see the ACPI alarm function work to do 
> stress testing in a loop:
> 
> 1) set alarm to current time + xx sec
> 2) enter S3 or S4/swsusp2
> 3) on resume triggered by alarm continue from step 1.
>   
> Regards
> Michael
-- 
Nigel Cunningham
Software Engineer, Canberra, Australia
http://www.cyclades.com

Ph: +61 (2) 6292 8028      Mob: +61 (417) 100 574

Re: [Linux-fbdev-devel] Re: i810 BUG summary. Was Re: [SoftwareSuspend-devel] [Announce] 2.1.7 for 2.6.11-rc4

[Antonino A. Daplas]

On Thursday 17 February 2005 12:39, Nigel Cunningham wrote:
> Hi Michael.
>
> Perhaps this belongs with the framebuffer devel guys? I'll copy them
> now. Antonio et al, have I called it right?

Is he using a framebuffer console or vgacon?

Tony

Re: [Linux-fbdev-devel] Re: i810 BUG summary. Was Re: [SoftwareSuspend-devel] [Announce] 2.1.7 for 2.6.11-rc4

[mhf]

On Thursday 17 February 2005 13:09, Antonino A. Daplas 
wrote:
> On Thursday 17 February 2005 12:39, Nigel Cunningham 
wrote:
> > Hi Michael.
> >
> > Perhaps this belongs with the framebuffer devel guys?
> > I'll copy them now. Antonio et al, have I called it
> > right?
>
> Is he using a framebuffer console or vgacon?
>
> Tony

Sorry, using vgacon and I shall be more specific next time.

Good point, I will test it also with fbcon and report back.

Thank you
Michael