From: Sebastian Fabrycki <cellsan@interia.pl>
To: linux-kernel@vger.kernel.org
Subject: USB Storage problem (usb hangs)
Date: Sun, 20 Feb 2005 18:26:08 +0100 [thread overview]
Message-ID: <20050220172608.GA2944@globtel.pl> (raw)
[-- Attachment #1: Type: text/plain, Size: 356 bytes --]
Hi.
The device is: USB2.0 to IDE 3.5" hard disk enclosure.
Producer: Seven.
Part of /var/log/messages with USB debug enabled in kernel is
attached to this email.
Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log).
Distribution: Gentoo.
I'm not subscribed to the list, pleas CC me.
--
Regards
Sebastian Fabrycki
cellsan@interia.pl
[-- Attachment #2: usb-msg.txt --]
[-- Type: text/plain, Size: 4989 bytes --]
Jan 10 23:34:30 globtel usb-storage: USB Mass Storage device detected
Jan 10 23:34:30 globtel usb-storage: -- associate_dev
Jan 10 23:34:30 globtel usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002
Jan 10 23:34:30 globtel usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Jan 10 23:34:30 globtel usb-storage: Vendor: Genesys Logic, Product: USB TO IDE
Jan 10 23:34:30 globtel usb-storage: Transport: Bulk
Jan 10 23:34:30 globtel usb-storage: Protocol: Transparent SCSI
Jan 10 23:34:30 globtel usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jan 10 23:34:30 globtel usb-storage: GetMaxLUN command result is 1, data is 0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel scsi0 : SCSI emulation for USB Mass Storage devices
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Faking INQUIRY command
Jan 10 23:34:30 globtel usb-storage: scsi cmd done, result=0x0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Jan 10 23:34:30 globtel Type: Direct-Access ANSI SCSI revision: 02
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:34:30 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:34:30 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:34:30 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:34:30 globtel usb-storage: -- transfer complete
Jan 10 23:34:30 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:34:30 globtel usb-storage: Attempting to get CSW...
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:34:40 globtel scsi.agent[7459]: Attribute /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/0:0:0:0/type does not exist
Jan 10 23:35:00 globtel usb-storage: command_abort called
Jan 10 23:35:00 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:00 globtel usb-storage: -- cancelling URB
Jan 10 23:35:00 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:00 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:00 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:00 globtel usb-storage: -- command was aborted
Jan 10 23:35:00 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:00 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:20 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:20 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:20 globtel usb-storage: scsi command aborted
Jan 10 23:35:20 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:20 globtel usb-storage: queuecommand called
Jan 10 23:35:20 globtel usb-storage: *** thread awakened.
Jan 10 23:35:20 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:35:20 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:35:20 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:35:20 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:35:20 globtel usb-storage: -- transfer complete
Jan 10 23:35:20 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:35:20 globtel usb-storage: Attempting to get CSW...
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:35:30 globtel usb-storage: command_abort called
Jan 10 23:35:30 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:30 globtel usb-storage: -- cancelling URB
Jan 10 23:35:30 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:30 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:30 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:30 globtel usb-storage: -- command was aborted
Jan 10 23:35:30 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:30 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:50 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:50 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:50 globtel usb-storage: scsi command aborted
Jan 10 23:35:50 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:50 globtel usb-storage: device_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:36:10 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:36:10 globtel usb-storage: Soft reset failed: -104
Jan 10 23:36:10 globtel usb-storage: bus_reset called
...
...
next reply other threads:[~2005-02-23 16:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-20 17:26 Sebastian Fabrycki [this message]
2005-02-23 16:22 ` USB Storage problem (usb hangs) John Stoffel
-- strict thread matches above, loose matches on Subject: below --
2005-02-20 17:34 me
2005-02-21 23:59 ` John Stoffel
2005-02-22 2:37 ` John Stoffel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050220172608.GA2944@globtel.pl \
--to=cellsan@interia.pl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox