* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
@ 2005-02-23 11:03 ` Mathieu Segaud
2005-02-23 16:32 ` 2.6.11-rc4-mm1 Robert Love
2005-02-23 13:06 ` 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ? Helge Hafting
` (15 subsequent siblings)
16 siblings, 1 reply; 96+ messages in thread
From: Mathieu Segaud @ 2005-02-23 11:03 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1313 bytes --]
Andrew Morton <akpm@osdl.org> disait dernièrement que :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
>
>
> - Various fixes and updates all over the place. Things seem to have slowed
> down a bit.
>
> - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> material, please tell me.
>
>
>
> Changes since 2.6.11-rc3-mm1:
[snip]
> +inotify.patch
>
> Not sure if this is the latest version.
it is the latest Robert Love posted against -mm kernels, but in
inotify_ignore():
static int inotify_ignore(struct inotify_device *dev, s32 wd)
{
struct inotify_watch *watch;
int ret = 0;
spin_lock(&dev->lock);
watch = dev_find_wd(dev, wd);
spin_unlock(&dev->lock); <------------- lock is released, but
if (!watch) {
ret = -EINVAL;
goto out;
}
__remove_watch(watch, dev); <---------- must be called with lock held
out:
spin_unlock(&dev->lock); <------------- anyway, lock is
return ret; released and sub_preempt_count
} BUG's on SMP and PREEMPT
__remove_watch() must be called with ->lock held on dev.
Anyway, ->lock is released after label out.
Signed-off-by: Mathieu Segaud <matt@minas-morgul.org>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: fix-double-spin_unlock-in-inotify_ignore.patch --]
[-- Type: text/x-patch, Size: 285 bytes --]
--- a/drivers/char/inotify.c 2005-02-23 11:55:21.321385752 +0100
+++ b/drivers/char/inotify.c 2005-02-23 11:55:29.772101048 +0100
@@ -952,7 +952,7 @@
spin_lock(&dev->lock);
watch = dev_find_wd(dev, wd);
- spin_unlock(&dev->lock);
+
if (!watch) {
ret = -EINVAL;
goto out;
[-- Attachment #3: Type: text/plain, Size: 117 bytes --]
--
> Can you explain this behaviour?
Yes
--
Alan
[Oh wait you want to know why...]
- Alan Cox on linux-kernel
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
2005-02-23 11:03 ` 2.6.11-rc4-mm1 Mathieu Segaud
@ 2005-02-23 13:06 ` Helge Hafting
2005-02-23 20:12 ` Andrew Morton
2005-02-23 16:37 ` 2.6.11-rc4-mm1 (VFS: Cannot open root device "301") Steven Cole
` (14 subsequent siblings)
16 siblings, 1 reply; 96+ messages in thread
From: Helge Hafting @ 2005-02-23 13:06 UTC (permalink / raw)
To: Andrew Morton, linux-kernel
This kernel came up, but my boot script complained about no /dev/hdb3
when trying to mount /var.
(I have two IDE disks on the same cable, and an IDE cdrom on another.)
They are usually hda, hdb, and hdc.
MAKEDEV hdq did not help. Looking at sysfs, it turns out that
/dev/hdq1 is at major:3 minor:1025 if I interpret things right.
(/dev/hda1 is at 3:1, which is correct.)
These numbers did not work with my mknod, it created 7:1 instead.
So I didn't get to test this mysterious device.
But I assume this is a mistake of some sort, I haven't heard about any
change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
It may be interesting to note that my root raid-1 came up fine,
consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
Helge Hafting
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 13:06 ` 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ? Helge Hafting
@ 2005-02-23 20:12 ` Andrew Morton
2005-02-23 22:36 ` Laurent Riffard
2005-02-23 23:32 ` Mathieu Segaud
0 siblings, 2 replies; 96+ messages in thread
From: Andrew Morton @ 2005-02-23 20:12 UTC (permalink / raw)
To: Helge Hafting; +Cc: linux-kernel
Helge Hafting <helge.hafting@aitel.hist.no> wrote:
>
> This kernel came up, but my boot script complained about no /dev/hdb3
> when trying to mount /var.
> (I have two IDE disks on the same cable, and an IDE cdrom on another.)
> They are usually hda, hdb, and hdc.
>
> MAKEDEV hdq did not help. Looking at sysfs, it turns out that
> /dev/hdq1 is at major:3 minor:1025 if I interpret things right.
> (/dev/hda1 is at 3:1, which is correct.)
> These numbers did not work with my mknod, it created 7:1 instead.
> So I didn't get to test this mysterious device.
>
> But I assume this is a mistake of some sort, I haven't heard about any
> change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
>
> It may be interesting to note that my root raid-1 came up fine,
> consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
I don't know what could be causing that. Please send .config. If you set
CONFIG_BASE_FULL=n, try setting it to `y'.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 20:12 ` Andrew Morton
@ 2005-02-23 22:36 ` Laurent Riffard
2005-02-23 23:11 ` Matt Mackall
` (2 more replies)
2005-02-23 23:32 ` Mathieu Segaud
1 sibling, 3 replies; 96+ messages in thread
From: Laurent Riffard @ 2005-02-23 22:36 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Helge Hafting
[-- Attachment #1.1: Type: text/plain, Size: 4451 bytes --]
Le 23.02.2005 21:12, Andrew Morton a écrit :
> Helge Hafting <helge.hafting@aitel.hist.no> wrote:
>
>>This kernel came up, but my boot script complained about no /dev/hdb3
>> when trying to mount /var.
>> (I have two IDE disks on the same cable, and an IDE cdrom on another.)
>> They are usually hda, hdb, and hdc.
>>
>> MAKEDEV hdq did not help. Looking at sysfs, it turns out that
>> /dev/hdq1 is at major:3 minor:1025 if I interpret things right.
>> (/dev/hda1 is at 3:1, which is correct.)
>> These numbers did not work with my mknod, it created 7:1 instead.
>> So I didn't get to test this mysterious device.
>>
>> But I assume this is a mistake of some sort, I haven't heard about any
>> change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
>>
>> It may be interesting to note that my root raid-1 came up fine,
>> consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
>
>
> I don't know what could be causing that. Please send .config. If you set
> CONFIG_BASE_FULL=n, try setting it to `y'.
>
this is just a "me too"...
Here is some few lines from dmesg :
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST340016A, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CD-950E/AKU, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-48125S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 > hda4
hdb: max request size: 128KiB
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(100)
hdb: cache flushes supported
hdq: hdq1 hdq2 < hdq5 hdq6 hdq7 hdq8 >
~$ ls -l /dev/hd*
brw-rw---- 1 root disk 3, 0 fév 23 22:45 /dev/hda
brw-rw---- 1 root disk 3, 1 fév 23 22:45 /dev/hda1
brw-rw---- 1 root disk 3, 10 fév 23 22:45 /dev/hda10
brw-rw---- 1 root disk 3, 2 fév 23 22:45 /dev/hda2
brw-rw---- 1 root disk 3, 3 fév 23 22:45 /dev/hda3
brw-rw---- 1 root disk 3, 4 fév 23 22:45 /dev/hda4
brw-rw---- 1 root disk 3, 5 fév 23 22:45 /dev/hda5
brw-rw---- 1 root disk 3, 6 fév 23 22:45 /dev/hda6
brw-rw---- 1 root disk 3, 7 fév 23 22:45 /dev/hda7
brw-rw---- 1 root disk 3, 8 fév 23 22:45 /dev/hda8
brw-rw---- 1 root disk 3, 9 fév 23 22:45 /dev/hda9
brw-rw---- 1 laurent cdrom 22, 0 fév 23 22:45 /dev/hdc
brw------- 1 root root 22, 64 fév 23 22:45 /dev/hdd
brw-rw---- 1 root disk 3, 1024 fév 23 22:45 /dev/hdq
brw-rw---- 1 root disk 3, 1025 fév 23 22:45 /dev/hdq1
brw-rw---- 1 root disk 3, 1026 fév 23 22:45 /dev/hdq2
brw-rw---- 1 root disk 3, 1029 fév 23 22:45 /dev/hdq5
brw-rw---- 1 root disk 3, 1030 fév 23 22:45 /dev/hdq6
brw-rw---- 1 root disk 3, 1031 fév 23 22:45 /dev/hdq7
brw-rw---- 1 root disk 3, 1032 fév 23 22:45 /dev/hdq8
brw-rw---- 1 root disk 22, 1024 fév 23 22:45 /dev/hds
/dev/hdq should be /dev/hdb.
hey, what's this /dev/hds ? digging into /sys/block...
~$ ls -l /sys/block/hds/device
lrwxrwxrwx 1 root root 0 fév 23 22:45 /sys/block/hds/device ->
../../devices/pci0000:00/0000:00:04.1/ide1/1.1/
/dev/hdq should be /dev/hdd...
~$ ls -l /proc/ide
total 4
-r--r--r-- 1 root root 0 fév 23 23:28 drivers
lrwxrwxrwx 1 root root 8 fév 23 23:28 hda -> ide0/hda/
lrwxrwxrwx 1 root root 8 fév 23 23:28 hdb -> ide0/hdb/
lrwxrwxrwx 1 root root 8 fév 23 23:28 hdc -> ide1/hdc/
lrwxrwxrwx 1 root root 8 fév 23 23:28 hdd -> ide1/hdd/
dr-xr-xr-x 4 root root 0 fév 23 23:28 ide0/
dr-xr-xr-x 4 root root 0 fév 23 23:28 ide1/
-r--r--r-- 1 root root 0 fév 23 23:28 via
~$ ls -d /sys/block/hd*
/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/
.config is attached
~~
laurent
[-- Attachment #1.2: config-2.6.11-rc4-mm1 --]
[-- Type: text/plain, Size: 38717 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4-mm1
# Wed Feb 23 21:30:41 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hdb6"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_PCC is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=m
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_NET_CLS_IND is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461X is not set
CONFIG_SOUND_GAMEPORT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# SuperIO subsystem support
#
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
#CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_RW_DETECT=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
# CONFIG_USB_ALI_M5632 is not set
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
# CONFIG_USB_GENESYS is not set
# CONFIG_USB_NET1080 is not set
# CONFIG_USB_PL2301 is not set
# CONFIG_USB_KC2190 is not set
#
# Intelligent USB Devices/Gadgets
#
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_ZAURUS is not set
CONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#
# CONFIG_USB_AX8817X is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=m
# CONFIG_REISER4_CHECK is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES_586=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 22:36 ` Laurent Riffard
@ 2005-02-23 23:11 ` Matt Mackall
2005-02-23 23:20 ` Andrew Morton
2005-02-23 23:47 ` Greg KH
2 siblings, 0 replies; 96+ messages in thread
From: Matt Mackall @ 2005-02-23 23:11 UTC (permalink / raw)
To: Laurent Riffard; +Cc: Andrew Morton, linux-kernel, Helge Hafting
On Wed, Feb 23, 2005 at 11:36:50PM +0100, Laurent Riffard wrote:
> Le 23.02.2005 21:12, Andrew Morton a ?crit :
> >Helge Hafting <helge.hafting@aitel.hist.no> wrote:
> >
> >>This kernel came up, but my boot script complained about no /dev/hdb3
> >>when trying to mount /var.
> >>(I have two IDE disks on the same cable, and an IDE cdrom on another.)
> >>They are usually hda, hdb, and hdc.
> >>
> >>MAKEDEV hdq did not help. Looking at sysfs, it turns out that
> >>/dev/hdq1 is at major:3 minor:1025 if I interpret things right.
> >>(/dev/hda1 is at 3:1, which is correct.)
> >>These numbers did not work with my mknod, it created 7:1 instead.
> >>So I didn't get to test this mysterious device.
> >>
> >>But I assume this is a mistake of some sort, I haven't heard about any
> >>change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
> >>
> >>It may be interesting to note that my root raid-1 came up fine,
> >>consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
> >
> >
> >I don't know what could be causing that. Please send .config. If you set
> >CONFIG_BASE_FULL=n, try setting it to `y'.
> >
>
> this is just a "me too"...
>
> Here is some few lines from dmesg :
>
> hdb: cache flushes supported
> hdq: hdq1 hdq2 < hdq5 hdq6 hdq7 hdq8 >
Neat.
> ~$ ls -l /dev/hd*
> brw-rw---- 1 root disk 3, 0 f?v 23 22:45 /dev/hda
> brw-rw---- 1 root disk 3, 1 f?v 23 22:45 /dev/hda1
> brw-rw---- 1 root disk 3, 10 f?v 23 22:45 /dev/hda10
> brw-rw---- 1 root disk 3, 2 f?v 23 22:45 /dev/hda2
> brw-rw---- 1 root disk 3, 3 f?v 23 22:45 /dev/hda3
> brw-rw---- 1 root disk 3, 4 f?v 23 22:45 /dev/hda4
> brw-rw---- 1 root disk 3, 5 f?v 23 22:45 /dev/hda5
> brw-rw---- 1 root disk 3, 6 f?v 23 22:45 /dev/hda6
> brw-rw---- 1 root disk 3, 7 f?v 23 22:45 /dev/hda7
> brw-rw---- 1 root disk 3, 8 f?v 23 22:45 /dev/hda8
> brw-rw---- 1 root disk 3, 9 f?v 23 22:45 /dev/hda9
> brw-rw---- 1 laurent cdrom 22, 0 f?v 23 22:45 /dev/hdc
> brw------- 1 root root 22, 64 f?v 23 22:45 /dev/hdd
> brw-rw---- 1 root disk 3, 1024 f?v 23 22:45 /dev/hdq
Looks like you're using udev.
> CONFIG_BASE_FULL=y
> CONFIG_BASE_SMALL=0
Ok, that's unrelated to the weird IDE numbering then.
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 22:36 ` Laurent Riffard
2005-02-23 23:11 ` Matt Mackall
@ 2005-02-23 23:20 ` Andrew Morton
2005-02-24 17:02 ` Laurent Riffard
2005-02-23 23:47 ` Greg KH
2 siblings, 1 reply; 96+ messages in thread
From: Andrew Morton @ 2005-02-23 23:20 UTC (permalink / raw)
To: Laurent Riffard; +Cc: linux-kernel, helge.hafting
Laurent Riffard <laurent.riffard@free.fr> wrote:
>
> Le 23.02.2005 21:12, Andrew Morton a écrit :
> > Helge Hafting <helge.hafting@aitel.hist.no> wrote:
> >
> >>This kernel came up, but my boot script complained about no /dev/hdb3
> >> when trying to mount /var.
> >> (I have two IDE disks on the same cable, and an IDE cdrom on another.)
> >> They are usually hda, hdb, and hdc.
> >>
> >> MAKEDEV hdq did not help. Looking at sysfs, it turns out that
> >> /dev/hdq1 is at major:3 minor:1025 if I interpret things right.
> >> (/dev/hda1 is at 3:1, which is correct.)
> >> These numbers did not work with my mknod, it created 7:1 instead.
> >> So I didn't get to test this mysterious device.
> >>
> >> But I assume this is a mistake of some sort, I haven't heard about any
> >> change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
> >>
> >> It may be interesting to note that my root raid-1 came up fine,
> >> consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
> >
> >
> > I don't know what could be causing that. Please send .config. If you set
> > CONFIG_BASE_FULL=n, try setting it to `y'.
> >
>
> this is just a "me too"...
Confusing. Are you saying that the hdd->hdq problem is happening even with
CONFIG_BASE_FULL=y?
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 23:20 ` Andrew Morton
@ 2005-02-24 17:02 ` Laurent Riffard
0 siblings, 0 replies; 96+ messages in thread
From: Laurent Riffard @ 2005-02-24 17:02 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, helge.hafting
[-- Attachment #1: Type: text/plain, Size: 1334 bytes --]
Le 24.02.2005 00:20, Andrew Morton a écrit :
> Laurent Riffard <laurent.riffard@free.fr> wrote:
>
>>Le 23.02.2005 21:12, Andrew Morton a écrit :
>>
>>>Helge Hafting <helge.hafting@aitel.hist.no> wrote:
>>>
>>>
>>>>This kernel came up, but my boot script complained about no /dev/hdb3
>>>>when trying to mount /var.
>>>>(I have two IDE disks on the same cable, and an IDE cdrom on another.)
>>>>They are usually hda, hdb, and hdc.
>>>>
>>>>MAKEDEV hdq did not help. Looking at sysfs, it turns out that
>>>>/dev/hdq1 is at major:3 minor:1025 if I interpret things right.
>>>>(/dev/hda1 is at 3:1, which is correct.)
>>>>These numbers did not work with my mknod, it created 7:1 instead.
>>>>So I didn't get to test this mysterious device.
>>>>
>>>>But I assume this is a mistake of some sort, I haven't heard about any
>>>>change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
>>>>
>>>>It may be interesting to note that my root raid-1 came up fine,
>>>>consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
>>>
>>>
>>>I don't know what could be causing that. Please send .config. If you set
>>>CONFIG_BASE_FULL=n, try setting it to `y'.
>>>
>>
>>this is just a "me too"...
>
>
> Confusing. Are you saying that the hdd->hdq problem is happening even with
> CONFIG_BASE_FULL=y?
>
yes, I do.
--
laurent
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 22:36 ` Laurent Riffard
2005-02-23 23:11 ` Matt Mackall
2005-02-23 23:20 ` Andrew Morton
@ 2005-02-23 23:47 ` Greg KH
2005-02-24 17:06 ` Laurent Riffard
2 siblings, 1 reply; 96+ messages in thread
From: Greg KH @ 2005-02-23 23:47 UTC (permalink / raw)
To: Laurent Riffard; +Cc: Andrew Morton, linux-kernel, Helge Hafting
On Wed, Feb 23, 2005 at 11:36:50PM +0100, Laurent Riffard wrote:
> hey, what's this /dev/hds ? digging into /sys/block...
>
> ~$ ls -l /sys/block/hds/device
> lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device ->
> ../../devices/pci0000:00/0000:00:04.1/ide1/1.1/
>
> /dev/hdq should be /dev/hdd...
>
> ~$ ls -l /proc/ide
> total 4
> -r--r--r-- 1 root root 0 f?v 23 23:28 drivers
> lrwxrwxrwx 1 root root 8 f?v 23 23:28 hda -> ide0/hda/
> lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
> lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
> lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
> dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide0/
> dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide1/
> -r--r--r-- 1 root root 0 f?v 23 23:28 via
> ~$ ls -d /sys/block/hd*
> /sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/
What does /proc/devices show?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 23:47 ` Greg KH
@ 2005-02-24 17:06 ` Laurent Riffard
2005-02-24 17:18 ` Greg KH
0 siblings, 1 reply; 96+ messages in thread
From: Laurent Riffard @ 2005-02-24 17:06 UTC (permalink / raw)
To: Greg KH; +Cc: Andrew Morton, linux-kernel, Helge Hafting
[-- Attachment #1: Type: text/plain, Size: 1291 bytes --]
Le 24.02.2005 00:47, Greg KH a écrit :
> On Wed, Feb 23, 2005 at 11:36:50PM +0100, Laurent Riffard wrote:
>
>>hey, what's this /dev/hds ? digging into /sys/block...
>>
>>~$ ls -l /sys/block/hds/device
>>lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device ->
>>../../devices/pci0000:00/0000:00:04.1/ide1/1.1/
>>
>>/dev/hdq should be /dev/hdd...
>>
>>~$ ls -l /proc/ide
>>total 4
>>-r--r--r-- 1 root root 0 f?v 23 23:28 drivers
>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hda -> ide0/hda/
>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
>>dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide0/
>>dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide1/
>>-r--r--r-- 1 root root 0 f?v 23 23:28 via
>>~$ ls -d /sys/block/hd*
>>/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/
>
>
> What does /proc/devices show?
Character devices:
1 mem
4 /dev/vc/0
4 tty
5 /dev/tty
5 /dev/console
5 /dev/ptmx
6 lp
7 vcs
10 misc
13 input
14 sound
29 fb
116 alsa
128 ptm
136 pts
171 ieee1394
180 usb
Block devices:
1 ramdisk
2 fd
3 ide0
7 loop
22 ide1
253 pktcdvd
254 device-mapper
Do you see something strange here ?
--
laurent
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-24 17:06 ` Laurent Riffard
@ 2005-02-24 17:18 ` Greg KH
2005-02-24 20:42 ` Laurent Riffard
0 siblings, 1 reply; 96+ messages in thread
From: Greg KH @ 2005-02-24 17:18 UTC (permalink / raw)
To: Laurent Riffard; +Cc: Andrew Morton, linux-kernel, Helge Hafting
On Thu, Feb 24, 2005 at 06:06:39PM +0100, Laurent Riffard wrote:
>
>
> Le 24.02.2005 00:47, Greg KH a ?crit :
> >On Wed, Feb 23, 2005 at 11:36:50PM +0100, Laurent Riffard wrote:
> >
> >>hey, what's this /dev/hds ? digging into /sys/block...
> >>
> >>~$ ls -l /sys/block/hds/device
> >>lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device ->
> >>../../devices/pci0000:00/0000:00:04.1/ide1/1.1/
> >>
> >>/dev/hdq should be /dev/hdd...
> >>
> >>~$ ls -l /proc/ide
> >>total 4
> >>-r--r--r-- 1 root root 0 f?v 23 23:28 drivers
> >>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hda -> ide0/hda/
> >>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
> >>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
> >>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
> >>dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide0/
> >>dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide1/
> >>-r--r--r-- 1 root root 0 f?v 23 23:28 via
> >>~$ ls -d /sys/block/hd*
> >>/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/
> >
> >
> >What does /proc/devices show?
>
> Character devices:
> 1 mem
> 4 /dev/vc/0
> 4 tty
> 5 /dev/tty
> 5 /dev/console
> 5 /dev/ptmx
> 6 lp
> 7 vcs
> 10 misc
> 13 input
> 14 sound
> 29 fb
> 116 alsa
> 128 ptm
> 136 pts
> 171 ieee1394
> 180 usb
>
> Block devices:
> 1 ramdisk
> 2 fd
> 3 ide0
> 7 loop
> 22 ide1
> 253 pktcdvd
> 254 device-mapper
>
> Do you see something strange here ?
No, ide0 is 3 and ide1 is 22, which is "standard". Hm, what's that
pktcdvd and device-mapper doing there? Do you need those drivers? Can
you try it without building them and see if that helps?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-24 17:18 ` Greg KH
@ 2005-02-24 20:42 ` Laurent Riffard
2005-02-24 23:17 ` Greg KH
0 siblings, 1 reply; 96+ messages in thread
From: Laurent Riffard @ 2005-02-24 20:42 UTC (permalink / raw)
To: Greg KH; +Cc: Andrew Morton, linux-kernel, Helge Hafting
[-- Attachment #1: Type: text/plain, Size: 2056 bytes --]
Le 24.02.2005 18:18, Greg KH a écrit :
> On Thu, Feb 24, 2005 at 06:06:39PM +0100, Laurent Riffard wrote:
>
>>
>>Le 24.02.2005 00:47, Greg KH a ?crit :
>>
>>>On Wed, Feb 23, 2005 at 11:36:50PM +0100, Laurent Riffard wrote:
>>>
>>>
>>>>hey, what's this /dev/hds ? digging into /sys/block...
>>>>
>>>>~$ ls -l /sys/block/hds/device
>>>>lrwxrwxrwx 1 root root 0 f?v 23 22:45 /sys/block/hds/device ->
>>>>../../devices/pci0000:00/0000:00:04.1/ide1/1.1/
>>>>
>>>>/dev/hdq should be /dev/hdd...
>>>>
>>>>~$ ls -l /proc/ide
>>>>total 4
>>>>-r--r--r-- 1 root root 0 f?v 23 23:28 drivers
>>>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hda -> ide0/hda/
>>>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdb -> ide0/hdb/
>>>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdc -> ide1/hdc/
>>>>lrwxrwxrwx 1 root root 8 f?v 23 23:28 hdd -> ide1/hdd/
>>>>dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide0/
>>>>dr-xr-xr-x 4 root root 0 f?v 23 23:28 ide1/
>>>>-r--r--r-- 1 root root 0 f?v 23 23:28 via
>>>>~$ ls -d /sys/block/hd*
>>>>/sys/block/hda/ /sys/block/hdc/ /sys/block/hdq/ /sys/block/hds/
>>>
>>>
>>>What does /proc/devices show?
>>
>>Character devices:
>> 1 mem
>> 4 /dev/vc/0
>> 4 tty
>> 5 /dev/tty
>> 5 /dev/console
>> 5 /dev/ptmx
>> 6 lp
>> 7 vcs
>> 10 misc
>> 13 input
>> 14 sound
>> 29 fb
>>116 alsa
>>128 ptm
>>136 pts
>>171 ieee1394
>>180 usb
>>
>>Block devices:
>> 1 ramdisk
>> 2 fd
>> 3 ide0
>> 7 loop
>> 22 ide1
>>253 pktcdvd
>>254 device-mapper
>>
>>Do you see something strange here ?
>
>
> No, ide0 is 3 and ide1 is 22, which is "standard". Hm, what's that
> pktcdvd and device-mapper doing there? Do you need those drivers? Can
> you try it without building them and see if that helps?
I do need device-mapper, since I put /usr and /var on LVM filesystems. I
use ptkcdvd to copy data to CD-RW. I can remove this one.
Anyway, this patch from Andrew fixed the problem :
http://lkml.org/lkml/2005/2/23/214.
So I won't try to remove pktcdvd and device-mapper driver (except if you
_really_ want me to do so).
Thanks for your interest.
--
laurent
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 252 bytes --]
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-24 20:42 ` Laurent Riffard
@ 2005-02-24 23:17 ` Greg KH
0 siblings, 0 replies; 96+ messages in thread
From: Greg KH @ 2005-02-24 23:17 UTC (permalink / raw)
To: Laurent Riffard; +Cc: Andrew Morton, linux-kernel, Helge Hafting
On Thu, Feb 24, 2005 at 09:42:24PM +0100, Laurent Riffard wrote:
> I do need device-mapper, since I put /usr and /var on LVM filesystems. I
> use ptkcdvd to copy data to CD-RW. I can remove this one.
>
> Anyway, this patch from Andrew fixed the problem :
> http://lkml.org/lkml/2005/2/23/214.
Yeah, it's not in my code! :)
> So I won't try to remove pktcdvd and device-mapper driver (except if you
> _really_ want me to do so).
Nope, as long as the above patch works for you, I'm happy.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 20:12 ` Andrew Morton
2005-02-23 22:36 ` Laurent Riffard
@ 2005-02-23 23:32 ` Mathieu Segaud
2005-02-24 0:17 ` Matt Mackall
1 sibling, 1 reply; 96+ messages in thread
From: Mathieu Segaud @ 2005-02-23 23:32 UTC (permalink / raw)
To: Andrew Morton; +Cc: Helge Hafting, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1278 bytes --]
Andrew Morton <akpm@osdl.org> disait dernièrement que :
> Helge Hafting <helge.hafting@aitel.hist.no> wrote:
>>
>> This kernel came up, but my boot script complained about no /dev/hdb3
>> when trying to mount /var.
>> (I have two IDE disks on the same cable, and an IDE cdrom on another.)
>> They are usually hda, hdb, and hdc.
>>
>> MAKEDEV hdq did not help. Looking at sysfs, it turns out that
>> /dev/hdq1 is at major:3 minor:1025 if I interpret things right.
>> (/dev/hda1 is at 3:1, which is correct.)
>> These numbers did not work with my mknod, it created 7:1 instead.
>> So I didn't get to test this mysterious device.
>>
>> But I assume this is a mistake of some sort, I haven't heard about any
>> change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
>>
>> It may be interesting to note that my root raid-1 came up fine,
>> consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
>
> I don't know what could be causing that. Please send .config. If you set
> CONFIG_BASE_FULL=n, try setting it to `y'.
I've got the same problem here on my box, udev creates hds and hdu
entries when running 2.6.11-rc4-mm1, whereas it creates correctly hdf
et hdh, on other kernels.
here follows .config:
[-- Attachment #2: Type: text/plain, Size: 35640 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4-mm1
# Wed Feb 23 22:11:44 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_PCC=m
CONFIG_ACPI_SONY=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_NET_CLS_IND is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_WEP=m
CONFIG_HOSTAP_TKIP=m
CONFIG_HOSTAP_CCMP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# SuperIO subsystem support
#
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set
#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_DIBUSB is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_SKYSTAR is not set
# CONFIG_DVB_B2C2_USB is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_CX24110=m
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA80XX is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
CONFIG_DVB_SP887X=m
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_ATMEL_AT76C651 is not set
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terresterial DTV) frontends
#
# CONFIG_DVB_NXT2002 is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
CONFIG_USB_STORAGE_DATAFAB=y
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISER4_FS=y
# CONFIG_REISER4_CHECK is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_SECURITY is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
[-- Attachment #3: Type: text/plain, Size: 354 bytes --]
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
--
Carrots work on rabbits, they don't work on hungry weasels.
- Alan Cox on linux-kernel
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ?
2005-02-23 23:32 ` Mathieu Segaud
@ 2005-02-24 0:17 ` Matt Mackall
0 siblings, 0 replies; 96+ messages in thread
From: Matt Mackall @ 2005-02-24 0:17 UTC (permalink / raw)
To: Mathieu Segaud; +Cc: Andrew Morton, Helge Hafting, linux-kernel
On Thu, Feb 24, 2005 at 12:32:59AM +0100, Mathieu Segaud wrote:
> Andrew Morton <akpm@osdl.org> disait derni??rement que :
>
> > Helge Hafting <helge.hafting@aitel.hist.no> wrote:
> >>
> >> This kernel came up, but my boot script complained about no /dev/hdb3
> >> when trying to mount /var.
> >> (I have two IDE disks on the same cable, and an IDE cdrom on another.)
> >> They are usually hda, hdb, and hdc.
> >>
> >> MAKEDEV hdq did not help. Looking at sysfs, it turns out that
> >> /dev/hdq1 is at major:3 minor:1025 if I interpret things right.
> >> (/dev/hda1 is at 3:1, which is correct.)
> >> These numbers did not work with my mknod, it created 7:1 instead.
> >> So I didn't get to test this mysterious device.
> >>
> >> But I assume this is a mistake of some sort, I haven't heard about any
> >> change in the IDE numbering coming up? 2.6.1-rc3-mm1 works as expected.
> >>
> >> It may be interesting to note that my root raid-1 came up fine,
> >> consisting of hdq1 and hda1 instead of the usual hdb1 and hda1.
> >
> > I don't know what could be causing that. Please send .config. If you set
> > CONFIG_BASE_FULL=n, try setting it to `y'.
>
> I've got the same problem here on my box, udev creates hds and hdu
> entries when running 2.6.11-rc4-mm1, whereas it creates correctly hdf
> et hdh, on other kernels.
Are these misnamed and misnumbered devices mountable? If not, can you
mknod device nodes at the proper major:minor location and have them
work?
Seems ->disk_name is getting modified between ide_setup() and
add_disk() somehow, giving us:
hdb: ...
hdq: hdq1 hdq2...
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
2005-02-23 11:03 ` 2.6.11-rc4-mm1 Mathieu Segaud
2005-02-23 13:06 ` 2.6.11-rc4-mm1 : IDE crazy numbers, hdb renumbered to hdq ? Helge Hafting
@ 2005-02-23 16:37 ` Steven Cole
2005-02-23 20:17 ` Andrew Morton
2005-02-23 22:45 ` Matt Mackall
2005-02-23 17:07 ` 2.6.11-rc4-mm1 Vincent Vanackere
` (13 subsequent siblings)
16 siblings, 2 replies; 96+ messages in thread
From: Steven Cole @ 2005-02-23 16:37 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
>
>
> - Various fixes and updates all over the place. Things seem to have slowed
> down a bit.
>
I am having trouble getting recent -mm kernels to boot on my test box.
For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
VFS: Cannot open root device "301" or unknown-block(3,1)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
2.6.11-rc2-mm1 boots fine, and so do plain -rc3 and -rc4.
I copied a working .config from an earlier kernel(-rc3), and ran make oldconfig,
answering most of the new questions 'n'.
I did try appending root=0301 (which worked last year after similar symptoms,
but that didn't help this time).
The root fs is ext3, which is compiled in.
Any help appreciated.
Steven
Output of grep ^CONFIG .config:
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCALVERSION="-GX110"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_BASE_SMALL=1
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_X86_PC=y
CONFIG_MPENTIUMIII=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_EDD=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_XFRM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_FTAPE=y
CONFIG_ZFTAPE=y
CONFIG_ZFT_DFLT_BLK_SZ=10240
CONFIG_ZFT_COMPRESSOR=y
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
CONFIG_FT_STD_FDC=y
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_SELECT=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
CONFIG_REISERFS_FS=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_FRAME_POINTER=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 16:37 ` 2.6.11-rc4-mm1 (VFS: Cannot open root device "301") Steven Cole
@ 2005-02-23 20:17 ` Andrew Morton
2005-02-23 22:10 ` Steven Cole
2005-02-23 22:45 ` Matt Mackall
1 sibling, 1 reply; 96+ messages in thread
From: Andrew Morton @ 2005-02-23 20:17 UTC (permalink / raw)
To: Steven Cole; +Cc: linux-kernel
Steven Cole <elenstev@mesatop.com> wrote:
>
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
> >
> >
> > - Various fixes and updates all over the place. Things seem to have slowed
> > down a bit.
> >
>
> I am having trouble getting recent -mm kernels to boot on my test box.
> For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
>
> VFS: Cannot open root device "301" or unknown-block(3,1)
> Please append a correct "root=" boot option
> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
>
> 2.6.11-rc2-mm1 boots fine, and so do plain -rc3 and -rc4.
>
> I copied a working .config from an earlier kernel(-rc3), and ran make oldconfig,
> answering most of the new questions 'n'.
>
> I did try appending root=0301 (which worked last year after similar symptoms,
> but that didn't help this time).
>
> The root fs is ext3, which is compiled in.
> ...
> CONFIG_BASE_SMALL=1
Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0,
then retest.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 20:17 ` Andrew Morton
@ 2005-02-23 22:10 ` Steven Cole
2005-02-23 22:54 ` Steven Cole
` (2 more replies)
0 siblings, 3 replies; 96+ messages in thread
From: Steven Cole @ 2005-02-23 22:10 UTC (permalink / raw)
To: Andrew Morton; +Cc: Steven Cole, linux-kernel
Andrew Morton wrote:
> Steven Cole <elenstev@mesatop.com> wrote:
>> I am having trouble getting recent -mm kernels to boot on my test box.
>> For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
>>
>> VFS: Cannot open root device "301" or unknown-block(3,1)
>> Please append a correct "root=" boot option
>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
>>
[snipped]
>
> Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0,
> then retest.
Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.
[root@spc1 steven]# uname -r
2.6.11-rc4-mm1-GX110
[root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
mount: special device /dev/hdb1 does not exist
Reading another post (and looking in /dev), I tried hdq:
[root@spc1 steven]# mount -t reiser4 /dev/hdq1 /reiser4_testing
[root@spc1 steven]# df -T
Filesystem Type Size Used Avail Use% Mounted on
/dev/hda1 ext3 304M 75M 214M 26% /
/dev/hda9 reiserfs 8.3G 3.9G 4.4G 48% /home
/dev/hda8 ext3 464M 8.1M 432M 2% /tmp
/dev/hda6 ext3 7.4G 1.7G 5.4G 24% /usr
/dev/hda7 ext3 1.9G 86M 1.7G 5% /var
/dev/hdq1 reiser4 18G 217M 18G 2% /reiser4_testing
Snipped from dmesg:
hda: ST320423A, ATA DISK drive
hdb: WDC WD200BB-75AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
hdb: cache flushes not supported
/dev/ide/host0/bus0/target1/lun0: p1
Steven
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 22:10 ` Steven Cole
@ 2005-02-23 22:54 ` Steven Cole
2005-02-24 0:16 ` Andrew Morton
2005-02-23 23:03 ` Andrew Morton
2005-02-24 0:44 ` Matt Mackall
2 siblings, 1 reply; 96+ messages in thread
From: Steven Cole @ 2005-02-23 22:54 UTC (permalink / raw)
To: Steven Cole; +Cc: Andrew Morton, linux-kernel
Steven Cole wrote:
> Andrew Morton wrote:
>
>> Steven Cole <elenstev@mesatop.com> wrote:
>
>
>>> I am having trouble getting recent -mm kernels to boot on my test box.
>>> For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
>>>
>>> VFS: Cannot open root device "301" or unknown-block(3,1)
>>> Please append a correct "root=" boot option
>>> Kernel panic - not syncing: VFS: Unable to mount root fs on
>>> unknown-block(3,1)
>>>
> [snipped]
>
>>
>> Please set CONFIG_BASE_FULL=y. Check that this causes
>> CONFIG_BASE_SMALL=0,
>> then retest.
>
>
> Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
> missing.
>
> [root@spc1 steven]# uname -r
> 2.6.11-rc4-mm1-GX110
> [root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
> mount: special device /dev/hdb1 does not exist
>
> Reading another post (and looking in /dev), I tried hdq:
>
> [root@spc1 steven]# mount -t reiser4 /dev/hdq1 /reiser4_testing
> [root@spc1 steven]# df -T
> Filesystem Type Size Used Avail Use% Mounted on
> /dev/hda1 ext3 304M 75M 214M 26% /
> /dev/hda9 reiserfs 8.3G 3.9G 4.4G 48% /home
> /dev/hda8 ext3 464M 8.1M 432M 2% /tmp
> /dev/hda6 ext3 7.4G 1.7G 5.4G 24% /usr
> /dev/hda7 ext3 1.9G 86M 1.7G 5% /var
> /dev/hdq1 reiser4 18G 217M 18G 2% /reiser4_testing
>
> Snipped from dmesg:
>
> hda: ST320423A, ATA DISK drive
> hdb: WDC WD200BB-75AUA1, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> Probing IDE interface ide2...
> Probing IDE interface ide3...
> Probing IDE interface ide4...
> Probing IDE interface ide5...
> hda: max request size: 128KiB
> hda: 40011300 sectors (20485 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(66)
> hda: cache flushes not supported
> /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
> hdb: max request size: 128KiB
> hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
> hdb: cache flushes not supported
> /dev/ide/host0/bus0/target1/lun0: p1
>
>
> Steven
(Replying to myself)
I decided to fix 2.6.11-rc3-mm1 with CONFIG_BASE_FULL=y and see if
the hdb/hdq confusion existed with that earlier kernel, but when I
ran lilo, I got a "Fatal: cache_add: LILO internal error" message.
[root@spc1 steven]# /sbin/lilo -v
LILO version 22.6.1, Copyright (C) 1992-1998 Werner Almesberger
Development beyond version 21 Copyright (C) 1999-2004 John Coffman
Released 17-Nov-2004, and compiled at 20:03:17 on Jan 15 2005
Reading boot sector from /dev/hda
Fatal: cache_add: LILO internal error
This box is still running 2.6.11-rc4-mm1 from above, and was booted
with append="root=0301" accidentally left in lilo.conf from earlier testing.
Steven
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 22:54 ` Steven Cole
@ 2005-02-24 0:16 ` Andrew Morton
2005-02-24 0:25 ` Andrew Morton
2005-02-24 0:41 ` Matt Mackall
0 siblings, 2 replies; 96+ messages in thread
From: Andrew Morton @ 2005-02-24 0:16 UTC (permalink / raw)
To: Steven Cole; +Cc: elenstev, linux-kernel, Bartlomiej Zolnierkiewicz
Steven Cole <elenstev@mesatop.com> wrote:
>
> > Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
> > missing.
Looking at the IDE update in rc4-mm1:
+void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ unsigned int unit = drive->select.all & (1 << 4);
+
+ disk->major = hwif->major;
+ disk->first_minor = unit << PARTN_BITS;
+ sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
+ disk->queue = drive->queue;
+}
Looks funny.
Could someone try this?
- unsigned int unit = drive->select.all & (1 << 4);
+ unsigned int unit = (drive->select.all >> 4) & 1;
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 0:16 ` Andrew Morton
@ 2005-02-24 0:25 ` Andrew Morton
2005-02-24 13:19 ` Bartlomiej Zolnierkiewicz
2005-02-25 0:20 ` Felipe Alfaro Solana
2005-02-24 0:41 ` Matt Mackall
1 sibling, 2 replies; 96+ messages in thread
From: Andrew Morton @ 2005-02-24 0:25 UTC (permalink / raw)
To: elenstev, linux-kernel, B.Zolnierkiewicz
Andrew Morton <akpm@osdl.org> wrote:
>
> Could someone try this?
Let's turn that into a real patch.
--- 25/drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005
+++ 25-akpm/drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- unsigned int unit = drive->select.all & (1 << 4);
+ unsigned int unit = (drive->select.all >> 4) & 1;
disk->major = hwif->major;
disk->first_minor = unit << PARTN_BITS;
_
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 0:25 ` Andrew Morton
@ 2005-02-24 13:19 ` Bartlomiej Zolnierkiewicz
2005-02-25 0:20 ` Felipe Alfaro Solana
1 sibling, 0 replies; 96+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2005-02-24 13:19 UTC (permalink / raw)
To: Andrew Morton; +Cc: elenstev, linux-kernel
On Wed, 23 Feb 2005 16:25:39 -0800, Andrew Morton <akpm@osdl.org> wrote:
> Andrew Morton <akpm@osdl.org> wrote:
> >
> > Could someone try this?
>
> Let's turn that into a real patch.
>
> --- 25/drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005
> +++ 25-akpm/drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005
> @@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
> void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
> {
> ide_hwif_t *hwif = drive->hwif;
> - unsigned int unit = drive->select.all & (1 << 4);
> + unsigned int unit = (drive->select.all >> 4) & 1;
>
> disk->major = hwif->major;
> disk->first_minor = unit << PARTN_BITS;
thanks Andrew
fscking bitfields hopefully viro will kill them soon
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 0:25 ` Andrew Morton
2005-02-24 13:19 ` Bartlomiej Zolnierkiewicz
@ 2005-02-25 0:20 ` Felipe Alfaro Solana
1 sibling, 0 replies; 96+ messages in thread
From: Felipe Alfaro Solana @ 2005-02-25 0:20 UTC (permalink / raw)
To: Andrew Morton; +Cc: elenstev, linux-kernel, B.Zolnierkiewicz
On Wed, 23 Feb 2005 16:25:39 -0800, Andrew Morton <akpm@osdl.org> wrote:
> Andrew Morton <akpm@osdl.org> wrote:
> >
> > Could someone try this?
>
> Let's turn that into a real patch.
>
> --- 25/drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005
> +++ 25-akpm/drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005
> @@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
> void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
> {
> ide_hwif_t *hwif = drive->hwif;
> - unsigned int unit = drive->select.all & (1 << 4);
> + unsigned int unit = (drive->select.all >> 4) & 1;
>
> disk->major = hwif->major;
> disk->first_minor = unit << PARTN_BITS;
> _
>
> -
Works for me.
Thanks.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 0:16 ` Andrew Morton
2005-02-24 0:25 ` Andrew Morton
@ 2005-02-24 0:41 ` Matt Mackall
2005-02-24 2:03 ` Benoit Boissinot
1 sibling, 1 reply; 96+ messages in thread
From: Matt Mackall @ 2005-02-24 0:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: Steven Cole, linux-kernel, Bartlomiej Zolnierkiewicz
On Wed, Feb 23, 2005 at 04:16:53PM -0800, Andrew Morton wrote:
> Steven Cole <elenstev@mesatop.com> wrote:
> >
> > > Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
> > > missing.
>
> Looking at the IDE update in rc4-mm1:
>
> +void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
> +{
> + ide_hwif_t *hwif = drive->hwif;
> + unsigned int unit = drive->select.all & (1 << 4);
> +
> + disk->major = hwif->major;
> + disk->first_minor = unit << PARTN_BITS;
> + sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
> + disk->queue = drive->queue;
> +}
>
> Looks funny.
>
> Could someone try this?
>
> - unsigned int unit = drive->select.all & (1 << 4);
> + unsigned int unit = (drive->select.all >> 4) & 1;
Apparently there's already an 'hdb' sitting in drive->name, perhaps we
ought to do disk->disk_name = drive->name for the non-devfs case.
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 0:41 ` Matt Mackall
@ 2005-02-24 2:03 ` Benoit Boissinot
2005-02-24 2:08 ` Matt Mackall
0 siblings, 1 reply; 96+ messages in thread
From: Benoit Boissinot @ 2005-02-24 2:03 UTC (permalink / raw)
To: Matt Mackall
Cc: Andrew Morton, Steven Cole, linux-kernel,
Bartlomiej Zolnierkiewicz
[-- Attachment #1: Type: text/plain, Size: 1108 bytes --]
On Wed, 23 Feb 2005 16:41:59 -0800, Matt Mackall <mpm@selenic.com> wrote:
> On Wed, Feb 23, 2005 at 04:16:53PM -0800, Andrew Morton wrote:
> > Steven Cole <elenstev@mesatop.com> wrote:
> > >
> > > > Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
> > > > missing.
> >
> > Looking at the IDE update in rc4-mm1:
> >
> > +void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
> > +{
> > + ide_hwif_t *hwif = drive->hwif;
> > + unsigned int unit = drive->select.all & (1 << 4);
> > +
If i grep in the tree, for select.all, it looks like from the initialization
that you can not recover the unit from select.all (ide.c line 235 and 1882)
since the function used is not invertible.
> >
> > Could someone try this?
> >
> > - unsigned int unit = drive->select.all & (1 << 4);
> > + unsigned int unit = (drive->select.all >> 4) & 1;
>
> Apparently there's already an 'hdb' sitting in drive->name, perhaps we
> ought to do disk->disk_name = drive->name for the non-devfs case.
>
init_hwif_default initialized it right.
Could something like this work ?
regards,
Benoit
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: ide-patch.diff --]
[-- Type: text/x-patch; name="ide-patch.diff", Size: 664 bytes --]
--- linux/drivers/ide/ide-probe.c 2005-02-23 12:16:32.000000000 +0100
+++ linux-test/drivers/ide/ide-probe.c 2005-02-24 03:02:06.000000000 +0100
@@ -1269,11 +1269,11 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- unsigned int unit = drive->select.all & (1 << 4);
+ unsigned int unit = drive->name[2] - 'a' - hwif->index * MAX_DRIVES;
disk->major = hwif->major;
disk->first_minor = unit << PARTN_BITS;
- sprintf(disk->disk_name, "hd%c", 'a' + hwif->index * MAX_DRIVES + unit);
+ disk->disk_name = drive->name;
disk->queue = drive->queue;
}
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 2:03 ` Benoit Boissinot
@ 2005-02-24 2:08 ` Matt Mackall
0 siblings, 0 replies; 96+ messages in thread
From: Matt Mackall @ 2005-02-24 2:08 UTC (permalink / raw)
To: Benoit Boissinot
Cc: Andrew Morton, Steven Cole, linux-kernel,
Bartlomiej Zolnierkiewicz
On Thu, Feb 24, 2005 at 03:03:33AM +0100, Benoit Boissinot wrote:
> On Wed, 23 Feb 2005 16:41:59 -0800, Matt Mackall <mpm@selenic.com> wrote:
> > On Wed, Feb 23, 2005 at 04:16:53PM -0800, Andrew Morton wrote:
> > > Steven Cole <elenstev@mesatop.com> wrote:
> > > >
> > > > > Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
> > > > > missing.
> > >
> > > Looking at the IDE update in rc4-mm1:
> > >
> > > +void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
> > > +{
> > > + ide_hwif_t *hwif = drive->hwif;
> > > + unsigned int unit = drive->select.all & (1 << 4);
> > > +
>
> If i grep in the tree, for select.all, it looks like from the initialization
> that you can not recover the unit from select.all (ide.c line 235 and 1882)
> since the function used is not invertible.
They're fine, if a bit ugly. Unit is either 0 or 1. So:
(unit<<4) | 0xa0
is equivalent to unit * 16 as the mask won't mask off any bits.
> > >
> > > Could someone try this?
> > >
> > > - unsigned int unit = drive->select.all & (1 << 4);
> > > + unsigned int unit = (drive->select.all >> 4) & 1;
> >
> > Apparently there's already an 'hdb' sitting in drive->name, perhaps we
> > ought to do disk->disk_name = drive->name for the non-devfs case.
> >
> init_hwif_default initialized it right.
>
> Could something like this work ?
No, because they're arrays and not pointers. I've booted with the
obvious strcpy, works fine.
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 22:10 ` Steven Cole
2005-02-23 22:54 ` Steven Cole
@ 2005-02-23 23:03 ` Andrew Morton
2005-02-23 23:03 ` Matt Mackall
2005-02-24 0:44 ` Matt Mackall
2 siblings, 1 reply; 96+ messages in thread
From: Andrew Morton @ 2005-02-23 23:03 UTC (permalink / raw)
To: Steven Cole; +Cc: elenstev, linux-kernel, Matt Mackall
Steven Cole <elenstev@mesatop.com> wrote:
>
> Andrew Morton wrote:
> > Steven Cole <elenstev@mesatop.com> wrote:
>
> >> I am having trouble getting recent -mm kernels to boot on my test box.
> >> For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
> >>
> >> VFS: Cannot open root device "301" or unknown-block(3,1)
> >> Please append a correct "root=" boot option
> >> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
> >>
> [snipped]
> >
> > Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0,
> > then retest.
>
> Yes, that worked.
hmm, OK. Matt, we have a block major enumeration problem. It appears that
base-small-shrink-chrdevs-hash.patch has the same problem which
base-small-shrink-major_names-hash.patch had.
> 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.
>
> [root@spc1 steven]# uname -r
> 2.6.11-rc4-mm1-GX110
> [root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
> mount: special device /dev/hdb1 does not exist
It would seem that your /dev/hdb1 block-special device node isn't present.
Try `mknod /dev/hdb1 3 65'.
> hdb: max request size: 128KiB
> hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(66)
> hdb: cache flushes not supported
> /dev/ide/host0/bus0/target1/lun0: p1
We found a partition.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 23:03 ` Andrew Morton
@ 2005-02-23 23:03 ` Matt Mackall
0 siblings, 0 replies; 96+ messages in thread
From: Matt Mackall @ 2005-02-23 23:03 UTC (permalink / raw)
To: Andrew Morton; +Cc: Steven Cole, linux-kernel
On Wed, Feb 23, 2005 at 03:03:33PM -0800, Andrew Morton wrote:
> Steven Cole <elenstev@mesatop.com> wrote:
> >
> > Andrew Morton wrote:
> > > Steven Cole <elenstev@mesatop.com> wrote:
> >
> > >> I am having trouble getting recent -mm kernels to boot on my test box.
> > >> For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
> > >>
> > >> VFS: Cannot open root device "301" or unknown-block(3,1)
> > >> Please append a correct "root=" boot option
> > >> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(3,1)
> > >>
> > [snipped]
> > >
> > > Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0,
> > > then retest.
> >
> > Yes, that worked.
>
> hmm, OK. Matt, we have a block major enumeration problem. It appears that
> base-small-shrink-chrdevs-hash.patch has the same problem which
> base-small-shrink-major_names-hash.patch had.
Hard to see how that could happen.
> > 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be missing.
> >
> > [root@spc1 steven]# uname -r
> > 2.6.11-rc4-mm1-GX110
> > [root@spc1 steven]# mount -t reiser4 /dev/hdb1 /reiser4_testing
> > mount: special device /dev/hdb1 does not exist
>
> It would seem that your /dev/hdb1 block-special device node isn't present.
> Try `mknod /dev/hdb1 3 65'.
He's got devfs. Something change there recently?
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 22:10 ` Steven Cole
2005-02-23 22:54 ` Steven Cole
2005-02-23 23:03 ` Andrew Morton
@ 2005-02-24 0:44 ` Matt Mackall
2005-02-24 15:59 ` Steven Cole
2005-02-24 16:18 ` Steven Cole
2 siblings, 2 replies; 96+ messages in thread
From: Matt Mackall @ 2005-02-24 0:44 UTC (permalink / raw)
To: Steven Cole; +Cc: Andrew Morton, linux-kernel
On Wed, Feb 23, 2005 at 03:10:38PM -0700, Steven Cole wrote:
> Andrew Morton wrote:
> >Steven Cole <elenstev@mesatop.com> wrote:
>
> >>I am having trouble getting recent -mm kernels to boot on my test box.
> >>For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
> >>
> >>VFS: Cannot open root device "301" or unknown-block(3,1)
> >>Please append a correct "root=" boot option
> >>Kernel panic - not syncing: VFS: Unable to mount root fs on
> >>unknown-block(3,1)
> >>
> [snipped]
> >
> >Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0,
> >then retest.
>
> Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
> missing.
Can you retry CONFIG_BASE_FULL=n with Andrew's patch?
You may need to boot back into a sane kernel for LILO to operate properly.
--- 25/drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005
+++ 25-akpm/drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005
@@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- unsigned int unit = drive->select.all & (1 << 4);
+ unsigned int unit = (drive->select.all >> 4) & 1;
disk->major = hwif->major;
disk->first_minor = unit << PARTN_BITS;
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 0:44 ` Matt Mackall
@ 2005-02-24 15:59 ` Steven Cole
2005-02-24 16:18 ` Steven Cole
1 sibling, 0 replies; 96+ messages in thread
From: Steven Cole @ 2005-02-24 15:59 UTC (permalink / raw)
To: Matt Mackall; +Cc: Steven Cole, Andrew Morton, linux-kernel
Matt Mackall wrote:
> On Wed, Feb 23, 2005 at 03:10:38PM -0700, Steven Cole wrote:
>
>>Andrew Morton wrote:
>>
>>>Steven Cole <elenstev@mesatop.com> wrote:
>>
>>>>I am having trouble getting recent -mm kernels to boot on my test box.
>>>>For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
>>>>
>>>>VFS: Cannot open root device "301" or unknown-block(3,1)
>>>>Please append a correct "root=" boot option
>>>>Kernel panic - not syncing: VFS: Unable to mount root fs on
>>>>unknown-block(3,1)
>>>>
>>
>>[snipped]
>>
>>>Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0,
>>>then retest.
>>
>>Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
>>missing.
>
>
> Can you retry CONFIG_BASE_FULL=n with Andrew's patch?
>
> You may need to boot back into a sane kernel for LILO to operate properly.
>
> --- 25/drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005
> +++ 25-akpm/drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005
> @@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
> void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
> {
> ide_hwif_t *hwif = drive->hwif;
> - unsigned int unit = drive->select.all & (1 << 4);
> + unsigned int unit = (drive->select.all >> 4) & 1;
>
> disk->major = hwif->major;
> disk->first_minor = unit << PARTN_BITS;
>
Andrew's above patch fixes the hdb->hdq insanity, but I still need
CONFIG_BASE_FULL=y. I tried unsetting CONFIG_BASE_FULL, and again
got the "VFS: Cannot open root device" message (with akpm's patch).
Steven
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-24 0:44 ` Matt Mackall
2005-02-24 15:59 ` Steven Cole
@ 2005-02-24 16:18 ` Steven Cole
1 sibling, 0 replies; 96+ messages in thread
From: Steven Cole @ 2005-02-24 16:18 UTC (permalink / raw)
To: Matt Mackall; +Cc: Steven Cole, Andrew Morton, linux-kernel
Matt Mackall wrote:
> On Wed, Feb 23, 2005 at 03:10:38PM -0700, Steven Cole wrote:
>
>>Andrew Morton wrote:
>>
>>>Steven Cole <elenstev@mesatop.com> wrote:
>>
>>>>I am having trouble getting recent -mm kernels to boot on my test box.
>>>>For 2.6.11-rc3-mm2 and 2.6.11-rc4-mm1 I get the following:
>>>>
>>>>VFS: Cannot open root device "301" or unknown-block(3,1)
>>>>Please append a correct "root=" boot option
>>>>Kernel panic - not syncing: VFS: Unable to mount root fs on
>>>>unknown-block(3,1)
>>>>
>>
>>[snipped]
>>
>>>Please set CONFIG_BASE_FULL=y. Check that this causes CONFIG_BASE_SMALL=0,
>>>then retest.
>>
>>Yes, that worked. 2.6.11-rc4-mm1 now boots OK, but hdb1 seems to be
>>missing.
>
>
> Can you retry CONFIG_BASE_FULL=n with Andrew's patch?
>
> You may need to boot back into a sane kernel for LILO to operate properly.
>
> --- 25/drivers/ide/ide-probe.c~ide_init_disk-fix Wed Feb 23 16:24:44 2005
> +++ 25-akpm/drivers/ide/ide-probe.c Wed Feb 23 16:24:55 2005
> @@ -1269,7 +1269,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region)
> void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
> {
> ide_hwif_t *hwif = drive->hwif;
> - unsigned int unit = drive->select.all & (1 << 4);
> + unsigned int unit = (drive->select.all >> 4) & 1;
>
> disk->major = hwif->major;
> disk->first_minor = unit << PARTN_BITS;
>
Andrew's above patch fixes the hdb->hdq insanity, but I still need
CONFIG_BASE_FULL=y. I tried unsetting CONFIG_BASE_FULL, and again
got the "VFS: Cannot open root device" message (with akpm's patch).
Steven
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1 (VFS: Cannot open root device "301")
2005-02-23 16:37 ` 2.6.11-rc4-mm1 (VFS: Cannot open root device "301") Steven Cole
2005-02-23 20:17 ` Andrew Morton
@ 2005-02-23 22:45 ` Matt Mackall
1 sibling, 0 replies; 96+ messages in thread
From: Matt Mackall @ 2005-02-23 22:45 UTC (permalink / raw)
To: Steven Cole; +Cc: Andrew Morton, linux-kernel
On Wed, Feb 23, 2005 at 09:37:53AM -0700, Steven Cole wrote:
> I copied a working .config from an earlier kernel(-rc3), and ran make
> oldconfig, answering most of the new questions 'n'.
Then you get into trouble with stuff under CONFIG_EMBEDDED. Answering
'n' turns off stock functionality. Though you really ought not have
CONFIG_EMBEDDED turned on anyway. I'm not sure how CONFIG_BASE_SMALL
is causing problems as the blockdev bit got dropped already. I'll poke
around..
Andrew, looks like turning on EMBEDDED causes a bunch of options to
spill onto the general setup menu in menuconfig because of the
placement of the bool piece:
Fix up bustedness in menuconfig
Signed-off-by: Matt Mackall <mpm@selenic.com>
Index: mm1/init/Kconfig
===================================================================
--- mm1.orig/init/Kconfig 2005-02-23 13:32:38.000000000 -0800
+++ mm1/init/Kconfig 2005-02-23 14:27:18.699676896 -0800
@@ -274,11 +274,6 @@ config BASE_FULL
Disabling this option reduces the size of miscellaneous core
kernel data structures.
-config BASE_SMALL
- int
- default 0 if BASE_FULL
- default 1 if !BASE_FULL
-
config FUTEX
bool "Enable futex support" if EMBEDDED
default y
@@ -360,6 +355,11 @@ config TINY_SHMEM
default !SHMEM
bool
+config BASE_SMALL
+ int
+ default 0 if BASE_FULL
+ default 1 if !BASE_FULL
+
menu "Loadable module support"
config MODULES
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (2 preceding siblings ...)
2005-02-23 16:37 ` 2.6.11-rc4-mm1 (VFS: Cannot open root device "301") Steven Cole
@ 2005-02-23 17:07 ` Vincent Vanackere
2005-02-23 18:20 ` 2.6.11-rc4-mm1 Brice Goglin
` (12 subsequent siblings)
16 siblings, 0 replies; 96+ messages in thread
From: Vincent Vanackere @ 2005-02-23 17:07 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1312 bytes --]
I'm getting several modules with undefined symbols :
Kernel: arch/i386/boot/bzImage is ready
Building modules, stage 2.
MODPOST
*** Warning: "match_octal" [fs/udf/udf.ko] undefined!
*** Warning: "match_token" [fs/udf/udf.ko] undefined!
*** Warning: "match_int" [fs/udf/udf.ko] undefined!
*** Warning: "match_strdup" [fs/isofs/isofs.ko] undefined!
*** Warning: "match_token" [fs/isofs/isofs.ko] undefined!
*** Warning: "match_int" [fs/isofs/isofs.ko] undefined!
*** Warning: "match_octal" [fs/fuse/fuse.ko] undefined!
*** Warning: "match_token" [fs/fuse/fuse.ko] undefined!
*** Warning: "match_int" [fs/fuse/fuse.ko] undefined!
*** Warning: "match_octal" [fs/fat/fat.ko] undefined!
*** Warning: "match_strdup" [fs/fat/fat.ko] undefined!
*** Warning: "match_token" [fs/fat/fat.ko] undefined!
*** Warning: "match_int" [fs/fat/fat.ko] undefined!
*** Warning: "match_token" [fs/ext3/ext3.ko] undefined!
*** Warning: "match_int" [fs/ext3/ext3.ko] undefined!
*** Warning: "match_token" [fs/ext2/ext2.ko] undefined!
*** Warning: "match_int" [fs/ext2/ext2.ko] undefined!
*** Warning: "match_octal" [drivers/usb/core/usbcore.ko] undefined!
*** Warning: "match_token" [drivers/usb/core/usbcore.ko] undefined!
*** Warning: "match_int" [drivers/usb/core/usbcore.ko] undefined!
my .config is attached
Regards,
Vincent
[-- Attachment #2: config-2.6.11-rc4-mm1 --]
[-- Type: application/octet-stream, Size: 36312 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4-mm1
# Wed Feb 23 11:50:16 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_PCC is not set
# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
# CONFIG_PARIDE_PD is not set
# CONFIG_PARIDE_PCD is not set
# CONFIG_PARIDE_PF is not set
# CONFIG_PARIDE_PT is not set
# CONFIG_PARIDE_PG is not set
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_TARGET_NOTRACK is not set
# CONFIG_IP_NF_ARPTABLES is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# SuperIO subsystem support
#
# CONFIG_SC_SUPERIO is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
CONFIG_USB_ATI_REMOTE=m
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_REISER4_FS=y
# CONFIG_REISER4_CHECK is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_PRINTK_TIME=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (3 preceding siblings ...)
2005-02-23 17:07 ` 2.6.11-rc4-mm1 Vincent Vanackere
@ 2005-02-23 18:20 ` Brice Goglin
2005-02-23 21:24 ` 2.6.11-rc4-mm1 Dominik Brodowski
2005-02-23 21:05 ` 2.6.11-rc4-mm1 Benoit Boissinot
` (11 subsequent siblings)
16 siblings, 1 reply; 96+ messages in thread
From: Brice Goglin @ 2005-02-23 18:20 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1311 bytes --]
Andrew Morton a écrit :
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
Hi Andrew,
I can't get PCMCIA to work anymore since rc4-mm1.
It was working great with rc4 and rc3-mm1.
PCMCIA loads without any apparent problem (see attached dmesg).
But when I plug my orinoco card, nothing happens.
The hermes/orinoco modules are not even loaded as before.
cardctl insert/eject hangs.
Attached are dmesg and lsmod from rc4 and rc4-mm1, lspci and .config.
I'd like to help by reverting some patches.
But there seems to have tons of pcmcia modifications
since rc3-mm1.
Which one(s) do you think might be responsible for this ?
Regards,
Brice
> -pcmcia-add-support-ti-pci4510-cardbus-bridge.patch
> +pcmcia-bridge-resource-management-fix.patch
> +pcmcia-yenta_socket-ti4150-support.patch
> +pcmcia-pd6729-convert-to-pci_register_driver.patch
> +pcmcia-rsrc_nonstatic-sysfs-output.patch
> +pcmcia-rsrc_nonstatic-sysfs-input.patch
> +pcmcia-mark-resource-setup-as-done.patch
> +pcmcia-pcmcia_device_probe.patch
> +pcmcia-pcmcia_device_remove.patch
> +pcmcia-pcmcia_device_add.patch
> +pcmcia-use-bus_rescan_devices.patch
> +pcmcia-add-pcmcia-devices-autonomously.patch
> +pcmcia-determine-some-useful-information-about-devices.patch
> +pcmcia-per-device-sysfs-output.patch
[-- Attachment #2: config-2.6.11-rc4-mm1 --]
[-- Type: text/plain, Size: 36940 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc4-mm1
# Wed Feb 23 10:57:08 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION="=LoulousMobile"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_BASE_SMALL=0
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda4"
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_PCC is not set
# CONFIG_ACPI_SONY is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_LIMIT is not set
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
# CONFIG_IP_NF_MATCH_MULTIPORT is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# SuperIO subsystem support
#
# CONFIG_SC_SUPERIO is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# ISA devices
#
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_MAESTRO3=m
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_HDA_INTEL=m
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_VXP440 is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=m
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_ACL=y
CONFIG_NFS_ACL_SUPPORT=m
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_PRINTK_TIME=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
[-- Attachment #3: dmesg.2.6.11-rc4 --]
[-- Type: text/plain, Size: 15457 bytes --]
pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000f9970
ACPI: RSDT (v001 COMPAQ CPQ0030 0x31120320 CPQ 0x00000001) @ 0x27ff0c84
ACPI: FADT (v002 COMPAQ CPQ0030 0x00000002 CPQ 0x00000001) @ 0x27ff0c00
ACPI: SSDT (v001 COMPAQ CPQCPU 0x00001001 MSFT 0x0100000e) @ 0x27ff7bcb
ACPI: SSDT (v001 COMPAQ CPQGysr 0x00001001 MSFT 0x0100000e) @ 0x27ff7c16
ACPI: DSDT (v001 COMPAQ EVON600C 0x00010000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6-rc ro root=302 resume=/dev/hda4
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01502000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0479000 soft=c0478000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 996.669 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 644948k/655168k available (2213k kernel code, 9700k reserved, 1127k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1978.36 BogoMIPS (lpj=989184)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:..........................................................................................................................................................................................................................................................................
Table [DSDT](id F006) - 833 Objects with 89 Devices 266 Methods 26 Regions
Parsing all Control Methods:.
Table [SSDT](id F003) - 3 Objects with 0 Devices 1 Methods 0 Regions
Parsing all Control Methods:..
Table [SSDT](id F004) - 4 Objects with 0 Devices 2 Methods 0 Regions
ACPI Namespace successfully loaded at root c0491500
ACPI: setting ELCR to 0200 (from 0800)
evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf04dd, last bus=4
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050125
evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C13E (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C18F (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C1DC (name not of form _Lxx or _Exx)
evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 3 Wake, Enabled 1 Runtime GPEs in this block
evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C13E (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C18F (name not of form _Lxx or _Exx)
evgpeblk-0275 [08] ev_save_method_info : Unknown GPE method type: C1DC (name not of form _Lxx or _Exx)
evgpeblk-0979 [06] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 2 Wake, Enabled 5 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..................................................................................................
Initialized 25/26 Regions 0/0 Fields 26/26 Buffers 47/56 Packages (849 nodes)
Executing all Device _STA and_INI methods:...........................................................................................
91 Devices found containing: 91 _STA, 8 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C03E] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.C03E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C03F._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C052._PRT]
ACPI: Power Resource [C14E] (on)
ACPI: Power Resource [C167] (on)
ACPI: Power Resource [C16B] (on)
ACPI: Power Resource [C174] (on)
ACPI: PCI Interrupt Link [C0BA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BE] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BF] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 11) *0, disabled.
ACPI: Power Resource [C1F3] (off)
ACPI: Power Resource [C1F4] (off)
ACPI: Power Resource [C1F5] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:0b: ioport range 0x140-0x14f has been reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x1000-0x1087 could not be reserved
pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fakephp: Fake PCI Hot Plug Controller Driver
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ACPI: PCI Interrupt Link [C0BB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
radeonfb: PLL min 12000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:00.0): ATI Radeon LY
ACPI: AC Adapter [C1A2] (on-line)
ACPI: Battery Slot [C19F] (battery present)
ACPI: Battery Slot [C1A0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C1A3]
ACPI: Lid Switch [C1A4]
ACPI: Fan [C1F6] (off)
ACPI: Fan [C1F7] (off)
ACPI: Fan [C1F8] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [TZ1] (44 C)
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Maximum main memory to use for agp memory: 564M
agpgart: AGP aperture is 256M @ 0x60000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc Radeon Mobility M6 LY
ACPI: PS/2 Keyboard Controller [C171] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [C172] at irq 12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [C0BE] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0x40100000, irq 11, MAC addr 00:02:A5:B5:03:7C
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [C0BC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4060-0x4067, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4068-0x406f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N020ATDA04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Compaq DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.8
180 degree mounted touchpad
Sensor: 27
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: Synaptics pass-through port at isa0060/serio4/input0
input: PS/2 Generic Mouse on synaptics-pt/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading swsusp image.
swsusp: Resume From Partition: /dev/hda4
<3>swsusp: Suspend partition has wrong signature?
swsusp: Error -22 resuming
PM: Resume from disk failed.
ACPI wakeup devices:
C052 C17E C185 C0A4 C0AA C19F C1A0 C1A3 C1A4
ACPI: (supports S0 S1 S3 S4 S4bios S5)
EXT3-fs: hda2: orphan cleanup on readonly fs
kjournald starting. Commit interval 5 seconds
ext3_orphan_cleanup: deleting unreferenced inode 531211
ext3_orphan_cleanup: deleting unreferenced inode 531208
EXT3-fs: hda2: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 665272k swap on /dev/hda4. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
Linux video capture interface: v1.00
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver spca50x
/home/src/spca5xx-20050206/drivers/usb/spca50x.c: spca5xx driver 56.02.06 registered
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt Link [C0BA] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: 0000:02:03.0 has unsupported PM cap regs version (1)
ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.0 [0e11:004e]
PCI: 0000:02:03.0 has unsupported PM cap regs version (1)
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
PCI: 0000:02:03.1 has unsupported PM cap regs version (1)
ACPI: PCI interrupt 0000:02:03.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.1 [0e11:004e]
PCI: 0000:02:03.1 has unsupported PM cap regs version (1)
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.1, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
irda_init()
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
input: PC Speaker
Real Time Clock Driver v1.12
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1)
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0x4000
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [C0BD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801CA/CAM USB (Hub #2)
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0x4020
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801CA/CAM USB (Hub #3)
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0x4040
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[-- Attachment #4: dmesg.2.6.11-rc4-mm1 --]
[-- Type: text/plain, Size: 11467 bytes --]
s on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 2 Wake, Enabled 5 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..................................................................................................
Initialized 25/26 Regions 0/0 Fields 26/26 Buffers 47/56 Packages (849 nodes)
Executing all Device _STA and_INI methods:...........................................................................................
91 Devices found containing: 91 _STA, 8 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [C03E] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
ACPI: PCI Interrupt Routing Table [\_SB_.C03E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C03F._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C052._PRT]
ACPI: Power Resource [C14E] (on)
ACPI: Power Resource [C167] (on)
ACPI: Power Resource [C16B] (on)
ACPI: Power Resource [C174] (on)
ACPI: PCI Interrupt Link [C0BA] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BB] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BE] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0BF] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 11) *0, disabled.
ACPI: Power Resource [C1F3] (off)
ACPI: Power Resource [C1F4] (off)
ACPI: Power Resource [C1F5] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0x140-0x14f has been reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x1000-0x1087 could not be reserved
pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fakephp: Fake PCI Hot Plug Controller Driver
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
ACPI: PCI Interrupt Link [C0BB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, System=166.00 MHz
radeonfb: PLL min 12000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
Console: switching to colour frame buffer device 128x48
radeonfb: Dynamic Clock Power Management enabled
radeonfb (0000:01:00.0): ATI Radeon LY
ACPI: AC Adapter [C1A2] (on-line)
ACPI: Battery Slot [C19F] (battery present)
ACPI: Battery Slot [C1A0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [C1A3]
ACPI: Lid Switch [C1A4]
ACPI: Fan [C1F6] (off)
ACPI: Fan [C1F7] (off)
ACPI: Fan [C1F8] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [TZ1] (43 C)
inotify device minor=63
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 256M @ 0x60000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies Inc Radeon Mobility M6 LY
PNP: PS/2 Keyboard Controller [PNP0303,C171] at 0x60,0x64 irq 1
PNP: PS/2 Mouse Controller [PNP0f13,C172] irq 12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [C0BE] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0x40100000, irq 0, MAC addr 0B:00:02:A5:B5:03
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [C0BC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x4060-0x4067, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x4068-0x406f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N020ATDA04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Compaq DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading swsusp image.
swsusp: Resume From Partition: /dev/hda4
input: AT Translated Set 2 keyboard on isa0060/serio0
<3>swsusp: Suspend partition has wrong signature?
swsusp: Error -22 resuming
PM: Resume from disk failed.
ACPI wakeup devices:
C052 C17E C185 C0A4 C0AA C19F C1A0 C1A3 C1A4
ACPI: (supports S0 S1 S3 S4 S4bios S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
Synaptics Touchpad, model: 1
Firmware: 5.8
180 degree mounted touchpad
Sensor: 27
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
EXT3-fs: hda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 531493
ext3_orphan_cleanup: deleting unreferenced inode 531356
ext3_orphan_cleanup: deleting unreferenced inode 531211
ext3_orphan_cleanup: deleting unreferenced inode 531208
EXT3-fs: hda2: 4 orphan inodes deleted
EXT3-fs: recovery complete.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 184k freed
input: PS/2 Generic Mouse on synaptics-pt/serio0
Adding 665272k swap on /dev/hda4. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt Link [C0BA] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 11 (level, low) -> IRQ 11
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.0 [0e11:004e]
yenta 0000:02:03.0: no resource of type 100 available, trying to continue...
yenta 0000:02:03.0: no resource of type 100 available, trying to continue...
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.0, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:02:03.1[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:03.1 [0e11:004e]
yenta 0000:02:03.1: no resource of type 100 available, trying to continue...
yenta 0000:02:03.1: no resource of type 100 available, trying to continue...
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:03.1, mfunc 0x01001002, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
irda_init()
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
input: PC Speaker
Real Time Clock Driver v1.12
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801CA/CAM USB (Hub #1)
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [C0BD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801CA/CAM USB (Hub #2)
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004020
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801CA/CAM USB (Hub #3)
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hw_random hardware driver 1.0.0 loaded
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x100-0x4ff: excluding 0x100-0x107 0x200-0x207
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: XFree86 tried to set rate=x7. Setting to x4 mode.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[-- Attachment #5: lsmod.2.6.11-rc4 --]
[-- Type: text/plain, Size: 1390 bytes --]
Module Size Used by
pcmcia 19304 4
hw_random 4468 0
uhci_hcd 30352 0
rtc 10872 0
pcspkr 3236 0
parport_pc 22660 0
parport 20992 1 parport_pc
irtty_sir 7616 0
sir_dev 15724 1 irtty_sir
irda 188028 2 irtty_sir,sir_dev
crc_ccitt 1696 1 irda
yenta_socket 20008 2
rsrc_nonstatic 9120 1 yenta_socket
pcmcia_core 42592 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_maestro3 20772 0
snd_ac97_codec 75192 1 snd_maestro3
snd_pcm_oss 49024 0
snd_mixer_oss 17824 1 snd_pcm_oss
snd_pcm 84776 3 snd_maestro3,snd_ac97_codec,snd_pcm_oss
snd_timer 21924 1 snd_pcm
snd_page_alloc 7620 1 snd_pcm
snd 48356 6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7712 1 snd
nls_iso8859_15 4288 1
nls_cp850 4544 1
vfat 11360 1
fat 36092 1 vfat
nls_base 6432 4 nls_iso8859_15,nls_cp850,vfat,fat
dm_mod 53244 0
spca50x 288088 0
usbcore 110872 3 uhci_hcd,spca50x
videodev 7616 1 spca50x
[-- Attachment #6: lsmod.2.6.11-rc4-mm1 --]
[-- Type: text/plain, Size: 1309 bytes --]
Module Size Used by
pcmcia 22056 5
hw_random 4404 0
uhci_hcd 30320 0
usbcore 112440 2 uhci_hcd
rtc 11096 0
pcspkr 3236 0
parport_pc 22788 0
parport 21248 1 parport_pc
irtty_sir 7552 0
sir_dev 16236 1 irtty_sir
irda 190236 2 irtty_sir,sir_dev
crc_ccitt 1696 1 irda
yenta_socket 20392 3
rsrc_nonstatic 11488 1 yenta_socket
pcmcia_core 43972 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_maestro3 20804 0
snd_ac97_codec 75736 1 snd_maestro3
snd_pcm_oss 48320 0
snd_mixer_oss 17248 1 snd_pcm_oss
snd_pcm 84648 3 snd_maestro3,snd_ac97_codec,snd_pcm_oss
snd_timer 21956 1 snd_pcm
snd_page_alloc 7748 1 snd_pcm
snd 48068 6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7712 1 snd
nls_iso8859_15 4288 1
nls_cp850 4544 1
vfat 11360 1
fat 35644 1 vfat
nls_base 6432 4 nls_iso8859_15,nls_cp850,vfat,fat
dm_mod 52508 0
[-- Attachment #7: lspci --]
[-- Type: text/plain, Size: 8562 bytes --]
0000:00:00.0 Host bridge: Intel Corp. 82830 830 Chipset Host Bridge (rev 02)
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at 60000000 (32-bit, prefetchable) [size=256M]
Capabilities: [40] #09 [0105]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
0000:00:01.0 PCI bridge: Intel Corp. 82830 830 Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 40200000-402fffff
Prefetchable memory behind bridge: 48000000-4fffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 4000 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 4020 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 4040 [size=32]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 41) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=04, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 40000000-401fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation: Unknown device 0030
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 4060 [size=16]
Region 5: Memory at 28000000 (32-bit, non-prefetchable) [size=1K]
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation: Unknown device b111
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 48000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at 40200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:03.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: Compaq Computer Corporation: Unknown device 004e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 28400000-287ff000 (prefetchable)
Memory window 1: 40040000-4007f000
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:02:03.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: Compaq Computer Corporation: Unknown device 004e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40080000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 28800000-28bff000 (prefetchable)
Memory window 1: 400c0000-400ff000
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:02:04.0 Communication controller: Agere Systems (former Lucent Microelectronics) LT WinModem (rev 02)
Subsystem: AMBIT Microsystem Corp.: Unknown device 0450
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40180000 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at 2840 [size=8]
Region 2: I/O ports at 2000 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=160mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller (rev 41)
Subsystem: Compaq Computer Corporation: Unknown device 0098
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2800 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
0000:02:09.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 12)
Subsystem: Compaq Computer Corporation: Unknown device 0094
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 2400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1
2005-02-23 18:20 ` 2.6.11-rc4-mm1 Brice Goglin
@ 2005-02-23 21:24 ` Dominik Brodowski
2005-02-23 22:00 ` 2.6.11-rc4-mm1 Brice Goglin
2005-02-23 23:56 ` 2.6.11-rc4-mm1 Brice Goglin
0 siblings, 2 replies; 96+ messages in thread
From: Dominik Brodowski @ 2005-02-23 21:24 UTC (permalink / raw)
To: Brice Goglin; +Cc: Andrew Morton, linux-kernel
Hi,
On Wed, Feb 23, 2005 at 07:20:09PM +0100, Brice Goglin wrote:
> Andrew Morton a écrit :
> >ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
>
> I can't get PCMCIA to work anymore since rc4-mm1.
> It was working great with rc4 and rc3-mm1.
>
> PCMCIA loads without any apparent problem (see attached dmesg).
One thing surprises me: the sockets don't get IO resources allocated:
> yenta 0000:02:03.1: no resource of type 100 available, trying to continue...
> yenta 0000:02:03.1: no resource of type 100 available, trying to continue...
which doesn't happen in earlier kernels. In lspci this shows itself as:
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
> Which one(s) do you think might be responsible for this ?
My gut tells me
> >+pcmcia-bridge-resource-management-fix.patch
is responsible for this "no resource available" message, because the other
ones relate to other areas.
If the error persists, it'd be great if you could apply the other PCMCIA
patches to the working -rc4 tree and check if it continues to work -- or,
the other way round, removing the PCMCIA patches completely and checking
whether it works then.
Thanks,
Dominik
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1
2005-02-23 21:24 ` 2.6.11-rc4-mm1 Dominik Brodowski
@ 2005-02-23 22:00 ` Brice Goglin
2005-02-23 23:56 ` 2.6.11-rc4-mm1 Brice Goglin
1 sibling, 0 replies; 96+ messages in thread
From: Brice Goglin @ 2005-02-23 22:00 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: Andrew Morton, linux-kernel
Dominik Brodowski a écrit :
>>>+pcmcia-bridge-resource-management-fix.patch
>
> is responsible for this "no resource available" message, because the other
> ones relate to other areas.
Yes, good catch, reverting it makes PCMCIA work again.
Let me know if you want me to test some patches.
Thanks,
Brice
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 21:24 ` 2.6.11-rc4-mm1 Dominik Brodowski
2005-02-23 22:00 ` 2.6.11-rc4-mm1 Brice Goglin
@ 2005-02-23 23:56 ` Brice Goglin
1 sibling, 0 replies; 96+ messages in thread
From: Brice Goglin @ 2005-02-23 23:56 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: Andrew Morton, linux-kernel
Dominik Brodowski a écrit :
>>>+pcmcia-bridge-resource-management-fix.patch
>
> is responsible for this "no resource available" message, because the other
> ones relate to other areas.
This line from dmesg-2.6.11-rc4 is no longer present in -rc4-mm1:
PCI: Transparent bridge - 0000:00:1e.0
This is probably due to this patch too, right ?
Was it supposed to changed that ?
lspci -tv says that the PCMCIA bridge whose resources are broken
is behind this no-longer transparent bridge.
-[00]-+-00.0 Intel Corp. 82830 830 Chipset Host Bridge
+-01.0-[01]----00.0 ATI Technologies Inc Radeon Mobility M6 LY
+-1d.0 Intel Corp. 82801CA/CAM USB (Hub #1)
+-1d.1 Intel Corp. 82801CA/CAM USB (Hub #2)
+-1d.2 Intel Corp. 82801CA/CAM USB (Hub #3)
+-1e.0-[02-04]--+-03.0 Texas Instruments PCI1420
| +-03.1 Texas Instruments PCI1420
| +-04.0 Agere Systems (former Lucent Microelectronics) LT WinModem
| +-08.0 Intel Corp. 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller
| \-09.0 ESS Technology ES1988 Allegro-1
+-1f.0 Intel Corp. 82801CAM ISA Bridge (LPC)
\-1f.1 Intel Corp. 82801CAM IDE U100
Hope this helps.
Brice
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (4 preceding siblings ...)
2005-02-23 18:20 ` 2.6.11-rc4-mm1 Brice Goglin
@ 2005-02-23 21:05 ` Benoit Boissinot
2005-02-23 21:42 ` [PATCH] process-wide itimer typo fixes Roland McGrath
2005-02-23 21:30 ` 2.6.11-rc4-mm1 Adrian Bunk
` (10 subsequent siblings)
16 siblings, 1 reply; 96+ messages in thread
From: Benoit Boissinot @ 2005-02-23 21:05 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Roland McGrath
On Wed, Feb 23, 2005 at 01:42:33AM -0800, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
>
>
> - Various fixes and updates all over the place. Things seem to have slowed
> down a bit.
>
> - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> material, please tell me.
>
>
>
> Changes since 2.6.11-rc3-mm1:
>
> make-itimer_real-per-process.patch
> make ITIMER_REAL per-process
>
> make-itimer_prof-itimer_virtual-per-process.patch
> make ITIMER_PROF, ITIMER_VIRTUAL per-process
>
gcc-4.0 warns with reasons on this patches:
kernel/itimer.c: In function ‘do_getitimer’:
kernel/itimer.c:61: warning: ‘val’ is used uninitialized in this
function
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
--- linux/kernel/itimer.c 2005-02-23 12:16:36.000000000 +0100
+++ linux-test/kernel/itimer.c 2005-02-23 21:53:10.000000000 +0100
@@ -58,7 +58,7 @@ int do_getitimer(int which, struct itime
if (cputime_le(cval, utime)) { /* about to fire */
val = jiffies_to_cputime(1);
} else {
- val = cputime_sub(val, utime);
+ val = cputime_sub(cval, utime);
}
}
spin_unlock_irq(&tsk->sighand->siglock);
@@ -84,7 +84,7 @@ int do_getitimer(int which, struct itime
if (cputime_le(cval, ptime)) { /* about to fire */
val = jiffies_to_cputime(1);
} else {
- val = cputime_sub(val, ptime);
+ val = cputime_sub(cval, ptime);
}
}
spin_unlock_irq(&tsk->sighand->siglock);
^ permalink raw reply [flat|nested] 96+ messages in thread* [PATCH] process-wide itimer typo fixes
2005-02-23 21:05 ` 2.6.11-rc4-mm1 Benoit Boissinot
@ 2005-02-23 21:42 ` Roland McGrath
0 siblings, 0 replies; 96+ messages in thread
From: Roland McGrath @ 2005-02-23 21:42 UTC (permalink / raw)
To: Benoit Boissinot; +Cc: Andrew Morton, linux-kernel
Thanks for finding that.
Ack! I did a quick merge of my well-tested patches with the cputime_t
stuff, and apparently didn't do quite as much testing as I thought I did.
There was a little query/replace error in my per-process-itimer-cpu patch
now in -mm. Your patch is necessary but not sufficient. This patch fixes
all the errors.
Thanks,
Roland
Signed-off-by: Roland McGrath <roland@redhat.com>
--- linux-2.6/kernel/itimer.c
+++ linux-2.6/kernel/itimer.c
@@ -56,9 +56,9 @@ int do_getitimer(int which, struct itime
t = next_thread(t);
} while (t != tsk);
if (cputime_le(cval, utime)) { /* about to fire */
- val = jiffies_to_cputime(1);
+ cval = jiffies_to_cputime(1);
} else {
- val = cputime_sub(val, utime);
+ cval = cputime_sub(cval, utime);
}
}
spin_unlock_irq(&tsk->sighand->siglock);
@@ -82,9 +82,9 @@ int do_getitimer(int which, struct itime
t = next_thread(t);
} while (t != tsk);
if (cputime_le(cval, ptime)) { /* about to fire */
- val = jiffies_to_cputime(1);
+ cval = jiffies_to_cputime(1);
} else {
- val = cputime_sub(val, ptime);
+ cval = cputime_sub(cval, ptime);
}
}
spin_unlock_irq(&tsk->sighand->siglock);
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (5 preceding siblings ...)
2005-02-23 21:05 ` 2.6.11-rc4-mm1 Benoit Boissinot
@ 2005-02-23 21:30 ` Adrian Bunk
2005-02-23 21:49 ` 2.6.11-rc4-mm1 (compile stats) John Cherry
` (9 subsequent siblings)
16 siblings, 0 replies; 96+ messages in thread
From: Adrian Bunk @ 2005-02-23 21:30 UTC (permalink / raw)
To: Andrew Morton, Sam Ravnborg; +Cc: linux-kernel
On Wed, Feb 23, 2005 at 01:42:33AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.11-rc3-mm1:
>...
> bk-kbuild.patch
>...
This adds -Wno-pointer-sign to the main Makefile a second time.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1 (compile stats)
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (6 preceding siblings ...)
2005-02-23 21:30 ` 2.6.11-rc4-mm1 Adrian Bunk
@ 2005-02-23 21:49 ` John Cherry
2005-02-23 22:22 ` 2.6.11-rc4-mm1 Francois Romieu
` (8 subsequent siblings)
16 siblings, 0 replies; 96+ messages in thread
From: John Cherry @ 2005-02-23 21:49 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel@vger.kernel.org
Linux 2.6 (mm tree) Compile Statistics (gcc 3.4.1)
Web page with links to complete details:
http://developer.osdl.org/cherry/compile/
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.11-rc4-mm1 22w/0e 0w/0e 271w/0e 10w/0e 25w/0e 249w/0e
2.6.11-rc3-mm2 14w/0e 0w/0e 192w/0e 6w/0e 19w/0e 172w/0e
2.6.11-rc3-mm1 13w/10e 0w/7e 196w/12e 6w/0e 18w/12e 177w/0e
2.6.11-rc2-mm2 15w/0e 0w/0e 201w/0e 6w/0e 18w/0e 182w/0e
2.6.11-rc2-mm1 15w/0e 0w/0e 306w/14e 6w/0e 18w/0e 294w/0e
2.6.11-rc1-mm2 21w/0e 0w/0e 316w/9e 6w/0e 22w/0e 294w/0e
2.6.11-rc1-mm1 21w/0e 0w/0e 319w/0e 6w/0e 23w/0e 298w/0e
2.6.10-mm3 21w/0e 0w/0e 320w/0e 6w/0e 23w/0e 299w/0e
2.6.10-mm2 21w/0e 0w/0e 440w/0e 6w/0e 23w/0e 420w/0e
2.6.10-mm1 12w/0e 0w/0e 414w/0e 6w/0e 17w/0e 399w/0e
2.6.10-rc3-mm1 12w/0e 0w/0e 414w/0e 6w/0e 16w/0e 401w/0e
2.6.10-rc2-mm4 15w/0e 1w/7e 421w/0e 6w/0e 16w/0e 408w/0e
2.6.10-rc2-mm3 15w/0e 0w/0e 1255w/12e 66w/0e 16w/0e 1507w/0e
2.6.10-rc2-mm2 15w/0e 0w/0e 1362w/15e 65w/0e 16w/0e 1612w/2e
2.6.10-rc2-mm1 15w/0e 0w/0e 1405w/11e 65w/0e 16w/0e 1652w/0e
2.6.10-rc1-mm5 16w/0e 0w/0e 1587w/0e 65w/0e 20w/0e 1834w/0e
2.6.10-rc1-mm4 16w/0e 0w/0e 1485w/9e 65w/0e 20w/0e 1732w/0e
(Compiles with gcc 3.2.2)
2.6.10-rc1-mm3 7w/31e 0w/9e 496w/141e 4w/0e 4w/50e 693w/83e
2.6.10-rc1-mm2 16w/1e 1w/1e 529w/1e 4w/0e 12w/1e 729w/0e
2.6.10-mm1 12w/0e 0w/0e 414w/0e 6w/0e 17w/0e 399w/0e
2.6.10-rc3-mm1 12w/0e 0w/0e 414w/0e 6w/0e 16w/0e 401w/0e
2.6.10-rc2-mm4 15w/0e 1w/7e 421w/0e 6w/0e 16w/0e 408w/0e
2.6.10-rc2-mm3 15w/0e 0w/0e 1255w/12e 66w/0e 16w/0e 1507w/0e
2.6.10-rc2-mm2 15w/0e 0w/0e 1362w/15e 65w/0e 16w/0e 1612w/2e
2.6.10-rc2-mm1 15w/0e 0w/0e 1405w/11e 65w/0e 16w/0e 1652w/0e
2.6.10-rc1-mm5 16w/0e 0w/0e 1587w/0e 65w/0e 20w/0e 1834w/0e
2.6.10-rc1-mm4 16w/0e 0w/0e 1485w/9e 65w/0e 20w/0e 1732w/0e
(Compiles with gcc 3.2.2)
2.6.10-rc1-mm3 7w/31e 0w/9e 496w/141e 4w/0e 4w/50e 693w/83e
2.6.10-rc1-mm2 16w/1e 1w/1e 529w/1e 4w/0e 12w/1e 729w/0e
2.6.10-rc1-mm1 16w/1e 1w/1e 592w/1e 4w/0e 13w/1e 857w/0e
2.6.9-mm1 6w/1e 1w/1e 1761w/15e 65w/0e 9w/0e 2086w/0e
2.6.9-rc4-mm1 5w/0e 0w/0e 1766w/11e 43w/0e 6w/0e 1798w/0e
2.6.9-rc3-mm3 5w/0e 0w/0e 1756w/11e 43w/0e 4w/0e 1786w/0e
2.6.9-rc3-mm2 10w/0e 4w/9e 1754w/14e 43w/0e 4w/0e 1782w/1e
2.6.9-rc3-mm1 10w/0e 4w/10e 1768w/0e 43w/0e 4w/0e 1796w/0e
2.6.9-rc2-mm4 10w/0e 5w/0e 2573w/0e 41w/0e 4w/0e 2600w/0e
2.6.9-rc2-mm3 10w/0e 5w/0e 2400w/0e 41w/0e 4w/0e 2435w/0e
2.6.9-rc2-mm2 10w/0e 5w/0e 2919w/0e 41w/0e 4w/0e 2954w/0e
2.6.9-rc2-mm1 0w/0e 2w/0e 3541w/9e 41w/0e 3w/9e 3567w/0e
2.6.9-rc1-mm4 0w/0e 1w/0e 55w/0e 3w/0e 2w/0e 48w/0e
2.6.9-rc1-mm3 0w/0e 0w/0e 55w/13e 3w/0e 1w/0e 49w/1e
2.6.9-rc1-mm2 0w/0e 0w/0e 53w/11e 3w/0e 1w/0e 47w/0e
2.6.9-rc1-mm1 0w/0e 0w/0e 80w/0e 4w/0e 1w/0e 74w/0e
2.6.8.1-mm4 0w/0e 0w/0e 78w/0e 4w/0e 1w/0e 73w/0e
2.6.8.1-mm3 0w/96e 0w/0e 78w/97e 4w/0e 1w/0e 74w/89e
2.6.8.1-mm2 0w/96e 0w/0e 78w/97e 4w/0e 1w/0e 74w/89e
2.6.8.1-mm1 0w/0e 0w/0e 78w/0e 4w/0e 1w/0e 74w/0e
2.6.8-rc4-mm1 0w/0e 0w/5e 81w/0e 4w/0e 1w/0e 75w/0e
2.6.8-rc3-mm2 1w/7e 0w/5e 82w/8e 4w/0e 2w/8e 75w/0e
2.6.8-rc3-mm1 0w/0e 1w/5e 81w/9e 4w/0e 1w/0e 75w/0e
2.6.8-rc2-mm2 0w/0e 4w/5e 87w/9e 4w/0e 1w/0e 80w/0e
2.6.8-rc2-mm1 0w/0e 0w/0e 83w/9e 3w/0e 1w/0e 81w/0e
2.6.8-rc1-mm1 0w/0e 0w/0e 88w/9e 5w/0e 1w/0e 87w/0e
2.6.7-mm7 0w/0e 0w/0e 89w/9e 5w/0e 1w/0e 84w/0e
2.6.7-mm6 0w/0e 0w/0e 85w/9e 5w/0e 1w/0e 80w/0e
2.6.7-mm5 0w/0e 0w/0e 92w/0e 5w/0e 1w/0e 87w/0e
2.6.7-mm4 0w/0e 0w/0e 94w/0e 5w/0e 1w/0e 89w/0e
2.6.7-mm3 0w/0e 0w/0e 90w/6e 5w/0e 1w/0e 86w/0e
2.6.7-mm2 0w/0e 0w/0e 109w/0e 7w/0e 1w/0e 106w/0e
2.6.7-mm1 0w/0e 5w/0e 108w/0e 5w/0e 1w/0e 104w/0e
2.6.7-rc3-mm2 0w/0e 5w/0e 105w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc3-mm1 0w/0e 5w/0e 104w/10e 5w/0e 2w/0e 100w/2e
2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e
2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e
2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e
2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e
2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e
2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e
2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e
2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e
2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e
2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e
2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e
2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e
2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e
2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e
2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e
2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e
2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e
2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e
2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e
2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e
2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e
2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e
2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e
2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e
2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e
2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e
2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e
2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e
2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e
2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e
2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e
2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e
2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e
2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e
2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e
2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e
2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e
2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e
2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e
2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e
2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e
2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e
2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e
2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e
2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e
John
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (7 preceding siblings ...)
2005-02-23 21:49 ` 2.6.11-rc4-mm1 (compile stats) John Cherry
@ 2005-02-23 22:22 ` Francois Romieu
2005-02-23 22:38 ` 2.6.11-rc4-mm1 J.A. Magallon
` (7 subsequent siblings)
16 siblings, 0 replies; 96+ messages in thread
From: Francois Romieu @ 2005-02-23 22:22 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Jeff Garzik
Andrew Morton <akpm@osdl.org> :
[...]
> - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> material, please tell me.
Any chance to convince the alien who took control of Jeff's libata queue to
push:
r8169: synchronization and balancing when the device is closed
(1.1982.1.58 ?)
Test case on current 2.6.11-rc4:
- ifconfig ethX 10.0.0.1 up
- ifconfig ethX down
- ifconfig ethX 10.0.0.1 up
-> Rx does not work any more
- ifconfig ethX down
-> command hangs
--
Ueimor
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (8 preceding siblings ...)
2005-02-23 22:22 ` 2.6.11-rc4-mm1 Francois Romieu
@ 2005-02-23 22:38 ` J.A. Magallon
2005-02-23 23:12 ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-23 23:07 ` 2.6.11-rc4-mm1 Ed Tomlinson
` (6 subsequent siblings)
16 siblings, 1 reply; 96+ messages in thread
From: J.A. Magallon @ 2005-02-23 22:38 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On 02.23, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
>
>
> - Various fixes and updates all over the place. Things seem to have slowed
> down a bit.
>
> - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> material, please tell me.
>
Two points:
- I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.
- hdb is missing. initscripts show an strange message about hdq ??
As I read the same on other post, I think something has screwed the
ide device naming scheme ...
TIA
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.10-jam10 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #2
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1
2005-02-23 22:38 ` 2.6.11-rc4-mm1 J.A. Magallon
@ 2005-02-23 23:12 ` Ed Tomlinson
2005-02-23 23:40 ` 2.6.11-rc4-mm1 Dmitry Torokhov
0 siblings, 1 reply; 96+ messages in thread
From: Ed Tomlinson @ 2005-02-23 23:12 UTC (permalink / raw)
To: J.A. Magallon; +Cc: Andrew Morton, linux-kernel
On Wednesday 23 February 2005 17:38, J.A. Magallon wrote:
>
> On 02.23, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
> >
> >
> > - Various fixes and updates all over the place. Things seem to have slowed
> > down a bit.
> >
> > - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> > material, please tell me.
> >
>
> Two points:
>
> - I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.
Mine too. Details sent in another message...
Ed
> - hdb is missing. initscripts show an strange message about hdq ??
> As I read the same on other post, I think something has screwed the
> ide device naming scheme ...
>
> TIA
>
> --
> J.A. Magallon <jamagallon()able!es> \ Software is like sex:
> werewolf!able!es \ It's better when it's free
> Mandrakelinux release 10.2 (Cooker) for i586
> Linux 2.6.10-jam10 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #2
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 23:12 ` 2.6.11-rc4-mm1 Ed Tomlinson
@ 2005-02-23 23:40 ` Dmitry Torokhov
2005-02-24 0:20 ` 2.6.11-rc4-mm1 Ed Tomlinson
` (2 more replies)
0 siblings, 3 replies; 96+ messages in thread
From: Dmitry Torokhov @ 2005-02-23 23:40 UTC (permalink / raw)
To: Ed Tomlinson; +Cc: J.A. Magallon, Andrew Morton, linux-kernel
On Wednesday 23 February 2005 18:12, Ed Tomlinson wrote:
> On Wednesday 23 February 2005 17:38, J.A. Magallon wrote:
> >
> > On 02.23, Andrew Morton wrote:
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
> > >
> > >
> > > - Various fixes and updates all over the place. Things seem to have slowed
> > > down a bit.
> > >
> > > - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> > > material, please tell me.
> > >
> >
> > Two points:
> >
> > - I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.
>
> Mine too. Details sent in another message...
>
Does i8042.nopnp help?
--
Dmitry
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: 2.6.11-rc4-mm1
2005-02-23 23:40 ` 2.6.11-rc4-mm1 Dmitry Torokhov
@ 2005-02-24 0:20 ` Ed Tomlinson
2005-02-24 0:26 ` 2.6.11-rc4-mm1 Fabian Fenaut
2005-02-25 0:06 ` 2.6.11-rc4-mm1 J.A. Magallon
2 siblings, 0 replies; 96+ messages in thread
From: Ed Tomlinson @ 2005-02-24 0:20 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: J.A. Magallon, Andrew Morton, linux-kernel
On Wednesday 23 February 2005 18:40, Dmitry Torokhov wrote:
> On Wednesday 23 February 2005 18:12, Ed Tomlinson wrote:
> > On Wednesday 23 February 2005 17:38, J.A. Magallon wrote:
> > >
> > > On 02.23, Andrew Morton wrote:
> > > >
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
> > > >
> > > >
> > > > - Various fixes and updates all over the place. Things seem to have slowed
> > > > down a bit.
> > > >
> > > > - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> > > > material, please tell me.
> > > >
> > >
> > > Two points:
> > >
> > > - I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.
> >
> > Mine too. Details sent in another message...
> >
>
> Does i8042.nopnp help?
Dmitry, Yes it works fine with this kernel parm. I run with hotplug on and udev off.
Andrew, 11-bk is also fine (without the parm).
Thanks
Ed Tomlinson
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 23:40 ` 2.6.11-rc4-mm1 Dmitry Torokhov
2005-02-24 0:20 ` 2.6.11-rc4-mm1 Ed Tomlinson
@ 2005-02-24 0:26 ` Fabian Fenaut
2005-02-25 0:06 ` 2.6.11-rc4-mm1 J.A. Magallon
2 siblings, 0 replies; 96+ messages in thread
From: Fabian Fenaut @ 2005-02-24 0:26 UTC (permalink / raw)
To: Dmitry Torokhov, Andrew Morton; +Cc: Ed Tomlinson, J.A. Magallon, linux-kernel
Dmitry Torokhov a ecrit le 24.02.2005 00:40:
> On Wednesday 23 February 2005 18:12, Ed Tomlinson wrote:
>
>> On Wednesday 23 February 2005 17:38, J.A. Magallon wrote:
>>
>>> On 02.23, Andrew Morton wrote:
>>>
>>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
>>>>
>>>> - Various fixes and updates all over the place. Things seem to
>>>> have slowed down a bit.
>>>>
>>>> - Last, final, ultimate call: if anyone has patches in here
>>>> which are 2.6.11 material, please tell me.
>>>
>>> Two points:
>>>
>>> - I lost my keyboard :(. USB, but plugged into PS/2 with an
>>> adapter.
>>
>> Mine too. Details sent in another message...
>
> Does i8042.nopnp help?
yes, keyboard is back
Andrew Morton a ecrit le 24.02.2005 00:25:
> Ed Tomlinson <tomlins@cam.org> wrote:
>
>> It does not seem to be finding the keyboard at all...
>
> Can you confirm that Linus's tree is OK? You'd best use the patch at
> http://www.kernel.org/pub/linux/kernel/v2.5/testing/cset/ to make
> sure you have the latest stuff.
2.6.11-rc4 +
http://www.kernel.org/pub/linux/kernel/v2.5/testing/cset/cset-20050223_2308.txt.gz
is indeed ok :
Feb 24 01:08:23 odie kernel: Kernel command line:
BOOT_IMAGE=2.6.11-rc4-ff ro root=305 hdd=ide-scsi
[...]
Feb 24 01:08:23 odie kernel: input: AT Translated Set 2 keyboard on
isa0060/serio0
Thank you,
Fabian
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 23:40 ` 2.6.11-rc4-mm1 Dmitry Torokhov
2005-02-24 0:20 ` 2.6.11-rc4-mm1 Ed Tomlinson
2005-02-24 0:26 ` 2.6.11-rc4-mm1 Fabian Fenaut
@ 2005-02-25 0:06 ` J.A. Magallon
2005-02-25 3:18 ` 2.6.11-rc4-mm1 Dmitry Torokhov
2 siblings, 1 reply; 96+ messages in thread
From: J.A. Magallon @ 2005-02-25 0:06 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: linux-kernel
On 02.24, Dmitry Torokhov wrote:
> On Wednesday 23 February 2005 18:12, Ed Tomlinson wrote:
> > On Wednesday 23 February 2005 17:38, J.A. Magallon wrote:
> > >
> > > On 02.23, Andrew Morton wrote:
> > > >
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
> > > >
> > > >
> > > > - Various fixes and updates all over the place. Things seem to have slowed
> > > > down a bit.
> > > >
> > > > - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> > > > material, please tell me.
> > > >
> > >
> > > Two points:
> > >
> > > - I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.
> >
> > Mine too. Details sent in another message...
> >
>
> Does i8042.nopnp help?
>
Yes, that makes things work.
Even better than ever before, now an USB mouse and a PS/2 logitech
trackball work fine both at the same time. In console and in X.
In previous kernels PS/2 was dead or jumped heavily when an usb mouse
was plugged. The keyboard works both in PS/2 (with adapter) and in USB.
Now a tricky question: the mouse and the trackball move the pointer in X
at different speeds. Is there any way to tell the kernel they have
the same DPI ? Or can I tweak the speed/DPI settings for them separately
to get a more or less similar movement ?
TIA
--
J.A. Magallon <jamagallon()able!es> \ Software is like sex:
werewolf!able!es \ It's better when it's free
Mandrakelinux release 10.2 (Cooker) for i586
Linux 2.6.10-jam11 (gcc 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-25 0:06 ` 2.6.11-rc4-mm1 J.A. Magallon
@ 2005-02-25 3:18 ` Dmitry Torokhov
0 siblings, 0 replies; 96+ messages in thread
From: Dmitry Torokhov @ 2005-02-25 3:18 UTC (permalink / raw)
To: J.A. Magallon; +Cc: linux-kernel
On Thursday 24 February 2005 19:06, J.A. Magallon wrote:
>
> On 02.24, Dmitry Torokhov wrote:
> > On Wednesday 23 February 2005 18:12, Ed Tomlinson wrote:
> > > On Wednesday 23 February 2005 17:38, J.A. Magallon wrote:
> > > >
> > > > On 02.23, Andrew Morton wrote:
> > > > >
> > > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
> > > > >
> > > > >
> > > > > - Various fixes and updates all over the place. Things seem to have slowed
> > > > > down a bit.
> > > > >
> > > > > - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> > > > > material, please tell me.
> > > > >
> > > >
> > > > Two points:
> > > >
> > > > - I lost my keyboard :(. USB, but plugged into PS/2 with an adapter.
> > >
> > > Mine too. Details sent in another message...
> > >
> >
> > Does i8042.nopnp help?
> >
>
> Yes, that makes things work.
> Even better than ever before, now an USB mouse and a PS/2 logitech
> trackball work fine both at the same time. In console and in X.
> In previous kernels PS/2 was dead or jumped heavily when an usb mouse
> was plugged. The keyboard works both in PS/2 (with adapter) and in USB.
>
> Now a tricky question: the mouse and the trackball move the pointer in X
> at different speeds. Is there any way to tell the kernel they have
> the same DPI ? Or can I tweak the speed/DPI settings for them separately
> to get a more or less similar movement ?
>
You can try changing PS/2 mouse rate and resolution via the following
sysfs attributes:
/sys/bus/serio/devices/serioX/rate
/sys/bus/serio/devices/serioX/resolution
like this:
echo -n "200" > /sys/bus/serio/devices/serio1/resolution
Or you could try setting both mice as separate devices in X...
--
Dmitry
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: 2.6.11-rc4-mm1
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (9 preceding siblings ...)
2005-02-23 22:38 ` 2.6.11-rc4-mm1 J.A. Magallon
@ 2005-02-23 23:07 ` Ed Tomlinson
2005-02-23 23:25 ` 2.6.11-rc4-mm1 Andrew Morton
2005-02-24 11:11 ` 2.6.11-rc4-mm1: infiniband/core/user_mad.c warning Adrian Bunk
` (5 subsequent siblings)
16 siblings, 1 reply; 96+ messages in thread
From: Ed Tomlinson @ 2005-02-23 23:07 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Wednesday 23 February 2005 04:42, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.11-rc4/2.6.11-rc4-mm1/
>
>
> - Various fixes and updates all over the place. Things seem to have slowed
> down a bit.
>
> - Last, final, ultimate call: if anyone has patches in here which are 2.6.11
> material, please tell me.
It boots fine here except that my keyboard is dead, rc3-mm2 is fine. The .config was built via
using rc3-mm2's config and make oldconfig. Looking it the boot log I see:
in rc3-mm2
Feb 23 17:49:20 grover kernel: Initializing Cryptographic API
Feb 23 17:49:20 grover kernel: Linux agpgart interface v0.101 (c) Dave Jones
Feb 23 17:49:20 grover kernel: [drm] Initialized drm 1.0.0 20040925
Feb 23 17:49:20 grover kernel: ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
Feb 23 17:49:20 grover kernel: ACPI: PS/2 Mouse Controller [PS2M] at irq 12
Feb 23 17:49:20 grover kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 23 17:49:20 grover kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 23 17:49:20 grover kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
in rc4-mm1
Feb 23 17:46:54 grover kernel: Initializing Cryptographic API
Feb 23 17:46:54 grover kernel: inotify device minor=63
Feb 23 17:46:54 grover kernel: Linux agpgart interface v0.101 (c) Dave Jones
Feb 23 17:46:54 grover kernel: [drm] Initialized drm 1.0.0 20040925
Feb 23 17:46:54 grover kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Feb 23 17:46:54 grover kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
It does not seem to be finding the keyboard at all...
Ideas?
Ed Tomlinson
diff -u ../11-3-2/.config .config
--- ../11-3-2/.config 2005-02-12 09:55:28.000000000 -0500
+++ .config 2005-02-23 07:10:53.000000000 -0500
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-mm2
-# Sat Feb 12 09:55:28 2005
+# Linux kernel version: 2.6.11-rc4-mm1
+# Wed Feb 23 07:10:53 2005
#
CONFIG_X86_64=y
CONFIG_64BIT=y
@@ -91,6 +91,7 @@
CONFIG_X86_MCE_INTEL=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
+CONFIG_SECCOMP=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@@ -119,6 +120,8 @@
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_IBM is not set
CONFIG_ACPI_TOSHIBA=m
+# CONFIG_ACPI_PCC is not set
+# CONFIG_ACPI_SONY is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
@@ -459,6 +462,7 @@
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -493,6 +497,7 @@
# CONFIG_SCSI_ATA_PIIX is not set
CONFIG_SCSI_SATA_NV=m
# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
@@ -543,6 +548,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -971,6 +978,11 @@
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
@@ -1263,6 +1275,8 @@
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
@@ -1293,6 +1307,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_INOTIFY=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
@@ -1370,6 +1385,7 @@
CONFIG_IB700_WDT=m
CONFIG_WAFER_WDT=m
CONFIG_I8XX_TCO=m
+# CONFIG_I6300ESB_WDT is not set
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_60XX_WDT=m
@@ -1444,6 +1460,11 @@
CONFIG_HANGCHECK_TIMER=m
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
CONFIG_I2C=m
@@ -1471,6 +1492,7 @@
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_ACB=m
@@ -1496,6 +1518,7 @@
CONFIG_SENSORS_FSCHER=m
# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=m
@@ -1509,6 +1532,7 @@
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
@@ -1682,6 +1706,10 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_CIRRUS=m
@@ -1695,6 +1723,7 @@
CONFIG_VIDEO_SELECT=y
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
+# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
@@ -1726,6 +1755,7 @@
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
+# CONFIG_FB_GEODE is not set
CONFIG_FB_VIRTUAL=m
#
@@ -2281,6 +2311,7 @@
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_PRINTK_TIME is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
^ permalink raw reply [flat|nested] 96+ messages in thread* 2.6.11-rc4-mm1: infiniband/core/user_mad.c warning
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (10 preceding siblings ...)
2005-02-23 23:07 ` 2.6.11-rc4-mm1 Ed Tomlinson
@ 2005-02-24 11:11 ` Adrian Bunk
2005-02-24 11:11 ` [-mm patch] drivers/md/dm-hw-handler.c: fix compile warnings Adrian Bunk
` (4 subsequent siblings)
16 siblings, 0 replies; 96+ messages in thread
From: Adrian Bunk @ 2005-02-24 11:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, roland, mshefty, halr, openib-general, greg
On Wed, Feb 23, 2005 at 01:42:33AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.11-rc3-mm1:
>...
> bk-driver-core-infiniband-build-fix.patch
>...
This gives me the following compile error:
<-- snip -->
...
CC drivers/infiniband/core/user_mad.o
drivers/infiniband/core/user_mad.c:587: warning: 'class_device_attr_dev' defined but not used
...
<-- snip -->
Reverting this patch fixes the warning (but I don't know about the
underlying issues).
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* [-mm patch] drivers/md/dm-hw-handler.c: fix compile warnings
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (11 preceding siblings ...)
2005-02-24 11:11 ` 2.6.11-rc4-mm1: infiniband/core/user_mad.c warning Adrian Bunk
@ 2005-02-24 11:11 ` Adrian Bunk
2005-02-24 21:51 ` [-mm patch] seccomp: don't say it was more or less mandatory Adrian Bunk
` (3 subsequent siblings)
16 siblings, 0 replies; 96+ messages in thread
From: Adrian Bunk @ 2005-02-24 11:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Wed, Feb 23, 2005 at 01:42:33AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.11-rc3-mm1:
>...
> +device-mapper-multipath-hardware-handler.patch
>...
> More DM updates
>...
This causes the following compile warnings:
<-- snip -->
...
CC drivers/md/dm-hw-handler.o
drivers/md/dm-hw-handler.c: In function `dm_scsi_err_handler':
drivers/md/dm-hw-handler.c:154: warning: unused variable `sense_key'
drivers/md/dm-hw-handler.c:154: warning: unused variable `asc'
drivers/md/dm-hw-handler.c:154: warning: unused variable `ascq'
...
<-- snip -->
Trivial fix:
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.11-rc4-mm1-full/drivers/md/dm-hw-handler.c.old 2005-02-24 01:59:45.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/md/dm-hw-handler.c 2005-02-24 02:00:05.000000000 +0100
@@ -151,9 +151,9 @@
unsigned dm_scsi_err_handler(struct hw_handler *hwh, struct bio *bio)
{
+#if 0
int sense_key, asc, ascq;
-#if 0
if (bio->bi_error & BIO_SENSE) {
/* FIXME: This is just an initial guess. */
/* key / asc / ascq */
^ permalink raw reply [flat|nested] 96+ messages in thread* [-mm patch] seccomp: don't say it was more or less mandatory
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (12 preceding siblings ...)
2005-02-24 11:11 ` [-mm patch] drivers/md/dm-hw-handler.c: fix compile warnings Adrian Bunk
@ 2005-02-24 21:51 ` Adrian Bunk
2005-02-24 22:41 ` Andrea Arcangeli
2005-02-26 11:31 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
` (2 subsequent siblings)
16 siblings, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-02-24 21:51 UTC (permalink / raw)
To: Andrew Morton, Andrea Arcangeli; +Cc: linux-kernel
seccomp might be a nice feature under some circumstances.
But the suggestion in the help text is IMHO too strong and therefore
removed by this patch.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.11-rc4-mm1-full/arch/i386/Kconfig.old 2005-02-24 22:47:32.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/arch/i386/Kconfig 2005-02-24 22:48:11.000000000 +0100
@@ -903,8 +903,6 @@
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
- If unsure, say Y. Only embedded should say N here.
-
source "drivers/perfctr/Kconfig"
config PHYSICAL_START
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-02-24 21:51 ` [-mm patch] seccomp: don't say it was more or less mandatory Adrian Bunk
@ 2005-02-24 22:41 ` Andrea Arcangeli
2005-02-25 21:14 ` Adrian Bunk
0 siblings, 1 reply; 96+ messages in thread
From: Andrea Arcangeli @ 2005-02-24 22:41 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
Hello Adrian,
On Thu, Feb 24, 2005 at 10:51:36PM +0100, Adrian Bunk wrote:
> seccomp might be a nice feature under some circumstances.
> But the suggestion in the help text is IMHO too strong and therefore
> removed by this patch.
Why too strong? The reason there is a config option is for the embedded
space, where clearly they want to compile into the kernel only the
strict features they use.
There are no risks in enabling seccomp and the size of the kernel image
won't change in any significant way either.
So I'd prefer to keep the "If unsure, say Y." and it seems appropriate
to me.
You have to say Y, if later on you want to sell your CPU resources with
Cpushare. BTW, you can already test it if you download version 0.8 of
the LGPL'd Cpushare software, it'll connect to the server and it'll
execute a remote seccomp computation and then it'll hang around until
you stop it with ./stop_cpushare.sh (and you will see your client
connected in the homepage stats). I didn't finish writing all the code
yet but it's already a decent demo for the seccomp part at least.
Anyway the help text is a minor detail after all. Thanks to everyone who
helped and provided feedback about the seccomp patch, especially to
Andrew. I'm very glad to see it in -mm right now!
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-02-24 22:41 ` Andrea Arcangeli
@ 2005-02-25 21:14 ` Adrian Bunk
2005-02-26 1:31 ` Andrea Arcangeli
0 siblings, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-02-25 21:14 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, linux-kernel
On Thu, Feb 24, 2005 at 11:41:34PM +0100, Andrea Arcangeli wrote:
> Hello Adrian,
Hi Andrea,
> On Thu, Feb 24, 2005 at 10:51:36PM +0100, Adrian Bunk wrote:
> > seccomp might be a nice feature under some circumstances.
> > But the suggestion in the help text is IMHO too strong and therefore
> > removed by this patch.
>
> Why too strong? The reason there is a config option is for the embedded
> space, where clearly they want to compile into the kernel only the
> strict features they use.
>
> There are no risks in enabling seccomp and the size of the kernel image
> won't change in any significant way either.
>
> So I'd prefer to keep the "If unsure, say Y." and it seems appropriate
> to me.
>
> You have to say Y, if later on you want to sell your CPU resources with
> Cpushare. BTW, you can already test it if you download version 0.8 of
> the LGPL'd Cpushare software, it'll connect to the server and it'll
> execute a remote seccomp computation and then it'll hang around until
> you stop it with ./stop_cpushare.sh (and you will see your client
> connected in the homepage stats). I didn't finish writing all the code
> yet but it's already a decent demo for the seccomp part at least.
>...
this sounds more like an "If unsure, say N.":
You don't need this feature unless you know you need it.
It's not about risk or the actual size of the code - there are many
small or big features in the kernel that might be useful under some
circumstances, but even the IPv6 help text still suggests to say N
to IPv6.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-02-25 21:14 ` Adrian Bunk
@ 2005-02-26 1:31 ` Andrea Arcangeli
2005-03-01 0:32 ` Adrian Bunk
0 siblings, 1 reply; 96+ messages in thread
From: Andrea Arcangeli @ 2005-02-26 1:31 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
On Fri, Feb 25, 2005 at 10:14:54PM +0100, Adrian Bunk wrote:
> You don't need this feature unless you know you need it.
But you may not know that you need it since in the help text I
intentionally didn't mention which software requires the option to be
set to Y (I didn't mention it, since I didn't want to use the kernel
configuration help text to get free advertisement, but OTOH if people is
unsure while they configure the kernel I certainly prefer that they set
it to Y ;).
> It's not about risk or the actual size of the code - there are many
> small or big features in the kernel that might be useful under some
> circumstances, but even the IPv6 help text still suggests to say N
> to IPv6.
IPV6 is some relevant amount of code and complexity, seccomp is only a
few bytes and very simple, it's not even a kbyte of ram that you're
paying if you enable it. Only embedded cares about bytes, and that's why
the option exists for embedded.
One thing I'm concerned about (more than the "Y" in the help text) is
that the distributions will enable the option in their binary kernel
images. I hope they will given it's only a matter of a few bytes.
Thanks.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-02-26 1:31 ` Andrea Arcangeli
@ 2005-03-01 0:32 ` Adrian Bunk
2005-03-01 0:44 ` Andrea Arcangeli
0 siblings, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-03-01 0:32 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, linux-kernel
On Sat, Feb 26, 2005 at 02:31:37AM +0100, Andrea Arcangeli wrote:
> On Fri, Feb 25, 2005 at 10:14:54PM +0100, Adrian Bunk wrote:
> > You don't need this feature unless you know you need it.
>
> But you may not know that you need it since in the help text I
> intentionally didn't mention which software requires the option to be
> set to Y (I didn't mention it, since I didn't want to use the kernel
> configuration help text to get free advertisement, but OTOH if people is
> unsure while they configure the kernel I certainly prefer that they set
> it to Y ;).
>...
If you want to use Cpushare, you know that you have to enable seccomp.
> Thanks.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-01 0:32 ` Adrian Bunk
@ 2005-03-01 0:44 ` Andrea Arcangeli
2005-03-03 14:51 ` Adrian Bunk
0 siblings, 1 reply; 96+ messages in thread
From: Andrea Arcangeli @ 2005-03-01 0:44 UTC (permalink / raw)
To: Adrian Bunk; +Cc: linux-kernel
On Tue, Mar 01, 2005 at 01:32:47AM +0100, Adrian Bunk wrote:
> If you want to use Cpushare, you know that you have to enable seccomp.
Oh yeah, I know it, you know it, but not everyone will know it while
configuring the kernel, infact I doubt they'll even know what Cpushare
is about while they configure the kernel ;). And I doubt they should be
required to know all those details in order to make that choice, and my
point is that seccomp is low overhead enough that everyone can enable it
if they're unsure, just in case. I'm just trying to explain why I
recommend it to Y by default "if unsure".
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-01 0:44 ` Andrea Arcangeli
@ 2005-03-03 14:51 ` Adrian Bunk
2005-03-03 16:24 ` Andrea Arcangeli
2005-03-03 21:55 ` Andrew Morton
0 siblings, 2 replies; 96+ messages in thread
From: Adrian Bunk @ 2005-03-03 14:51 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: linux-kernel
On Tue, Mar 01, 2005 at 01:44:49AM +0100, Andrea Arcangeli wrote:
> On Tue, Mar 01, 2005 at 01:32:47AM +0100, Adrian Bunk wrote:
> > If you want to use Cpushare, you know that you have to enable seccomp.
>
> Oh yeah, I know it, you know it, but not everyone will know it while
> configuring the kernel, infact I doubt they'll even know what Cpushare
> is about while they configure the kernel ;). And I doubt they should be
> required to know all those details in order to make that choice, and my
> point is that seccomp is low overhead enough that everyone can enable it
> if they're unsure, just in case. I'm just trying to explain why I
> recommend it to Y by default "if unsure".
My point is simply:
The help text for an option you need only under very specific
circumstances shouldn't sound as if this option was nearly was
mandatory.
For me, that's a question principle, not of risks of breakage or code
size.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-03 14:51 ` Adrian Bunk
@ 2005-03-03 16:24 ` Andrea Arcangeli
2005-03-03 21:55 ` Andrew Morton
1 sibling, 0 replies; 96+ messages in thread
From: Andrea Arcangeli @ 2005-03-03 16:24 UTC (permalink / raw)
To: Adrian Bunk; +Cc: linux-kernel
On Thu, Mar 03, 2005 at 03:51:47PM +0100, Adrian Bunk wrote:
> My point is simply:
>
> The help text for an option you need only under very specific
> circumstances shouldn't sound as if this option was nearly was
> mandatory.
>
> For me, that's a question principle, not of risks of breakage or code
> size.
My point is that the size of the linux desktop userbase is already small
compared to other OS userbase, and I don't want to fragment it even
further risking people to set it to N. People setting this to N is an
huge risk. If most people set it to N I'll be forced to switch to make
drastic plan changes right away. This is why I'd prefer to leave the Y
recommandation for now ;)
Or I'll make it a syscall, do the embedded folks have a compilation
option to disable the sys_sched_setaffinity syscalls and bytecode? No
they don't. By you your same argument we should add a
CONFIG_SCHED_AFFININITY and we shouldn't recommend it to Y.
This isn't a device driver, this is a linux kernel API that some app can
depend on, and you don't know for sure which app will depend on it. So
you should definitely say Y if unsure.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-03 14:51 ` Adrian Bunk
2005-03-03 16:24 ` Andrea Arcangeli
@ 2005-03-03 21:55 ` Andrew Morton
2005-03-15 10:09 ` Ingo Molnar
1 sibling, 1 reply; 96+ messages in thread
From: Andrew Morton @ 2005-03-03 21:55 UTC (permalink / raw)
To: Adrian Bunk; +Cc: andrea, linux-kernel
Adrian Bunk <bunk@stusta.de> wrote:
>
> My point is simply:
>
> The help text for an option you need only under very specific
> circumstances shouldn't sound as if this option was nearly was
> mandatory.
I think the sort of sell-your-cycles service which this patch enables is a
neat idea, and one which is worth supporting, especially as the kernel
patch is so tiny. So we want as many machines as possible to support it.
So people don't need a special kernel just to join in.
Others may disagree, although nobody has.
And the patch is tiny.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-03 21:55 ` Andrew Morton
@ 2005-03-15 10:09 ` Ingo Molnar
2005-03-15 10:15 ` Ingo Molnar
2005-03-15 11:27 ` Ingo Molnar
0 siblings, 2 replies; 96+ messages in thread
From: Ingo Molnar @ 2005-03-15 10:09 UTC (permalink / raw)
To: Andrew Morton; +Cc: Adrian Bunk, andrea, linux-kernel
* Andrew Morton <akpm@osdl.org> wrote:
> Adrian Bunk <bunk@stusta.de> wrote:
> >
> > My point is simply:
> >
> > The help text for an option you need only under very specific
> > circumstances shouldn't sound as if this option was nearly was
> > mandatory.
>
> I think the sort of sell-your-cycles service which this patch enables is a
> neat idea, and one which is worth supporting, especially as the kernel
> patch is so tiny. So we want as many machines as possible to support it.
> So people don't need a special kernel just to join in.
>
> Others may disagree, although nobody has.
>
> And the patch is tiny.
see my earlier counter-arguments in the thread starting at:
http://marc.theaimsgroup.com/?l=linux-kernel&m=110630922022462&w=2
end result of the thread: seccomp is completely unnecessary code-bloat
and can be equivalently implemented via ptrace. I cannot believe this
made it into -BK ...
Ingo
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 10:09 ` Ingo Molnar
@ 2005-03-15 10:15 ` Ingo Molnar
2005-03-15 11:27 ` Ingo Molnar
1 sibling, 0 replies; 96+ messages in thread
From: Ingo Molnar @ 2005-03-15 10:15 UTC (permalink / raw)
To: Andrew Morton; +Cc: Adrian Bunk, andrea, linux-kernel
we at a minimum need the patch below.
Ingo
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--- linux/arch/i386/Kconfig.orig
+++ linux/arch/i386/Kconfig
@@ -909,7 +909,6 @@ config REGPARM
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
- default y
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 10:09 ` Ingo Molnar
2005-03-15 10:15 ` Ingo Molnar
@ 2005-03-15 11:27 ` Ingo Molnar
2005-03-15 13:00 ` Andrea Arcangeli
1 sibling, 1 reply; 96+ messages in thread
From: Ingo Molnar @ 2005-03-15 11:27 UTC (permalink / raw)
To: Andrew Morton; +Cc: Adrian Bunk, andrea, linux-kernel, Linus Torvalds
* Ingo Molnar <mingo@elte.hu> wrote:
> see my earlier counter-arguments in the thread starting at:
>
> http://marc.theaimsgroup.com/?l=linux-kernel&m=110630922022462&w=2
>
> end result of the thread: seccomp is completely unnecessary code-bloat
> and can be equivalently implemented via ptrace. I cannot believe this
> made it into -BK ...
let me moderate my initial reaction somewhat:
the point i see in seccomp is that while it cannot be trusted right now
(not because of any known factor but simply because it doesnt have
enough review, yet), it might at a certain point (in many years) become
more trustable than TRACE_SYSCALLS.
It doesnt use a 'server' process to control syscall execution,
everything is enforced by the kernel. It is also intentionally simple,
and hence maybe even provably secure from a Comp-Sci POV. (assuming
sys_read()/sys_write() and hardware-irq processing itself is secure,
which quite likely wont be provable in the foreseeable future).
Also, while the technological arguments i raised in support of ptrace
are true, ptrace has a perception issue: it is perceived as insecure -
even if PTRACE_TRACE itself is not affected. And when building trust in
a processing platform, perception is just as important as raw security.
this combination of arguments i think tips the balance in favor of
seccomp, but still, i hate the fact that the anti-ptrace sentiment was
used as a vehicle to get this feature into the kernel.
technical comment: seccomp goes outside the audit/selinux framework,
which i believe is a bug. Andrea?
Ingo
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 11:27 ` Ingo Molnar
@ 2005-03-15 13:00 ` Andrea Arcangeli
2005-03-15 14:44 ` Ingo Molnar
2005-03-15 15:05 ` Ingo Molnar
0 siblings, 2 replies; 96+ messages in thread
From: Andrea Arcangeli @ 2005-03-15 13:00 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
On Tue, Mar 15, 2005 at 12:27:12PM +0100, Ingo Molnar wrote:
> this combination of arguments i think tips the balance in favor of
> seccomp, but still, i hate the fact that the anti-ptrace sentiment was
> used as a vehicle to get this feature into the kernel.
Why should I use excuses to get this feature into the kernel if this
wasn't the best way to reach my goal? Do you think I'm shooting myself
in the foot and that I'd be better off using ptrace?
One other reason of using seccomp that you didn't mention is how simple
it is for me to code everything using seccomp (and this also makes me
much more confortable about its security, regardless of ptrace). Seccomp
is an arch indipendent API, ptrace is not.
It's not just the security of ptrace that is less desiderable, but it's
also the API itself that is much less desiderable, since it's so
lowlevel.
> which quite likely wont be provable in the foreseeable future).
Please mention a _single_ bug that could allow you to escape the seccomp
jail in linux since 2.4.0 on x86 and x86-64 (and with escape I don't
mean sniffing data with mmx not being backwards compatible, or f00f DoS,
I mean executing code into the host as user nobody). I'm not aware of a
_single_ seccomp bug that could allow you to escape the seccomp jail
since 2.4.0 and probably much earlier.
Either you answer the above or you may want to stop spreading FUD about
seccomp (and in turn about Cpushare security).
You know that a seccomp security bug is guaranteed to be a _major_
security bug for linux at large, not just for Cpushare, so I don't see
why you claim it's not provable to be secure, since what you're really
saying is that it's not provable that Linux is secure in multiuser
environment.
Personally I'm very confortable that linux security is ok in
read/write/signal/exit syscalls/irqs. At least as far as the software is
concerned.
It's not like there was no auditing, since those code paths are the most
heavily executed and if people go search into mremap is not because they
wouldn't get any benefit in exploiting read(2) or write(2) instead of
mremap. They look into mremap because they didn't find anything
expoitable in read/write.
There have been positive comments from people about seccomp not just for
my private project, so perhaps it will be used by others too.
In large grid environments security is important too, not just for
Cpushare. In a large grid environment if one of those nodes is
compromised by one user during his computations, this user may see and
alter the results for the other computations of the other users and at
least Cpushare is designed to detect and react to those conditions since
the first place.
Infact once I add trusted computing to Cpushare, it might become more
secure and reliable than a supercomputer for rent that is missing the
trusted computing in the hardware.
> technical comment: seccomp goes outside the audit/selinux framework,
> which i believe is a bug. Andrea?
I intentionally left it out of audit/selinux. To the less dependencies
it has on other parts of the kernel and the simpler it is, the better
IMHO. Seccomp should be fixed in stone, people shouldn't go hack on it
every day.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 13:00 ` Andrea Arcangeli
@ 2005-03-15 14:44 ` Ingo Molnar
2005-03-15 14:59 ` Andrea Arcangeli
2005-03-15 15:05 ` Ingo Molnar
1 sibling, 1 reply; 96+ messages in thread
From: Ingo Molnar @ 2005-03-15 14:44 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
* Andrea Arcangeli <andrea@cpushare.com> wrote:
> > technical comment: seccomp goes outside the audit/selinux framework,
> > which i believe is a bug. Andrea?
>
> I intentionally left it out of audit/selinux. To the less dependencies
> it has on other parts of the kernel and the simpler it is, the better
> IMHO. Seccomp should be fixed in stone, people shouldn't go hack on it
> every day.
let me put it another way: this is a security hole. seccomp is now a way
to evade the auditing of read/write syscalls done to an opened file.
Please fix this.
Ingo
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 14:44 ` Ingo Molnar
@ 2005-03-15 14:59 ` Andrea Arcangeli
2005-03-15 15:00 ` Ingo Molnar
0 siblings, 1 reply; 96+ messages in thread
From: Andrea Arcangeli @ 2005-03-15 14:59 UTC (permalink / raw)
To: Ingo Molnar
Cc: Andrea Arcangeli, Andrew Morton, Adrian Bunk, linux-kernel,
Linus Torvalds
On Tue, Mar 15, 2005 at 03:44:28PM +0100, Ingo Molnar wrote:
> let me put it another way: this is a security hole. seccomp is now a way
> to evade the auditing of read/write syscalls done to an opened file.
> Please fix this.
This is not true, the auditing of read/write will work fine on the
seccomp task too. I guess you overlooked something in the code.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 14:59 ` Andrea Arcangeli
@ 2005-03-15 15:00 ` Ingo Molnar
0 siblings, 0 replies; 96+ messages in thread
From: Ingo Molnar @ 2005-03-15 15:00 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
* Andrea Arcangeli <andrea@cpushare.com> wrote:
> This is not true, the auditing of read/write will work fine on the
> seccomp task too. I guess you overlooked something in the code.
yeah, you are right - it's there. You are driving seccomp off
do_syscall_trace(), which does audit_syscall_entry().
Ingo
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 13:00 ` Andrea Arcangeli
2005-03-15 14:44 ` Ingo Molnar
@ 2005-03-15 15:05 ` Ingo Molnar
2005-03-15 16:44 ` Andrea Arcangeli
1 sibling, 1 reply; 96+ messages in thread
From: Ingo Molnar @ 2005-03-15 15:05 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
* Andrea Arcangeli <andrea@cpushare.com> wrote:
> > which quite likely wont be provable in the foreseeable future).
>
> Please mention a _single_ bug that could allow you to escape the
> seccomp jail in linux since 2.4.0 on x86 and x86-64 (and with escape I
> don't mean sniffing data with mmx not being backwards compatible, or
> f00f DoS, I mean executing code into the host as user nobody). I'm not
> aware of a _single_ seccomp bug that could allow you to escape the
> seccomp jail since 2.4.0 and probably much earlier.
ugh? Where do i claim any such thing?
while we are at it, please mention a single ptrace bug in the same
timeframe that could allow a bytecode 'client' to escape a ptrace
TRACE_SYSCALL jail at will.
Ingo
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 15:05 ` Ingo Molnar
@ 2005-03-15 16:44 ` Andrea Arcangeli
2005-03-16 8:28 ` Ingo Molnar
0 siblings, 1 reply; 96+ messages in thread
From: Andrea Arcangeli @ 2005-03-15 16:44 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
Oe Tue, Mar 15, 2005 at 04:05:26PM +0100, Ingo Molnar wrote:
> ugh? Where do i claim any such thing?
You never said such a thing, but you said you believe it's not provable
that sys_read/write and hardware irq processing is secure in linux, so
I wanted to get some statistical significance about your claim from you
just in case I was missing something. I obviously can't have in memory
every single bug since 2.4.0.
> while we are at it, please mention a single ptrace bug in the same
> timeframe that could allow a bytecode 'client' to escape a ptrace
> TRACE_SYSCALL jail at will.
There was this bug around 2.4.10, IIRC a SIGCONT could let the ptraced
task to continue executing. I don't want to depend on other applications
not to send a signal by mistake to the ptraced task.
http://www.ussg.iu.edu/hypermail/linux/kernel/0109.0/1049.html
An oom killer triggering by mistake on a strace -p would have been
enough too. You said if the ptracer is the group leader then the ptraced
task will be killed at the same time, but I doubt many apps depends on
this to be safe, that code is complex and it may break over time during
development if signal handling changes or if the exit code changes.
The interesting point is that no app out there (except uml) becomes
exploitable if you find some hole in TRACE_SYSCALL (at worse strace will
screwup a bit). I don't think an huge amount of research has been done
in those code paths (unlike it happened in mremap and many other kernel
APIs). So even if there are bugs in ptrace they might not being
considered security related. And UML has no other way than to use ptrace
since it needs much more of what I need and UML cannot be arch
indipendent.
While any seccomp security bug is guaranteed to be a major security
linux bug too, so I'm more confortable that more research has been done
in those core code paths than in TRACE_SYSCALL behaviour.
This below is all the code I had to write to secure the remote bytecode
with seccomp, and it's fully arch indipendent (licence is LGPL). Ok,
the seccomp kernel patch is 500 lines, so we should add 500 lines plus
the below ~50 total ~550 lines, but the end result is much nicer and
more secure IMHO. Plus this is simple enough that perhaps Cpushare won't
be the only project using it.
class seccomp_protocol_class(protocol.ProcessProtocol):
def __init__(self, seccomp, d_start, d_end):
self.seccomp = seccomp
self.d_start, self.d_end = d_start, d_end
self.outReceived = self.enable_seccomp_mode
def connectionMade(self):
self.seccomp.cpushare_protocol.seccomp_protocols.append(self)
self.seccomp.cpushare_protocol.transport.registerProducer(self, 1)
self.transport.closeChildFD(2) # close stderr right away
self.transport.writeToChild(0, self.seccomp.header + self.seccomp.text_data)
def enable_seccomp_mode(self, data):
assert data == MAGIC_ASK_SECCOMP, "didn't ask seccomp"
seccomp_file = '/proc/' + str(self.transport.pid) + '/seccomp'
if file(seccomp_file, 'r').read(1) != '0':
raise 'seccomp already enabled?'
file(seccomp_file, 'w').write('1')
if file(seccomp_file, 'r').read(1) != '1':
assert self.transport.pid is not None
print 'Killing the seccomp-loader before it starts the untrusted bytecode'
self.sigkill()
raise 'seccomp enable failure'
self.outReceived = self.send_to_server
self.transport.writeToChild(0, MAGIC_GOT_SECCOMP)
self.d_start.callback(None) # now the buyer is connected
def send_to_server(self, data):
self.seccomp.cpushare_protocol.sendString(PROTO_SECCOMP_FORWARD + data)
def recv_from_server(self, data):
self.transport.writeToChild(0, data)
def errReceived(self, data):
raise "shouldn't happen"
def processEnded(self, status):
self.seccomp.cpushare_protocol.seccomp_protocols.remove(self)
self.seccomp.cpushare_protocol.transport.unregisterProducer()
if status.value.exitCode or status.value.signal:
if status.value.exitCode == 4:
print 'Failure in setting the stack size to %d bytes.' % self.seccomp.stack
if status.value.signal == signal.SIGKILL:
print 'Seccomp task gracefully killed by seccomp.'
elif status.value.signal == signal.SIGSEGV:
print 'Seccomp task gracefully killed by sigsegv.'
elif status.value.signal == signal.SIGQUIT:
print 'Seccomp task killed by sigquit - should never happen.'
self.d_end.errback(status)
else:
print 'Seccomp task completed successfully.'
self.d_end.callback(None)
def sigquit(self):
if self.transport.pid is not None:
os.kill(self.transport.pid, signal.SIGQUIT)
def sigkill(self):
if self.transport.pid is not None:
os.kill(self.transport.pid, signal.SIGKILL)
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-15 16:44 ` Andrea Arcangeli
@ 2005-03-16 8:28 ` Ingo Molnar
2005-03-16 10:46 ` Andrea Arcangeli
0 siblings, 1 reply; 96+ messages in thread
From: Ingo Molnar @ 2005-03-16 8:28 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
* Andrea Arcangeli <andrea@cpushare.com> wrote:
> Oe Tue, Mar 15, 2005 at 04:05:26PM +0100, Ingo Molnar wrote:
> > ugh? Where do i claim any such thing?
>
> You never said such a thing, but you said you believe it's not
> provable that sys_read/write and hardware irq processing is secure in
> linux, so I wanted to get some statistical significance about your
> claim from you just in case I was missing something. I obviously
> can't have in memory every single bug since 2.4.0.
in fact, we had bugs on x86 where if userspace set up a specific value
for %ebx the kernel would crash, because the irq entry code was
incorrect. (this might even have been exploitable) So yes, if seccomp
would be backported to that kernel, seccomp would be vulnerable too.
but this is not what i meant, what i meant was this:
> > [...] It is also intentionally simple,
> > and hence maybe even provably secure from a Comp-Sci POV.
> > (assuming sys_read()/sys_write() and hardware-irq processing itself
> > is secure, which quite likely wont be provable in the foreseeable
> > future).
'provable' here means provable mathematically, as done in computer
science. Not 'provable via good track record'. So what i said was in
fact a compliment towards seccomp: i believe that as long as we assume
certain external mechanisms (the whole hardware environment, and all
irq/rest-of-kernel and read/write mechanisms) to be secure, the basic
seccomp code itself (those 100-200 lines of code), _may_ be provably
secure, mathematically. That would be a nice thing to have.
obviously the irq and sys_read/sys_write code is way too complex to be
mathematically provable in the near future.
> > while we are at it, please mention a single ptrace bug in the same
> > timeframe that could allow a bytecode 'client' to escape a ptrace
> > TRACE_SYSCALL jail at will.
>
> There was this bug around 2.4.10, IIRC a SIGCONT could let the ptraced
> task to continue executing. I don't want to depend on other
> applications not to send a signal by mistake to the ptraced task.
sorry, but if an attacker can cause arbitrary signals to be sent to your
secure application (and the signals pass the security checks!) then you
have much bigger problems!
this is what i feel is unfair: you are (unintentionally, i presume)
mixing the security of the 'totality of ptrace APIs' with the security
model that 'untrusted bytecode' is in.
> The interesting point is that no app out there (except uml) becomes
> exploitable if you find some hole in TRACE_SYSCALL (at worse strace
> will screwup a bit). I don't think an huge amount of research has been
> done in those code paths (unlike it happened in mremap and many other
> kernel APIs). [...]
so your solution is to introduce a whole new API that duplicates much of
what ptrace can already do, with just about the same amount of risk? So
your solution is to leave UML out in the cold (and thus increasing risks
altogether), by having a crippled mechanism that UML could never use?
That i call a selfish NIH syndrome, not a security accomplishment.
but, i dont mind your code being in the kernel, for the reasons i
stated, as long as the anti-ptrace fallacy is clearly understood. So you
might have partly succeeded in social engineering your security feature
into the kernel (feel the irony?), but i'm trying to counter what i
believe to be false premises. Ptrace has its fundamental security
problems, but PTRACE_TRACE is not nearly as bad and should not be
confused with the kernel holes caused by other, security-independent
ptrace debug mechanisms.
Ingo
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-16 8:28 ` Ingo Molnar
@ 2005-03-16 10:46 ` Andrea Arcangeli
2005-03-16 13:41 ` Ingo Molnar
0 siblings, 1 reply; 96+ messages in thread
From: Andrea Arcangeli @ 2005-03-16 10:46 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
On Wed, Mar 16, 2005 at 09:28:51AM +0100, Ingo Molnar wrote:
> in fact, we had bugs on x86 where if userspace set up a specific value
> for %ebx the kernel would crash, because the irq entry code was
> incorrect. (this might even have been exploitable) So yes, if seccomp
> would be backported to that kernel, seccomp would be vulnerable too.
You said "might have been", so you should as well say "might be
vulnerable" too. Either you go check and you prove it exploitable or you
cannot say it would be vulnerable.
I've never heard of this %ebx bug that could be exploitable from my part.
I'm aware of several DoS but they're not really a problem since they can
even be autodetected.
> 'provable' here means provable mathematically, as done in computer
> science. Not 'provable via good track record'. So what i said was in
> fact a compliment towards seccomp: i believe that as long as we assume
> certain external mechanisms (the whole hardware environment, and all
> irq/rest-of-kernel and read/write mechanisms) to be secure, the basic
> seccomp code itself (those 100-200 lines of code), _may_ be provably
> secure, mathematically. That would be a nice thing to have.
The hardware is not provable mathematically anyway, javascript is not
provable mathematically anyway, JVM security for java applets is not
provable mathematically anyway, jpeg decompression is not provable
methematically anyway, gzip decompression is not provable mathematically
anyway, a mail client decoding mime attachments is not provable
mathematically anyway, the ip_conntrack code of the firewall is not
provable anwyay, the ipsec stack is not math provable anyway, the
compiler that compiled the source is not provale mathematically anyway,
the tcp/ip stack is not provable mathematically anyway, I can go on
forever.
The thing I care about is that seccomp is much more provable than the
above and more provable than ptrace as well. Go ahead and disagree with
this bold statement if you can.
> obviously the irq and sys_read/sys_write code is way too complex to be
> mathematically provable in the near future.
Math provable is irrelevant with real software world since nobody has
enough resources to demonstrate math correctness.
The only places where they truly do the math-provable thing is for the
software avoding airplane mid air collisions or problems with a very
limited scope, where it's simple enough that it's actually possible to
prove it (i.e. obviously no real OS like linux, no paging and perhaps
simpler compiler as well).
> sorry, but if an attacker can cause arbitrary signals to be sent to your
> secure application (and the signals pass the security checks!) then you
> have much bigger problems!
It's not the attacker that sends the signal! It's a buggy application
coming from the CDs, like a videogame hitting a bug.
Like kill(-1, SIGCONT) because the fork failed and for some reason the
pid was set to -1.
> this is what i feel is unfair: you are (unintentionally, i presume)
> mixing the security of the 'totality of ptrace APIs' with the security
> model that 'untrusted bytecode' is in.
What I want is a model that guarantees me that nothing from userland can
ever un-release the bytecode so that it becomes free to execute in the
system.
After I enable seccomp on the bytecode there's nothing that the user can
do to un-seccomp the task (unless it changes the right bit in /dev/mem,
but that can't be an accident unlike the kill(-1, SIGCONT)!).
This is not possible to achieve with ptrace.
> but, i dont mind your code being in the kernel, for the reasons i
> stated, as long as the anti-ptrace fallacy is clearly understood. So you
> might have partly succeeded in social engineering your security feature
> into the kernel (feel the irony?), but i'm trying to counter what i
> believe to be false premises. Ptrace has its fundamental security
> problems, but PTRACE_TRACE is not nearly as bad and should not be
> confused with the kernel holes caused by other, security-independent
> ptrace debug mechanisms.
You're the one that wants to prove mathematically the code. So you
should be aware that the more code that is involved, the harder it is to
prove it mathematically safe. In real life math provable won't be doable
in our lifetime, but still the auditing of the code will be more
reliable the shorter the code is. All I did with seccomp is to reduce
the amount of code that you want to prove mathematically. Spending any
time to prove mathematically ptrace (or more realistically audit it)
when somebody can change it at anytime would not be a good idea (for the
other parts like read/write/pipe I can't avoid to re-audit, but ptrace
I can definitely avoid to re-audit thanks to seccomp). Plus as shown,
the API is an order of magnitude simpler to use and it's arch
indipendent unlike ptrace, so perhaps I won't be the only one using it,
and non-kernel developers may actually be able to use it too to do
decompression and similar stuff.
If you can't see any benefit for my project in using in seccomp instead
ptrace that's your problem because there are several tangible benefits
that I already mentioned several times. So I'm not answering further
emails to avoid repeating the same things over and over again.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-16 10:46 ` Andrea Arcangeli
@ 2005-03-16 13:41 ` Ingo Molnar
2005-03-16 17:28 ` Andrea Arcangeli
0 siblings, 1 reply; 96+ messages in thread
From: Ingo Molnar @ 2005-03-16 13:41 UTC (permalink / raw)
To: Andrea Arcangeli; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
* Andrea Arcangeli <andrea@cpushare.com> wrote:
> > obviously the irq and sys_read/sys_write code is way too complex to be
> > mathematically provable in the near future.
>
> Math provable is irrelevant with real software world since nobody has
> enough resources to demonstrate math correctness.
(this is becoming tangential, but i'd not be as brave to suggest that
formal provability of real software is irrelevant. It's not feasible
today and probably not feasible in the near future. What tomorrow brings
we cannot know.)
> > sorry, but if an attacker can cause arbitrary signals to be sent to your
> > secure application (and the signals pass the security checks!) then you
> > have much bigger problems!
>
> It's not the attacker that sends the signal! It's a buggy application
> coming from the CDs, like a videogame hitting a bug.
well, for an attack to become possible, it's the attacker that has to be
able to trigger it. By your logic i could say: 'many people use empty
passwords for root, so it could easily happen that a seccomp box gets
compromised that way'. The fact that sending SIGCONT to the seccomp
application _seems_ to be more related to the security of the ptrace
solution does not make it any more relevant in reality than the root
password issue. (But i guess after many years i should be wiser not to
get into such arguments with you.) And i've yet to see applications
sending spurious SIGCONT's to each other 'by accident'.
OTOH, i accept your point that a 'no way back' kernel-enforced kind of
sandbox (which seccomp provides and ptrace doesnt) is a useful concept.
Ingo
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [-mm patch] seccomp: don't say it was more or less mandatory
2005-03-16 13:41 ` Ingo Molnar
@ 2005-03-16 17:28 ` Andrea Arcangeli
2005-03-17 10:27 ` Ingo Molnar
0 siblings, 1 reply; 96+ messages in thread
From: Andrea Arcangeli @ 2005-03-16 17:28 UTC (permalink / raw)
To: Ingo Molnar; +Cc: Andrew Morton, Adrian Bunk, linux-kernel, Linus Torvalds
On Wed, Mar 16, 2005 at 02:41:50PM +0100, Ingo Molnar wrote:
> password issue. (But i guess after many years i should be wiser not to
> get into such arguments with you.) [..]
Your last emails about math proofs, social engineering and selfish NIH
syndrome were ridiculous, and now you get personal.
After all those emails I never heard a good argument from you that made
me even slightly consider changing my plans and to use ptrace instead of
seccomp, and at the end you are degenerating, so I'll have to take it as
a contrarian indicator.
Drop seccomp from the RH kernels if that makes you feel better. You can
always patch the Cpushare client to use ptrace instead of seccomp if you
want. Put your code where your mouth is, the config option is there,
keep it to N.
^ permalink raw reply [flat|nested] 96+ messages in thread
* [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (13 preceding siblings ...)
2005-02-24 21:51 ` [-mm patch] seccomp: don't say it was more or less mandatory Adrian Bunk
@ 2005-02-26 11:31 ` Adrian Bunk
2005-03-02 6:43 ` Jeff Garzik
2005-02-27 15:48 ` [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups Adrian Bunk
2005-02-28 18:07 ` [-mm patch] drivers/scsi/ch.c: make a struct static Adrian Bunk
16 siblings, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-02-26 11:31 UTC (permalink / raw)
To: Andrew Morton, netdev, jgarzik; +Cc: linux-kernel
On Wed, Feb 23, 2005 at 01:42:33AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.11-rc3-mm1:
>...
> bk-netdev.patch
>...
Some of the options that needlessly wrote in their help text which
options they do selct (patch already sent) didn't obey the most
important rule of select
If you select something, you have to ensure that the dependencies
of what you do select are fulfilled.
resulting in the following compile error:
<-- snip -->
...
LD .tmp_vmlinux1
crypto/built-in.o(.init.text+0x31b): In function `aes_init':
: undefined reference to `crypto_register_alg'
crypto/built-in.o(.init.text+0x326): In function `michael_mic_init':
: undefined reference to `crypto_register_alg'
crypto/built-in.o(.exit.text+0x6): In function `aes_fini':
: undefined reference to `crypto_unregister_alg'
crypto/built-in.o(.exit.text+0x16): In function `michael_mic_exit':
: undefined reference to `crypto_unregister_alg'
net/built-in.o(.text+0x5ba52): In function `ieee80211_ccmp_init':
: undefined reference to `crypto_alloc_tfm'
net/built-in.o(.text+0x5ba94): In function `ieee80211_ccmp_init':
: undefined reference to `crypto_free_tfm'
net/built-in.o(.text+0x5bab7): In function `ieee80211_ccmp_deinit':
: undefined reference to `crypto_free_tfm'
net/built-in.o(.text+0x5c5c2): In function `ieee80211_tkip_init':
: undefined reference to `crypto_alloc_tfm'
net/built-in.o(.text+0x5c5d5): In function `ieee80211_tkip_init':
: undefined reference to `crypto_alloc_tfm'
net/built-in.o(.text+0x5c623): In function `ieee80211_tkip_init':
: undefined reference to `crypto_free_tfm'
net/built-in.o(.text+0x5c62a): In function `ieee80211_tkip_init':
: undefined reference to `crypto_free_tfm'
net/built-in.o(.text+0x5c65e): In function `ieee80211_tkip_deinit':
: undefined reference to `crypto_free_tfm'
net/built-in.o(.text+0x5c665): In function `ieee80211_tkip_deinit':
: undefined reference to `crypto_free_tfm'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
This patch adds the missing selects of CRYPTO.
--- linux-2.6.11-rc4-mm1-full/net/ieee80211/Kconfig.old 2005-02-26 12:12:44.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/net/ieee80211/Kconfig 2005-02-26 12:13:47.000000000 +0100
@@ -42,10 +42,11 @@
"ieee80211_crypt_wep".
config IEEE80211_CRYPT_CCMP
tristate "IEEE 802.11i CCMP support"
depends on IEEE80211
+ select CRYPTO
select CRYPTO_AES
---help---
Include software based cipher suites in support of IEEE 802.11i
(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
networks.
@@ -54,10 +55,11 @@
"ieee80211_crypt_ccmp".
config IEEE80211_CRYPT_TKIP
tristate "IEEE 802.11i TKIP encryption"
depends on IEEE80211
+ select CRYPTO
select CRYPTO_MICHAEL_MIC
---help---
Include software based cipher suites in support of IEEE 802.11i
(aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled
networks.
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-02-26 11:31 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
@ 2005-03-02 6:43 ` Jeff Garzik
2005-03-02 14:08 ` Adrian Bunk
0 siblings, 1 reply; 96+ messages in thread
From: Jeff Garzik @ 2005-03-02 6:43 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, netdev, linux-kernel
Adrian Bunk wrote:
> + select CRYPTO
> select CRYPTO_AES
> ---help---
> Include software based cipher suites in support of IEEE 802.11i
> (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
> networks.
> @@ -54,10 +55,11 @@
> "ieee80211_crypt_ccmp".
>
> config IEEE80211_CRYPT_TKIP
> tristate "IEEE 802.11i TKIP encryption"
> depends on IEEE80211
> + select CRYPTO
> select CRYPTO_MICHAEL_MIC
'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.
Jeff
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 6:43 ` Jeff Garzik
@ 2005-03-02 14:08 ` Adrian Bunk
2005-03-02 19:12 ` Jeff Garzik
0 siblings, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-03-02 14:08 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Andrew Morton, netdev, linux-kernel
On Wed, Mar 02, 2005 at 01:43:04AM -0500, Jeff Garzik wrote:
> Adrian Bunk wrote:
> >+ select CRYPTO
> > select CRYPTO_AES
> > ---help---
> > Include software based cipher suites in support of IEEE 802.11i
> > (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
> > networks.
> >@@ -54,10 +55,11 @@
> > "ieee80211_crypt_ccmp".
> >
> > config IEEE80211_CRYPT_TKIP
> > tristate "IEEE 802.11i TKIP encryption"
> > depends on IEEE80211
> >+ select CRYPTO
> > select CRYPTO_MICHAEL_MIC
>
>
> 'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.
This would result in a recursive dependency.
> Jeff
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 14:08 ` Adrian Bunk
@ 2005-03-02 19:12 ` Jeff Garzik
2005-03-02 20:38 ` Andrew Morton
2005-03-02 21:59 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
0 siblings, 2 replies; 96+ messages in thread
From: Jeff Garzik @ 2005-03-02 19:12 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, netdev, linux-kernel
Adrian Bunk wrote:
> On Wed, Mar 02, 2005 at 01:43:04AM -0500, Jeff Garzik wrote:
>
>>Adrian Bunk wrote:
>>
>>>+ select CRYPTO
>>> select CRYPTO_AES
>>> ---help---
>>> Include software based cipher suites in support of IEEE 802.11i
>>> (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
>>> networks.
>>>@@ -54,10 +55,11 @@
>>> "ieee80211_crypt_ccmp".
>>>
>>>config IEEE80211_CRYPT_TKIP
>>> tristate "IEEE 802.11i TKIP encryption"
>>> depends on IEEE80211
>>>+ select CRYPTO
>>> select CRYPTO_MICHAEL_MIC
>>
>>
>>'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.
>
>
> This would result in a recursive dependency.
No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.
Jeff
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 19:12 ` Jeff Garzik
@ 2005-03-02 20:38 ` Andrew Morton
2005-03-02 21:07 ` Jeff Garzik
2005-03-02 21:59 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
1 sibling, 1 reply; 96+ messages in thread
From: Andrew Morton @ 2005-03-02 20:38 UTC (permalink / raw)
To: Jeff Garzik; +Cc: bunk, netdev, linux-kernel
Jeff Garzik <jgarzik@pobox.com> wrote:
>
> Adrian Bunk wrote:
> > On Wed, Mar 02, 2005 at 01:43:04AM -0500, Jeff Garzik wrote:
> >
> >>Adrian Bunk wrote:
> >>
> >>>+ select CRYPTO
> >>> select CRYPTO_AES
> >>> ---help---
> >>> Include software based cipher suites in support of IEEE 802.11i
> >>> (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
> >>> networks.
> >>>@@ -54,10 +55,11 @@
> >>> "ieee80211_crypt_ccmp".
> >>>
> >>>config IEEE80211_CRYPT_TKIP
> >>> tristate "IEEE 802.11i TKIP encryption"
> >>> depends on IEEE80211
> >>>+ select CRYPTO
> >>> select CRYPTO_MICHAEL_MIC
> >>
> >>
> >>'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.
> >
> >
> > This would result in a recursive dependency.
>
> No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.
>
Thing is, CRYPTO_AES on only selectable on x86.
So really, IEEE80211_CRYPT_CCMP should depend upon CRYPTO_AES rather than
selecting it. But that confuses users.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 20:38 ` Andrew Morton
@ 2005-03-02 21:07 ` Jeff Garzik
2005-03-02 21:18 ` Andrew Morton
0 siblings, 1 reply; 96+ messages in thread
From: Jeff Garzik @ 2005-03-02 21:07 UTC (permalink / raw)
To: Andrew Morton; +Cc: bunk, netdev, linux-kernel
Andrew Morton wrote:
> Jeff Garzik <jgarzik@pobox.com> wrote:
>
>>Adrian Bunk wrote:
>>
>>>On Wed, Mar 02, 2005 at 01:43:04AM -0500, Jeff Garzik wrote:
>>>
>>>
>>>>Adrian Bunk wrote:
>>>>
>>>>
>>>>>+ select CRYPTO
>>>>> select CRYPTO_AES
>>>>> ---help---
>>>>> Include software based cipher suites in support of IEEE 802.11i
>>>>> (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
>>>>> networks.
>>>>>@@ -54,10 +55,11 @@
>>>>> "ieee80211_crypt_ccmp".
>>>>>
>>>>>config IEEE80211_CRYPT_TKIP
>>>>> tristate "IEEE 802.11i TKIP encryption"
>>>>> depends on IEEE80211
>>>>>+ select CRYPTO
>>>>> select CRYPTO_MICHAEL_MIC
>>>>
>>>>
>>>>'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.
>>>
>>>
>>>This would result in a recursive dependency.
>>
>>No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.
>>
>
>
> Thing is, CRYPTO_AES on only selectable on x86.
You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig,
the dependencies are a bit weird:
config CRYPTO_AES
tristate "AES cipher algorithms"
depends on CRYPTO && !(X86 && !X86_64)
config CRYPTO_AES_586
tristate "AES cipher algorithms (i586)"
depends on CRYPTO && (X86 && !X86_64)
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 21:07 ` Jeff Garzik
@ 2005-03-02 21:18 ` Andrew Morton
2005-03-02 21:56 ` Adrian Bunk
2005-03-02 22:41 ` Jeff Garzik
0 siblings, 2 replies; 96+ messages in thread
From: Andrew Morton @ 2005-03-02 21:18 UTC (permalink / raw)
To: Jeff Garzik; +Cc: bunk, netdev, linux-kernel
Jeff Garzik <jgarzik@pobox.com> wrote:
>
> > Thing is, CRYPTO_AES on only selectable on x86.
>
> You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig,
> the dependencies are a bit weird:
>
> config CRYPTO_AES
> tristate "AES cipher algorithms"
> depends on CRYPTO && !(X86 && !X86_64)
> config CRYPTO_AES_586
> tristate "AES cipher algorithms (i586)"
> depends on CRYPTO && (X86 && !X86_64)
That's pretty broken, isn't it?
Would be better to just do:
config CRYPTO_AES
select CRYPTO_AES_586 if (X86 && !X86_64)
select CRYPTO_AES_OTHER if !(X86 && !X86_64)
and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 21:18 ` Andrew Morton
@ 2005-03-02 21:56 ` Adrian Bunk
2005-03-02 22:14 ` Andrew Morton
2005-03-02 22:41 ` Jeff Garzik
1 sibling, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-03-02 21:56 UTC (permalink / raw)
To: Andrew Morton; +Cc: Jeff Garzik, netdev, linux-kernel
On Wed, Mar 02, 2005 at 01:18:17PM -0800, Andrew Morton wrote:
> Jeff Garzik <jgarzik@pobox.com> wrote:
> >
> > > Thing is, CRYPTO_AES on only selectable on x86.
> >
> > You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig,
> > the dependencies are a bit weird:
> >
> > config CRYPTO_AES
> > tristate "AES cipher algorithms"
> > depends on CRYPTO && !(X86 && !X86_64)
> > config CRYPTO_AES_586
> > tristate "AES cipher algorithms (i586)"
> > depends on CRYPTO && (X86 && !X86_64)
>
> That's pretty broken, isn't it?
>
> Would be better to just do:
>
> config CRYPTO_AES
> select CRYPTO_AES_586 if (X86 && !X86_64)
> select CRYPTO_AES_OTHER if !(X86 && !X86_64)
>
> and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.
http://www.ussg.iu.edu/hypermail/linux/kernel/0502.3/0518.html
http://www.ussg.iu.edu/hypermail/linux/kernel/0502.3/0523.html
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 21:18 ` Andrew Morton
2005-03-02 21:56 ` Adrian Bunk
@ 2005-03-02 22:41 ` Jeff Garzik
2005-03-02 22:45 ` Adrian Bunk
1 sibling, 1 reply; 96+ messages in thread
From: Jeff Garzik @ 2005-03-02 22:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: bunk, netdev, linux-kernel
Andrew Morton wrote:
> Jeff Garzik <jgarzik@pobox.com> wrote:
>
>>>Thing is, CRYPTO_AES on only selectable on x86.
>>
>> You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig,
>> the dependencies are a bit weird:
>>
>> config CRYPTO_AES
>> tristate "AES cipher algorithms"
>> depends on CRYPTO && !(X86 && !X86_64)
>> config CRYPTO_AES_586
>> tristate "AES cipher algorithms (i586)"
>> depends on CRYPTO && (X86 && !X86_64)
>
>
> That's pretty broken, isn't it?
>
> Would be better to just do:
>
> config CRYPTO_AES
> select CRYPTO_AES_586 if (X86 && !X86_64)
> select CRYPTO_AES_OTHER if !(X86 && !X86_64)
>
> and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.
Not really that easy. For x86 we have
aes
aes-586
aes-via
And my own personal custom-kernel preference is to use the C version of
the code on my x86 and x86-64 boxes.
Jeff
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 22:41 ` Jeff Garzik
@ 2005-03-02 22:45 ` Adrian Bunk
2005-03-02 22:49 ` Jeff Garzik
0 siblings, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-03-02 22:45 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Andrew Morton, netdev, linux-kernel
On Wed, Mar 02, 2005 at 05:41:50PM -0500, Jeff Garzik wrote:
> Andrew Morton wrote:
> >Jeff Garzik <jgarzik@pobox.com> wrote:
> >
> >>>Thing is, CRYPTO_AES on only selectable on x86.
> >>
> >>You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig,
> >>the dependencies are a bit weird:
> >>
> >>config CRYPTO_AES
> >> tristate "AES cipher algorithms"
> >> depends on CRYPTO && !(X86 && !X86_64)
> >>config CRYPTO_AES_586
> >> tristate "AES cipher algorithms (i586)"
> >> depends on CRYPTO && (X86 && !X86_64)
> >
> >
> >That's pretty broken, isn't it?
> >
> >Would be better to just do:
> >
> >config CRYPTO_AES
> > select CRYPTO_AES_586 if (X86 && !X86_64)
> > select CRYPTO_AES_OTHER if !(X86 && !X86_64)
> >
> >and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.
>
> Not really that easy. For x86 we have
>
> aes
> aes-586
> aes-via
Where is aes-via?
> And my own personal custom-kernel preference is to use the C version of
> the code on my x86 and x86-64 boxes.
That's already not possible today.
> Jeff
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 22:45 ` Adrian Bunk
@ 2005-03-02 22:49 ` Jeff Garzik
2005-03-03 15:07 ` How to handle the multiple aes variants on i386? Adrian Bunk
0 siblings, 1 reply; 96+ messages in thread
From: Jeff Garzik @ 2005-03-02 22:49 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, netdev, linux-kernel
Adrian Bunk wrote:
> On Wed, Mar 02, 2005 at 05:41:50PM -0500, Jeff Garzik wrote:
>
>>Andrew Morton wrote:
>>
>>>Jeff Garzik <jgarzik@pobox.com> wrote:
>>>
>>>
>>>>>Thing is, CRYPTO_AES on only selectable on x86.
>>>>
>>>>You're thinking about CRYPTO_AES_586. But looking at crypto/Kconfig,
>>>>the dependencies are a bit weird:
>>>>
>>>>config CRYPTO_AES
>>>> tristate "AES cipher algorithms"
>>>> depends on CRYPTO && !(X86 && !X86_64)
>>>>config CRYPTO_AES_586
>>>> tristate "AES cipher algorithms (i586)"
>>>> depends on CRYPTO && (X86 && !X86_64)
>>>
>>>
>>>That's pretty broken, isn't it?
>>>
>>>Would be better to just do:
>>>
>>>config CRYPTO_AES
>>> select CRYPTO_AES_586 if (X86 && !X86_64)
>>> select CRYPTO_AES_OTHER if !(X86 && !X86_64)
>>>
>>>and hide CRYPTO_AES_586 and CRYPTO_AES_OTHER from the outside world.
>>
>>Not really that easy. For x86 we have
>>
>> aes
>> aes-586
>> aes-via
>
>
> Where is aes-via?
drivers/crypto
>>And my own personal custom-kernel preference is to use the C version of
>>the code on my x86 and x86-64 boxes.
>
>
> That's already not possible today.
It should be.
Jeff
^ permalink raw reply [flat|nested] 96+ messages in thread
* How to handle the multiple aes variants on i386?
2005-03-02 22:49 ` Jeff Garzik
@ 2005-03-03 15:07 ` Adrian Bunk
0 siblings, 0 replies; 96+ messages in thread
From: Adrian Bunk @ 2005-03-03 15:07 UTC (permalink / raw)
To: Jeff Garzik, jmorris, davem; +Cc: Andrew Morton, netdev, linux-kernel
On Wed, Mar 02, 2005 at 05:49:26PM -0500, Jeff Garzik wrote:
> Adrian Bunk wrote:
> >On Wed, Mar 02, 2005 at 05:41:50PM -0500, Jeff Garzik wrote:
>...
> >>Not really that easy. For x86 we have
> >>
> >> aes
> >> aes-586
> >> aes-via
> >
> >
> >Where is aes-via?
>
> drivers/crypto
>
>
> >>And my own personal custom-kernel preference is to use the C version of
> >>the code on my x86 and x86-64 boxes.
> >
> >
> >That's already not possible today.
>
> It should be.
OK, rethinking about it, your arguments sound reasonable.
Could anyone explain, what exactly happens if multiple "aes" algorithms
are compiled into the kernel?
Choosing between the i386 asm and the generic versions seems easy, bug
the VIA Padlock case sounds more tricky since it works only on a subset
of the i386 architecture.
> Jeff
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread
* Re: [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects
2005-03-02 19:12 ` Jeff Garzik
2005-03-02 20:38 ` Andrew Morton
@ 2005-03-02 21:59 ` Adrian Bunk
1 sibling, 0 replies; 96+ messages in thread
From: Adrian Bunk @ 2005-03-02 21:59 UTC (permalink / raw)
To: Jeff Garzik, jmorris, davem; +Cc: Andrew Morton, netdev, linux-kernel
On Wed, Mar 02, 2005 at 02:12:04PM -0500, Jeff Garzik wrote:
> Adrian Bunk wrote:
> >On Wed, Mar 02, 2005 at 01:43:04AM -0500, Jeff Garzik wrote:
> >
> >>Adrian Bunk wrote:
> >>
> >>>+ select CRYPTO
> >>> select CRYPTO_AES
> >>> ---help---
> >>> Include software based cipher suites in support of IEEE 802.11i
> >>> (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
> >>> networks.
> >>>@@ -54,10 +55,11 @@
> >>> "ieee80211_crypt_ccmp".
> >>>
> >>>config IEEE80211_CRYPT_TKIP
> >>> tristate "IEEE 802.11i TKIP encryption"
> >>> depends on IEEE80211
> >>>+ select CRYPTO
> >>> select CRYPTO_MICHAEL_MIC
> >>
> >>
> >>'select CRYPTO_AES' should 'select CRYPTO' automatically, I would hope.
> >
> >
> >This would result in a recursive dependency.
>
> No, it wouldn't. CRYPTO_AES depends on CRYPTO, which depends on nothing.
Exactly.
And if CRYPTO_AES would select CRYPTO, you'd have a recursive
dependency.
The only possible thing would be to change all dependencies on CRYPTO to
selects. This wouldn't be unlogical since the whole crypto subsystem is
only a helper for other subsystems.
James, any opinions on this issue?
> Jeff
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 96+ messages in thread
* [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (14 preceding siblings ...)
2005-02-26 11:31 ` [2.6.11-rc4-mm1 patch] fix buggy IEEE80211_CRYPT_* selects Adrian Bunk
@ 2005-02-27 15:48 ` Adrian Bunk
2005-02-27 22:23 ` Christoph Hellwig
2005-02-28 18:07 ` [-mm patch] drivers/scsi/ch.c: make a struct static Adrian Bunk
16 siblings, 1 reply; 96+ messages in thread
From: Adrian Bunk @ 2005-02-27 15:48 UTC (permalink / raw)
To: Andrew Morton, Erich Chen; +Cc: linux-kernel, James.Bottomley, linux-scsi
On Wed, Feb 23, 2005 at 01:42:33AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.11-rc3-mm1:
>...
> +areca-raid-linux-scsi-driver-fix.patch
>
> New RAID driver (this patch is having a hard life and needs a re-review)
>...
This patch contains the following cleanups:
- make needlessly global functions static
- move arcmsr_scsi_host_template from arcmsr.h to arcmsr.c
(code doesn't belong into header files)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
Some notes:
- BOOLEAN/TRUE/FALSE, own get_min/get_max aren't kernel coding style
- the own subdirectory for this driver seems to be overkill
- aren't the "if defined(__x86_64__)" wrong for other 64bit
architectures?
drivers/scsi/arcmsr/arcmsr.c | 110 +++++++++++++++++++++++------------
drivers/scsi/arcmsr/arcmsr.h | 34 ----------
2 files changed, 73 insertions(+), 71 deletions(-)
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/arcmsr/arcmsr.h.old 2005-02-27 16:06:56.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/arcmsr/arcmsr.h 2005-02-27 16:06:25.000000000 +0100
@@ -4802,38 +4802,4 @@
** (E) Checksum : checksum of length and status or data byte
**************************************************************************
*/
-extern int arcmsr_proc_info(struct Scsi_Host *host, char *buffer, char **start,
- off_t offset, int length, int inout);
-extern int arcmsr_bios_param(struct scsi_device *sdev,
- struct block_device *bdev, sector_t capacity,
- int *info);
-extern int arcmsr_release(struct Scsi_Host *);
-extern int arcmsr_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
-extern int arcmsr_cmd_abort(Scsi_Cmnd *);
-extern int arcmsr_bus_reset(Scsi_Cmnd *);
-extern int arcmsr_ioctl(Scsi_Device * dev, int ioctl_cmd, void *arg);
-extern const char *arcmsr_info(struct Scsi_Host *);
-static Scsi_Host_Template arcmsr_scsi_host_template = {
- .module = THIS_MODULE,
- .proc_name = "arcmsr",
- .proc_info = arcmsr_proc_info,
- .name = "ARCMSR ARECA SATA RAID HOST Adapter" ARCMSR_DRIVER_VERSION, /* *name */
- .release = arcmsr_release,
- .info = arcmsr_info,
- .ioctl = arcmsr_ioctl,
- .queuecommand = arcmsr_queue_command,
- .eh_strategy_handler = NULL,
- .eh_abort_handler = arcmsr_cmd_abort,
- .eh_device_reset_handler = NULL,
- .eh_bus_reset_handler = arcmsr_bus_reset,
- .eh_host_reset_handler = NULL,
- .bios_param = arcmsr_bios_param,
- .can_queue = ARCMSR_MAX_OUTSTANDING_CMD,
- .this_id = ARCMSR_SCSI_INITIATOR_ID,
- .sg_tablesize = ARCMSR_MAX_SG_ENTRIES,
- .max_sectors = ARCMSR_MAX_XFER_SECTORS,
- .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
- .unchecked_isa_dma = 0,
- .use_clustering = DISABLE_CLUSTERING,
-};
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/arcmsr/arcmsr.c.old 2005-02-27 16:06:52.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/arcmsr/arcmsr.c 2005-02-27 16:06:25.000000000 +0100
@@ -121,15 +121,26 @@
static int arcmsr_halt_notify(struct notifier_block *nb, unsigned long event,
void *buf);
static void arcmsr_free_pci_pool(PACB pACB);
-void arcmsr_pcidev_disattach(PACB pACB);
-BOOLEAN arcmsr_wait_msgint_ready(PACB pACB);
-void arcmsr_iop_init(PACB pACB);
-int arcmsr_iop_ioctlcmd(PACB pACB, int ioctl_cmd, void *arg);
-int arcmsr_initialize(PACB pACB, struct pci_dev *pPCI_DEV);
+static void arcmsr_pcidev_disattach(PACB pACB);
+static void arcmsr_iop_init(PACB pACB);
+static int arcmsr_iop_ioctlcmd(PACB pACB, int ioctl_cmd, void *arg);
+static int arcmsr_initialize(PACB pACB, struct pci_dev *pPCI_DEV);
static irqreturn_t arcmsr_HwInterrupt(PACB pACB);
static int arcmsr_device_probe(struct pci_dev *pPCI_DEV,
const struct pci_device_id *id);
static void arcmsr_device_remove(struct pci_dev *pPCI_DEV);
+static int arcmsr_bios_param(struct scsi_device *sdev,
+ struct block_device *bdev,
+ sector_t capacity, int *geom);
+static int arcmsr_bus_reset(Scsi_Cmnd * cmd);
+static int arcmsr_cmd_abort(Scsi_Cmnd * cmd);
+static const char *arcmsr_info(struct Scsi_Host *host);
+static int arcmsr_ioctl(Scsi_Device * dev, int ioctl_cmd, void *arg);
+static int arcmsr_proc_info(struct Scsi_Host *host, char *buffer, char **start,
+ off_t offset, int length, int inout);
+static int arcmsr_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
+static int arcmsr_release(struct Scsi_Host *host);
+
/*
**********************************************************************************
**
@@ -169,13 +180,37 @@
};
MODULE_DEVICE_TABLE(pci, arcmsr_device_id_table);
-struct pci_driver arcmsr_pci_driver = {
+static struct pci_driver arcmsr_pci_driver = {
.name = "arcmsr",
.id_table = arcmsr_device_id_table,
.probe = arcmsr_device_probe,
.remove = arcmsr_device_remove,
};
+static Scsi_Host_Template arcmsr_scsi_host_template = {
+ .module = THIS_MODULE,
+ .proc_name = "arcmsr",
+ .proc_info = arcmsr_proc_info,
+ .name = "ARCMSR ARECA SATA RAID HOST Adapter" ARCMSR_DRIVER_VERSION, /* *name */
+ .release = arcmsr_release,
+ .info = arcmsr_info,
+ .ioctl = arcmsr_ioctl,
+ .queuecommand = arcmsr_queue_command,
+ .eh_strategy_handler = NULL,
+ .eh_abort_handler = arcmsr_cmd_abort,
+ .eh_device_reset_handler = NULL,
+ .eh_bus_reset_handler = arcmsr_bus_reset,
+ .eh_host_reset_handler = NULL,
+ .bios_param = arcmsr_bios_param,
+ .can_queue = ARCMSR_MAX_OUTSTANDING_CMD,
+ .this_id = ARCMSR_SCSI_INITIATOR_ID,
+ .sg_tablesize = ARCMSR_MAX_SG_ENTRIES,
+ .max_sectors = ARCMSR_MAX_XFER_SECTORS,
+ .cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
+ .unchecked_isa_dma = 0,
+ .use_clustering = DISABLE_CLUSTERING,
+};
+
/*
*********************************************************************
*********************************************************************
@@ -213,8 +248,9 @@
*********************************************************************
*********************************************************************
*/
-int arcmsr_bios_param(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int *geom)
+static int arcmsr_bios_param(struct scsi_device *sdev,
+ struct block_device *bdev,
+ sector_t capacity, int *geom)
{
int heads, sectors, cylinders, total_capacity;
@@ -409,7 +445,7 @@
**
**********************************************************************
*/
-void arcmsr_pci_unmap_dma(PCCB pCCB)
+static void arcmsr_pci_unmap_dma(PCCB pCCB)
{
PACB pACB = pCCB->pACB;
Scsi_Cmnd *pcmd = pCCB->pcmd;
@@ -528,7 +564,7 @@
**
**********************************************************************
*/
-void arcmsr_cmd_done(Scsi_Cmnd * pcmd)
+static void arcmsr_cmd_done(Scsi_Cmnd * pcmd)
{
pcmd->scsi_done(pcmd);
return;
@@ -540,7 +576,7 @@
**
************************************************************************
*/
-void arcmsr_flush_adapter_cache(PACB pACB)
+static void arcmsr_flush_adapter_cache(PACB pACB)
{
#if ARCMSR_DEBUG0
printk("arcmsr_flush_adapter_cache..............\n");
@@ -557,7 +593,7 @@
**
**********************************************************************
*/
-void arcmsr_ccb_complete(PCCB pCCB)
+static void arcmsr_ccb_complete(PCCB pCCB)
{
unsigned long flag;
PACB pACB = pCCB->pACB;
@@ -586,7 +622,7 @@
** if scsi error do auto request sense
**********************************************************************
*/
-void arcmsr_report_SenseInfoBuffer(PCCB pCCB)
+static void arcmsr_report_SenseInfoBuffer(PCCB pCCB)
{
Scsi_Cmnd *pcmd = pCCB->pcmd;
PSENSE_DATA psenseBuffer = (PSENSE_DATA) pcmd->sense_buffer;
@@ -611,7 +647,7 @@
** to insert pCCB into tail of pACB wait exec ccbQ
*********************************************************************
*/
-void arcmsr_queue_wait2go_ccb(PACB pACB, PCCB pCCB)
+static void arcmsr_queue_wait2go_ccb(PACB pACB, PCCB pCCB)
{
unsigned long flag;
int i = 0;
@@ -639,7 +675,7 @@
**
*********************************************************************
*/
-void arcmsr_abort_allcmd(PACB pACB)
+static void arcmsr_abort_allcmd(PACB pACB)
{
CHIP_REG_WRITE32(&pACB->pmu->inbound_msgaddr0,
ARCMSR_INBOUND_MESG0_ABORT_CMD);
@@ -653,7 +689,7 @@
**
**********************************************************************
*/
-BOOLEAN arcmsr_wait_msgint_ready(PACB pACB)
+static BOOLEAN arcmsr_wait_msgint_ready(PACB pACB)
{
uint32_t Index;
uint8_t Retries = 0x00;
@@ -678,7 +714,7 @@
** Return Value: Nothing.
****************************************************************************
*/
-void arcmsr_iop_reset(PACB pACB)
+static void arcmsr_iop_reset(PACB pACB)
{
PCCB pCCB;
uint32_t intmask_org, mask;
@@ -760,7 +796,7 @@
** PAGE_SIZE=4096 or 8192,PAGE_SHIFT=12
**********************************************************************
*/
-void arcmsr_build_ccb(PACB pACB, PCCB pCCB, Scsi_Cmnd * pcmd)
+static void arcmsr_build_ccb(PACB pACB, PCCB pCCB, Scsi_Cmnd * pcmd)
{
PARCMSR_CDB pARCMSR_CDB = (PARCMSR_CDB) & pCCB->arcmsr_cdb;
int8_t *psge = (int8_t *) & pARCMSR_CDB->u;
@@ -931,7 +967,7 @@
**
**************************************************************************
*/
-void arcmsr_post_wait2go_ccb(PACB pACB)
+static void arcmsr_post_wait2go_ccb(PACB pACB)
{
unsigned long flag;
PCCB pCCB;
@@ -965,7 +1001,7 @@
** Output:
**********************************************************************
*/
-void arcmsr_post_Qbuffer(PACB pACB)
+static void arcmsr_post_Qbuffer(PACB pACB)
{
uint8_t *pQbuffer;
PQBUFFER pwbuffer = (PQBUFFER) & pACB->pmu->ioctl_wbuffer;
@@ -996,7 +1032,7 @@
**
************************************************************************
*/
-void arcmsr_stop_adapter_bgrb(PACB pACB)
+static void arcmsr_stop_adapter_bgrb(PACB pACB)
{
#if ARCMSR_DEBUG0
printk("arcmsr_stop_adapter_bgrb..............\n");
@@ -1271,7 +1307,7 @@
**
************************************************************************
*/
-int arcmsr_iop_ioctlcmd(PACB pACB, int ioctl_cmd, void *arg)
+static int arcmsr_iop_ioctlcmd(PACB pACB, int ioctl_cmd, void *arg)
{
CMD_IOCTL_FIELD cmdioctlfld;
PCMD_IOCTL_FIELD pcmdioctlfld = &cmdioctlfld;
@@ -1617,7 +1653,7 @@
**
************************************************************************
*/
-int arcmsr_ioctl(Scsi_Device * dev, int ioctl_cmd, void *arg)
+static int arcmsr_ioctl(Scsi_Device * dev, int ioctl_cmd, void *arg)
{
PACB pACB;
int32_t match = 0x55AA, i;
@@ -1649,7 +1685,7 @@
**
**************************************************************************
*/
-PCCB arcmsr_get_freeccb(PACB pACB)
+static PCCB arcmsr_get_freeccb(PACB pACB)
{
PCCB pCCB;
unsigned long flag;
@@ -1821,7 +1857,7 @@
**} Scsi_Pointer;
***********************************************************************
*/
-int arcmsr_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int arcmsr_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
{
struct Scsi_Host *host = cmd->device->host;
PACB pACB = (PACB) host->hostdata;
@@ -1872,7 +1908,7 @@
**
**********************************************************************
*/
-void arcmsr_start_adapter_bgrb(PACB pACB)
+static void arcmsr_start_adapter_bgrb(PACB pACB)
{
#if ARCMSR_DEBUG0
printk
@@ -1892,7 +1928,7 @@
**
**********************************************************************
*/
-void arcmsr_iop_init(PACB pACB)
+static void arcmsr_iop_init(PACB pACB)
{
uint32_t intmask_org, mask, outbound_doorbell, firmware_state = 0;
@@ -1932,7 +1968,7 @@
**
****************************************************************************
*/
-int arcmsr_bus_reset(Scsi_Cmnd * cmd)
+static int arcmsr_bus_reset(Scsi_Cmnd * cmd)
{
PACB pACB;
@@ -1949,7 +1985,7 @@
**
*****************************************************************************************
*/
-int arcmsr_seek_cmd2abort(Scsi_Cmnd * pabortcmd)
+static int arcmsr_seek_cmd2abort(Scsi_Cmnd * pabortcmd)
{
PACB pACB = (PACB) pabortcmd->device->host->hostdata;
PCCB pCCB;
@@ -2048,7 +2084,7 @@
**
*****************************************************************************************
*/
-int arcmsr_cmd_abort(Scsi_Cmnd * cmd)
+static int arcmsr_cmd_abort(Scsi_Cmnd * cmd)
{
int error;
@@ -2112,7 +2148,7 @@
**
*********************************************************************
*/
-const char *arcmsr_info(struct Scsi_Host *host)
+static const char *arcmsr_info(struct Scsi_Host *host)
{
static char buf[256];
PACB pACB;
@@ -2212,7 +2248,7 @@
**}
************************************************************************
*/
-int arcmsr_initialize(PACB pACB, struct pci_dev *pPCI_DEV)
+static int arcmsr_initialize(PACB pACB, struct pci_dev *pPCI_DEV)
{
uint32_t intmask_org, page_base, page_offset, mem_base_start;
dma_addr_t dma_addr;
@@ -2339,7 +2375,7 @@
*********************************************************************
*********************************************************************
*/
-int arcmsr_set_info(char *buffer, int length)
+static int arcmsr_set_info(char *buffer, int length)
{
#if ARCMSR_DEBUG0
printk("arcmsr_set_info.............\n");
@@ -2352,7 +2388,7 @@
**
*********************************************************************
*/
-void arcmsr_pcidev_disattach(PACB pACB)
+static void arcmsr_pcidev_disattach(PACB pACB)
{
PCCB pCCB;
uint32_t intmask_org, mask;
@@ -2489,8 +2525,8 @@
if(YN) SPRINTF(" Yes ");\
else SPRINTF(" No ")
-int arcmsr_proc_info(struct Scsi_Host *host, char *buffer, char **start,
- off_t offset, int length, int inout)
+static int arcmsr_proc_info(struct Scsi_Host *host, char *buffer, char **start,
+ off_t offset, int length, int inout)
{
uint8_t i;
char *pos = buffer;
@@ -2528,7 +2564,7 @@
**
************************************************************************
*/
-int arcmsr_release(struct Scsi_Host *host)
+static int arcmsr_release(struct Scsi_Host *host)
{
PACB pACB;
uint8_t match = 0xff, i;
^ permalink raw reply [flat|nested] 96+ messages in thread* Re: [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups
2005-02-27 15:48 ` [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups Adrian Bunk
@ 2005-02-27 22:23 ` Christoph Hellwig
0 siblings, 0 replies; 96+ messages in thread
From: Christoph Hellwig @ 2005-02-27 22:23 UTC (permalink / raw)
To: Adrian Bunk
Cc: Andrew Morton, Erich Chen, linux-kernel, James.Bottomley,
linux-scsi
On Sun, Feb 27, 2005 at 04:48:10PM +0100, Adrian Bunk wrote:
> - aren't the "if defined(__x86_64__)" wrong for other 64bit
> architectures?
Yes. Having arch or 64bit ifdefs is pretty wrong pretty much always.
In one case it's only used to make a typedef a 32bit or 64bit integeger,
that should be using unsigned long directly always, but the other uses
looks like real problems.
^ permalink raw reply [flat|nested] 96+ messages in thread
* [-mm patch] drivers/scsi/ch.c: make a struct static
2005-02-23 9:42 2.6.11-rc4-mm1 Andrew Morton
` (15 preceding siblings ...)
2005-02-27 15:48 ` [2.6.11-rc4-mm1 patch] drivers/scsi/arcmsr/arcmsr.c cleanups Adrian Bunk
@ 2005-02-28 18:07 ` Adrian Bunk
16 siblings, 0 replies; 96+ messages in thread
From: Adrian Bunk @ 2005-02-28 18:07 UTC (permalink / raw)
To: Andrew Morton, Gerd Knorr; +Cc: linux-kernel, James.Bottomley, linux-scsi
This patch makes a needlessly global struct static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/ch.c.old 2005-02-28 18:14:48.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/ch.c 2005-02-28 18:14:55.000000000 +0100
@@ -118,7 +118,7 @@
static spinlock_t ch_devlist_lock = SPIN_LOCK_UNLOCKED;
static int ch_devcount;
-struct scsi_driver ch_template =
+static struct scsi_driver ch_template =
{
.owner = THIS_MODULE,
.gendrv = {
^ permalink raw reply [flat|nested] 96+ messages in thread