public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Olaf Hering <olh@suse.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.11-rc5
Date: Thu, 24 Feb 2005 15:50:49 +0100	[thread overview]
Message-ID: <20050224145049.GA21313@suse.de> (raw)
In-Reply-To: <Pine.LNX.4.58.0502232014190.18997@ppc970.osdl.org>

 On Wed, Feb 23, Linus Torvalds wrote:

> This time it's really supposed to be a quickie, so people who can, please 
> check it out, and we'll make the real 2.6.11 asap.

radeonfb oopses on intel.
Havent checked yet when it started with it.

ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0x1c400, 00:11:5b:83:1e:76, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
usb 5-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=133.00 Mhz, System=133.00 MHz
radeonfb: PLL min 12000 max 35000
NET: Registered protocol family 23
radeonfb: Monitor 1 type DFP found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: Assuming panel size 8x1
radeonfb: Can't find mode for panel size, going back to CRT
Unable to handle kernel paging request at virtual address f3fb4000
 printing eip:
c01dec14
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: via_ircc irda crc_ccitt snd_via82xx snd_ac97_codec snd_pcm snd_timer snd_page_alloc gameport snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore radeonfb i2c_algo_bit i2c_core via_rhine mii pci_hotplug ohci1394 ehci_hcd ieee1394 uhci_hcd via_agp agpgart usbcore reiserfs dm_mod ext3 jbd
CPU:    0
EIP:    0060:[<c01dec14>]    Not tainted VLI
EFLAGS: 00010202   (2.6.11-rc4-bk10-200502230204-usbtest)
EIP is at cfb_imageblit+0x364/0x610
eax: 00000000   ebx: f3fb4004   ecx: 00000000   edx: f3fb4000
esi: 00000004   edi: df282000   ebp: 00000007   esp: dbef1c1c
ds: 007b   es: 007b   ss: 0068
Process modprobe (pid: 3180, threadinfo=dbef0000 task=da303580)
Stack: 00000001 00000008 00000001 00000008 00000001 c04a7428 0000000a da302628
       c011b293 00000046 da36e23c da36e000 00000046 0000051f c01043cf c0102eca
       0000051f 1c46ece9 0000002b c036a2c0 df282000 00000000 0000000f 00000001
Call Trace:
 [<c011b293>] __do_softirq+0x43/0xa0
 [<c01043cf>] do_IRQ+0x1f/0x30
 [<c0102eca>] common_interrupt+0x1a/0x20
 [<c01dd570>] soft_cursor+0x190/0x200
 [<c01d9124>] bit_cursor+0x464/0x4e0
 [<c011edbf>] msleep+0x2f/0x40
 [<c01d4e18>] fbcon_cursor+0x1a8/0x280
 [<c020eac8>] hide_cursor+0x18/0x30
 [<c020edd4>] redraw_screen+0x174/0x200
 [<c01d3caa>] fbcon_prepare_logo+0x39a/0x3a0
 [<c01d47b0>] fbcon_init+0x260/0x300
 [<c020ef69>] visual_init+0xe9/0x170
 [<c02125e6>] take_over_console+0x176/0x350
 [<c01d38da>] fbcon_takeover+0x5a/0x90
 [<c01d846a>] fbcon_fb_registered+0x5a/0x70
 [<c01d8542>] fbcon_event_notify+0x52/0x80
 [<c0121898>] notifier_call_chain+0x18/0x30
 [<c01da667>] register_framebuffer+0xd7/0x150
 [<c0117713>] release_console_sem+0x13/0x90
 [<c017f7c7>] sysfs_new_dirent+0x17/0x60
 [<c017f820>] sysfs_make_dirent+0x10/0x70
 [<c017f59a>] sysfs_add_file+0x3a/0x60
 [<e0c4a698>] radeonfb_pci_register+0x308/0x510 [radeonfb]
 [<c01ce482>] pci_device_probe_static+0x32/0x50
 [<c01ce4c7>] __pci_device_probe+0x27/0x40
 [<c01ce4fb>] pci_device_probe+0x1b/0x40
 [<c021ef31>] driver_probe_device+0x21/0x60
 [<c021f05d>] driver_attach+0x4d/0x80
 [<c021f44d>] bus_add_driver+0x6d/0xa0
 [<c021f948>] driver_register+0x28/0x30
 [<c01ce6c4>] pci_register_driver+0x54/0x70
 [<c012b1a2>] sys_init_module+0x112/0x190
 [<c0102c49>] sysenter_past_esp+0x52/0x79
Code: 24 60 8b 54 24 58 29 ce 0f be 07 89 f1 d3 f8 21 d0 8b 54 24 4c 8b 4c 24 54 23 0c 82 8b 54 24 64 89 c8 31 d0 89 da 83 c3 04 85 f6 <89> 02 75 06 be 08 00 00 00 47 8b 04 24 48 89 04 24 83 3c 24 ff
 <6>usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0000:00:10.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver



  parent reply	other threads:[~2005-02-24 15:26 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-02-24  4:18 2.6.11-rc5 Linus Torvalds
2005-02-24  6:24 ` 2.6.11-rc5 Michael Neuffer
2005-02-24 15:49   ` 2.6.11-rc5 Linus Torvalds
2005-02-24  6:29 ` 2.6.11-rc5 Matt Mackall
2005-02-24 12:49   ` 2.6.11-rc5 Matthias-Christian Ott
2005-02-24 14:25     ` 2.6.11-rc5 Steven Rostedt
2005-02-24 14:57       ` 2.6.11-rc5 M.Baris Demiray
2005-02-24 15:39         ` 2.6.11-rc5 Sergey Vlasov
2005-02-24 15:57           ` 2.6.11-rc5 Steven Rostedt
2005-02-24 15:53         ` 2.6.11-rc5 Gabriel Paubert
2005-02-24 14:50 ` Olaf Hering [this message]
2005-02-24 17:14   ` 2.6.11-rc5 Olaf Hering
2005-02-24 23:28   ` 2.6.11-rc5 Benjamin Herrenschmidt
2005-02-25  7:08     ` 2.6.11-rc5 Olaf Hering
2005-02-25  7:29       ` 2.6.11-rc5 Benjamin Herrenschmidt
2005-02-25 13:30         ` 2.6.11-rc5 Mws
2005-02-26  0:50           ` 2.6.11-rc5 Benjamin Herrenschmidt
2005-03-01 11:36             ` 2.6.11-rc5 Mws
2005-03-01 14:36               ` 2.6.11-rc5 Helge Hafting
2005-03-01 14:39                 ` 2.6.11-rc5 Mws
2005-03-01 21:38               ` 2.6.11-rc5 Benjamin Herrenschmidt
2005-03-01 22:01                 ` 2.6.11-rc5 Mws
2005-02-25 17:29         ` 2.6.11-rc5 Olaf Hering
2005-02-25 17:59           ` [Linux-fbdev-devel] 2.6.11-rc5 James Simmons
2005-02-25 20:24             ` Olaf Hering
2005-02-25 21:21               ` Olaf Hering
2005-02-25 23:30                 ` Olaf Hering
2005-02-26  1:01                   ` Benjamin Herrenschmidt
2005-02-26  9:52                     ` Giuseppe Bilotta
2005-02-26  0:58                 ` [Linux-fbdev-devel] " Benjamin Herrenschmidt
2005-02-26  0:57               ` Benjamin Herrenschmidt
2005-02-26  0:54           ` 2.6.11-rc5 Benjamin Herrenschmidt
2005-02-26  0:41   ` 2.6.11-rc5 Olaf Hering
2005-02-26  0:49     ` 2.6.11-rc5 Linus Torvalds
2005-02-26  0:53       ` 2.6.11-rc5 Olaf Hering
2005-02-26  1:04         ` 2.6.11-rc5 Linus Torvalds
2005-02-26  1:08       ` [Linux-fbdev-devel] 2.6.11-rc5 Buttchereit, Axel (XL)
2005-02-26  1:17         ` Benjamin Herrenschmidt
2005-02-26  1:13     ` 2.6.11-rc5 Benjamin Herrenschmidt
2005-02-26  7:41       ` [Linux-fbdev-devel] 2.6.11-rc5 Antonino A. Daplas
2005-02-27  8:07       ` 2.6.11-rc5 Geert Uytterhoeven
2005-02-24 15:57 ` 2.6.11-rc5 (compile stats) John Cherry
2005-02-24 16:30 ` 2.6.11-rc5 Brian Gerst
2005-02-24 17:00   ` 2.6.11-rc5 Linus Torvalds
2005-02-25 21:47 ` 2.6.11-rc5 Bill Davidsen
2005-02-25 21:50   ` 2.6.11-rc5 Lee Revell
2005-02-26  5:03     ` 2.6.11-rc5 Bill Davidsen
2005-02-27 20:32 ` 2.6.11-rc5, rivafb i2c oops, bogus error handling Olaf Hering
2005-02-28 14:41   ` [Linux-fbdev-devel] " Antonino A. Daplas
2005-03-01 12:02     ` Olaf Hering
2005-03-01 20:58     ` Olaf Hering
  -- strict thread matches above, loose matches on Subject: below --
2005-02-24  6:23 2.6.11-rc5 Voluspa
     [not found] <3BjgD-5iu-7@gated-at.bofh.it>
2005-02-25 16:28 ` 2.6.11-rc5 Vincent C Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050224145049.GA21313@suse.de \
    --to=olh@suse.de \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox