* UserMode bug in 2.6.11-rc5?
@ 2005-03-02 11:36 Kristian Sørensen
2005-03-02 13:45 ` Christophe Lucas
2005-03-02 16:26 ` UserMode bug in 2.6.11-rc5? Jeff Dike
0 siblings, 2 replies; 9+ messages in thread
From: Kristian Sørensen @ 2005-03-02 11:36 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1055 bytes --]
Hi!
I've just tried usermode Linux with a 2.6.11-rc5 kernel. My kernel boots, but
when the shell is to be spawned it freezes:
----
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting internet superserver: inetd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
INIT: Id "0" respawning too fast: disabled for 5 minutes
INIT: Id "1" respawning too fast: disabled for 5 minutes
INIT: Id "2" respawning too fast: disabled for 5 minutes
INIT: Id "c" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
----
I've attached the .config for both 2.6.10 (working perfectly) and the one for
2.6.11-rc5. The root filesystem this:
http://prdownloads.sourceforge.net/user-mode-linux/Debian-3.0r0.ext2.bz2
Best regards,
Kristian.
--
Kristian Sørensen
- The Umbrella Project -- Security for Consumer Electronics
http://umbrella.sourceforge.net
E-mail: ipqw@users.sf.net, Phone: +45 29723816
[-- Attachment #2: DOTconfig-2.6.10_um --]
[-- Type: text/plain, Size: 9020 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10
# Wed Mar 2 12:15:09 2005
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_USERMODE=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
#
# UML-specific options
#
CONFIG_MODE_TT=y
CONFIG_MODE_SKAS=y
CONFIG_NET=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_HOSTFS=y
CONFIG_MCONSOLE=y
# CONFIG_HOST_2G_2G is not set
# CONFIG_SMP is not set
CONFIG_NEST_LEVEL=0
CONFIG_KERNEL_HALF_GIGS=1
CONFIG_KERNEL_STACK_ORDER=2
# CONFIG_UML_REAL_TIME_CLOCK is not set
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Character Devices
#
CONFIG_STDIO_CONSOLE=y
CONFIG_SSL=y
CONFIG_FD_CHAN=y
CONFIG_NULL_CHAN=y
CONFIG_PORT_CHAN=y
CONFIG_PTY_CHAN=y
CONFIG_TTY_CHAN=y
CONFIG_XTERM_CHAN=y
# CONFIG_NOCONFIG_CHAN is not set
CONFIG_CON_ZERO_CHAN="fd:0,fd:1"
CONFIG_CON_CHAN="xterm"
CONFIG_SSL_CHAN="pty"
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
CONFIG_UML_SOUND=y
CONFIG_SOUND=y
CONFIG_HOSTAUDIO=y
#
# Block Devices
#
CONFIG_BLK_DEV_UBD=y
# CONFIG_BLK_DEV_UBD_SYNC is not set
CONFIG_BLK_DEV_COW_COMMON=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_NETDEVICES=y
#
# UML Network Devices
#
CONFIG_UML_NET=y
CONFIG_UML_NET_ETHERTAP=y
CONFIG_UML_NET_TUNTAP=y
CONFIG_UML_NET_SLIP=y
CONFIG_UML_NET_DAEMON=y
CONFIG_UML_NET_MCAST=y
CONFIG_UML_NET_SLIRP=y
#
# Networking support
#
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_SELINUX is not set
CONFIG_SECURITY_UMBRELLA=y
CONFIG_SECURITY_UMBRELLA_PROCFS=y
CONFIG_SECURITY_UMBRELLA_DEBUG=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_INPUT is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
[-- Attachment #3: DOTconfig-2.6.11-rc5_um --]
[-- Type: text/plain, Size: 9485 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-rc5
# Wed Mar 2 12:22:58 2005
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_USERMODE=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
#
# UML-specific options
#
CONFIG_MODE_TT=y
CONFIG_MODE_SKAS=y
# CONFIG_64_BIT is not set
CONFIG_TOP_ADDR=0xc0000000
# CONFIG_3_LEVEL_PGTABLES is not set
CONFIG_ARCH_HAS_SC_SIGNALS=y
CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y
CONFIG_LD_SCRIPT_STATIC=y
CONFIG_NET=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_HOSTFS=y
CONFIG_MCONSOLE=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_HOST_2G_2G is not set
# CONFIG_SMP is not set
CONFIG_NEST_LEVEL=0
CONFIG_KERNEL_HALF_GIGS=1
CONFIG_KERNEL_STACK_ORDER=2
# CONFIG_UML_REAL_TIME_CLOCK is not set
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Character Devices
#
CONFIG_STDERR_CONSOLE=y
CONFIG_STDIO_CONSOLE=y
CONFIG_SSL=y
CONFIG_NULL_CHAN=y
CONFIG_PORT_CHAN=y
CONFIG_PTY_CHAN=y
CONFIG_TTY_CHAN=y
CONFIG_XTERM_CHAN=y
# CONFIG_NOCONFIG_CHAN is not set
CONFIG_CON_ZERO_CHAN="fd:0,fd:1"
CONFIG_CON_CHAN="xterm"
CONFIG_SSL_CHAN="pty"
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_WATCHDOG is not set
CONFIG_UML_SOUND=y
CONFIG_SOUND=y
CONFIG_HOSTAUDIO=y
#
# Block devices
#
CONFIG_BLK_DEV_UBD=y
# CONFIG_BLK_DEV_UBD_SYNC is not set
CONFIG_BLK_DEV_COW_COMMON=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_NETDEVICES=y
#
# UML Network Devices
#
CONFIG_UML_NET=y
CONFIG_UML_NET_ETHERTAP=y
CONFIG_UML_NET_TUNTAP=y
CONFIG_UML_NET_SLIP=y
CONFIG_UML_NET_DAEMON=y
CONFIG_UML_NET_MCAST=y
CONFIG_UML_NET_SLIRP=y
#
# Networking support
#
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_CAPABILITIES is not set
# CONFIG_SECURITY_SELINUX is not set
CONFIG_SECURITY_UMBRELLA=y
CONFIG_SECURITY_UMBRELLA_PROCFS=y
CONFIG_SECURITY_UMBRELLA_DEBUG=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_INPUT is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5?
2005-03-02 11:36 UserMode bug in 2.6.11-rc5? Kristian Sørensen
@ 2005-03-02 13:45 ` Christophe Lucas
2005-03-02 13:59 ` UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2 Kristian Sørensen
2005-03-02 16:26 ` UserMode bug in 2.6.11-rc5? Jeff Dike
1 sibling, 1 reply; 9+ messages in thread
From: Christophe Lucas @ 2005-03-02 13:45 UTC (permalink / raw)
To: Kristian Sørensen; +Cc: linux-kernel
Kristian Sørensen (ks@cs.aau.dk) wrote:
> Hi!
>
> I've just tried usermode Linux with a 2.6.11-rc5 kernel. My kernel boots, but
> when the shell is to be spawned it freezes:
> ----
> INIT: Entering runlevel: 2
> Starting system log daemon: syslogd.
> Starting kernel log daemon: klogd.
> Starting internet superserver: inetd.
> Starting deferred execution scheduler: atd.
> Starting periodic command scheduler: cron.
> INIT: Id "0" respawning too fast: disabled for 5 minutes
> INIT: Id "1" respawning too fast: disabled for 5 minutes
> INIT: Id "2" respawning too fast: disabled for 5 minutes
> INIT: Id "c" respawning too fast: disabled for 5 minutes
> INIT: no more processes left in this runlevel
> ----
>
> I've attached the .config for both 2.6.10 (working perfectly) and the one for
> 2.6.11-rc5. The root filesystem this:
> http://prdownloads.sourceforge.net/user-mode-linux/Debian-3.0r0.ext2.bz2
Hi,
What do you have in your /etc/inittab of your root_fs ?
I think you sould replace tty0 by vc/0 such as.
I have had this on a kernel 2.6.10 and debian-3.1 root_fs.
~Christophe
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2
2005-03-02 13:45 ` Christophe Lucas
@ 2005-03-02 13:59 ` Kristian Sørensen
2005-03-02 14:05 ` Kristian Sørensen
2005-03-02 18:42 ` Jeff Dike
0 siblings, 2 replies; 9+ messages in thread
From: Kristian Sørensen @ 2005-03-02 13:59 UTC (permalink / raw)
To: Christophe Lucas; +Cc: linux-kernel
On Wednesday 02 March 2005 14:45, Christophe Lucas wrote:
> Kristian Sørensen (ks@cs.aau.dk) wrote:
> > Hi!
> >
> > I've just tried usermode Linux with a 2.6.11-rc5 kernel. My kernel boots,
> > but when the shell is to be spawned it freezes:
> > ----
> > INIT: Entering runlevel: 2
> > Starting system log daemon: syslogd.
> > Starting kernel log daemon: klogd.
> > Starting internet superserver: inetd.
> > Starting deferred execution scheduler: atd.
> > Starting periodic command scheduler: cron.
> > INIT: Id "0" respawning too fast: disabled for 5 minutes
> > INIT: Id "1" respawning too fast: disabled for 5 minutes
> > INIT: Id "2" respawning too fast: disabled for 5 minutes
> > INIT: Id "c" respawning too fast: disabled for 5 minutes
> > INIT: no more processes left in this runlevel
> > ----
> >
> > I've attached the .config for both 2.6.10 (working perfectly) and the one
> > for 2.6.11-rc5. The root filesystem this:
> > http://prdownloads.sourceforge.net/user-mode-linux/Debian-3.0r0.ext2.bz2
>
> Hi,
>
> What do you have in your /etc/inittab of your root_fs ?
> I think you sould replace tty0 by vc/0 such as.
>
> I have had this on a kernel 2.6.10 and debian-3.1 root_fs.
>
> ~Christophe
Hey! Thanks - that fixed the problem! :-D
Best,
Kristian.
--
Kristian Sørensen
- The Umbrella Project -- Security for Consumer Electronics
http://umbrella.sourceforge.net
E-mail: ipqw@users.sf.net, Phone: +45 29723816
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2
2005-03-02 13:59 ` UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2 Kristian Sørensen
@ 2005-03-02 14:05 ` Kristian Sørensen
2005-03-02 14:25 ` Christophe Lucas
2005-03-02 18:42 ` Jeff Dike
1 sibling, 1 reply; 9+ messages in thread
From: Kristian Sørensen @ 2005-03-02 14:05 UTC (permalink / raw)
To: Christophe Lucas; +Cc: linux-kernel
On Wednesday 02 March 2005 14:59, Kristian Sørensen wrote:
> On Wednesday 02 March 2005 14:45, Christophe Lucas wrote:
> > Kristian Sørensen (ks@cs.aau.dk) wrote:
> > > Hi!
> > >
> > > I've just tried usermode Linux with a 2.6.11-rc5 kernel. My kernel
> > > boots, but when the shell is to be spawned it freezes:
> > > ----
> > > INIT: Entering runlevel: 2
> > > Starting system log daemon: syslogd.
> > > Starting kernel log daemon: klogd.
> > > Starting internet superserver: inetd.
> > > Starting deferred execution scheduler: atd.
> > > Starting periodic command scheduler: cron.
> > > INIT: Id "0" respawning too fast: disabled for 5 minutes
> > > INIT: Id "1" respawning too fast: disabled for 5 minutes
> > > INIT: Id "2" respawning too fast: disabled for 5 minutes
> > > INIT: Id "c" respawning too fast: disabled for 5 minutes
> > > INIT: no more processes left in this runlevel
> > > ----
> > >
> > > I've attached the .config for both 2.6.10 (working perfectly) and the
> > > one for 2.6.11-rc5. The root filesystem this:
> > > http://prdownloads.sourceforge.net/user-mode-linux/Debian-3.0r0.ext2.bz
> > >2
> >
> > Hi,
> >
> > What do you have in your /etc/inittab of your root_fs ?
> > I think you sould replace tty0 by vc/0 such as.
> >
> > I have had this on a kernel 2.6.10 and debian-3.1 root_fs.
> >
> > ~Christophe
>
> Hey! Thanks - that fixed the problem! :-D
Damn :-( Now the terminal is ready - but the passwords is not reconized (both
in 2.6.10 and 2.6.11-rc5) :-/
--
Kristian Sørensen
- The Umbrella Project -- Security for Consumer Electronics
http://umbrella.sourceforge.net
E-mail: ipqw@users.sf.net, Phone: +45 29723816
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2
2005-03-02 14:05 ` Kristian Sørensen
@ 2005-03-02 14:25 ` Christophe Lucas
0 siblings, 0 replies; 9+ messages in thread
From: Christophe Lucas @ 2005-03-02 14:25 UTC (permalink / raw)
To: Kristian Sørensen; +Cc: linux-kernel
Kristian Sørensen (ks@cs.aau.dk) wrote:
> On Wednesday 02 March 2005 14:59, Kristian Sørensen wrote:
> > On Wednesday 02 March 2005 14:45, Christophe Lucas wrote:
> > > Kristian Sørensen (ks@cs.aau.dk) wrote:
> > > > Hi!
> > > >
> > > > I've just tried usermode Linux with a 2.6.11-rc5 kernel. My kernel
> > > > boots, but when the shell is to be spawned it freezes:
> > > > ----
> > > > INIT: Entering runlevel: 2
> > > > Starting system log daemon: syslogd.
> > > > Starting kernel log daemon: klogd.
> > > > Starting internet superserver: inetd.
> > > > Starting deferred execution scheduler: atd.
> > > > Starting periodic command scheduler: cron.
> > > > INIT: Id "0" respawning too fast: disabled for 5 minutes
> > > > INIT: Id "1" respawning too fast: disabled for 5 minutes
> > > > INIT: Id "2" respawning too fast: disabled for 5 minutes
> > > > INIT: Id "c" respawning too fast: disabled for 5 minutes
> > > > INIT: no more processes left in this runlevel
> > > > ----
> > > >
> > > > I've attached the .config for both 2.6.10 (working perfectly) and the
> > > > one for 2.6.11-rc5. The root filesystem this:
> > > > http://prdownloads.sourceforge.net/user-mode-linux/Debian-3.0r0.ext2.bz
> > > >2
> > >
> > > Hi,
> > >
> > > What do you have in your /etc/inittab of your root_fs ?
> > > I think you sould replace tty0 by vc/0 such as.
> > >
> > > I have had this on a kernel 2.6.10 and debian-3.1 root_fs.
> > >
> > > ~Christophe
> >
> > Hey! Thanks - that fixed the problem! :-D
> Damn :-( Now the terminal is ready - but the passwords is not reconized (both
> in 2.6.10 and 2.6.11-rc5) :-/
/etc/passwd and /etc/shadow is not initialized, more precisely you don't
have the rigth password.
You can have a debian-3.1 root_fs on
http://titux.homeunix.org/~clucas/uml/
But I think we will go on this topic out of this mailing list.
--
~Christophe
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5?
2005-03-02 11:36 UserMode bug in 2.6.11-rc5? Kristian Sørensen
2005-03-02 13:45 ` Christophe Lucas
@ 2005-03-02 16:26 ` Jeff Dike
1 sibling, 0 replies; 9+ messages in thread
From: Jeff Dike @ 2005-03-02 16:26 UTC (permalink / raw)
To: Kristian Sørensen; +Cc: linux-kernel, jdike
ks@cs.aau.dk said:
> I've just tried usermode Linux with a 2.6.11-rc5 kernel. My kernel
> boots, but when the shell is to be spawned it freezes:
Can you try narrowing the problem down? Start with the 2.6.11-rcx patches
to figure out what -rc broke, and then start figuring out which patch caused
the problem?
Jeff
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2
2005-03-02 18:42 ` Jeff Dike
@ 2005-03-02 17:09 ` Kristian Sørensen
2005-03-02 18:35 ` Christophe Lucas
0 siblings, 1 reply; 9+ messages in thread
From: Kristian Sørensen @ 2005-03-02 17:09 UTC (permalink / raw)
To: Jeff Dike; +Cc: Christophe Lucas, linux-kernel
On Wednesday 02 March 2005 19:42, Jeff Dike wrote:
> ks@cs.aau.dk said:
> > Hey! Thanks - that fixed the problem! :-D
>
> Didn't you say this this setup worked with 2.6.10? That's why I didn't
> suggest staring at /etc/inittab.
Yes - it works fine with 2.6.10. Does anyone of you know why/where the change
was?
Cheers,
KS.
--
Kristian Sørensen
E-mail: ipqw@users.sf.net, Phone: +45 29723816
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2
2005-03-02 17:09 ` Kristian Sørensen
@ 2005-03-02 18:35 ` Christophe Lucas
0 siblings, 0 replies; 9+ messages in thread
From: Christophe Lucas @ 2005-03-02 18:35 UTC (permalink / raw)
To: Kristian Sørensen; +Cc: linux-kernel
Kristian Sørensen (ks@cs.aau.dk) wrote:
> On Wednesday 02 March 2005 19:42, Jeff Dike wrote:
> > ks@cs.aau.dk said:
> > > Hey! Thanks - that fixed the problem! :-D
> >
> > Didn't you say this this setup worked with 2.6.10? That's why I didn't
> > suggest staring at /etc/inittab.
> Yes - it works fine with 2.6.10. Does anyone of you know why/where the change
> was?
For my part, I have made this changes on a 2.6.9 kernel to make it work
about this problem.
~Christophe
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2
2005-03-02 13:59 ` UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2 Kristian Sørensen
2005-03-02 14:05 ` Kristian Sørensen
@ 2005-03-02 18:42 ` Jeff Dike
2005-03-02 17:09 ` Kristian Sørensen
1 sibling, 1 reply; 9+ messages in thread
From: Jeff Dike @ 2005-03-02 18:42 UTC (permalink / raw)
To: Kristian Sørensen; +Cc: Christophe Lucas, linux-kernel
ks@cs.aau.dk said:
> Hey! Thanks - that fixed the problem! :-D
Didn't you say this this setup worked with 2.6.10? That's why I didn't suggest
staring at /etc/inittab.
Jeff
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2005-03-02 18:35 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-02 11:36 UserMode bug in 2.6.11-rc5? Kristian Sørensen
2005-03-02 13:45 ` Christophe Lucas
2005-03-02 13:59 ` UserMode bug in 2.6.11-rc5? autolearn=disabled version=3.0.2 Kristian Sørensen
2005-03-02 14:05 ` Kristian Sørensen
2005-03-02 14:25 ` Christophe Lucas
2005-03-02 18:42 ` Jeff Dike
2005-03-02 17:09 ` Kristian Sørensen
2005-03-02 18:35 ` Christophe Lucas
2005-03-02 16:26 ` UserMode bug in 2.6.11-rc5? Jeff Dike
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox