From: Gerd Knorr <kraxel@bytesex.org>
To: Andrew Morton <akpm@osdl.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [patch] v4l: IR common update
Date: Tue, 8 Mar 2005 11:43:54 +0100 [thread overview]
Message-ID: <20050308104354.GA30665@bytesex> (raw)
Changes:
* add some keytables which are used by both bttv and cx88 driver
so they can be shared.
* add IR decoding helper functions.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
---
drivers/media/common/ir-common.c | 164 ++++++++++++++++++++++++++++++-
include/media/ir-common.h | 6 -
2 files changed, 167 insertions(+), 3 deletions(-)
Index: linux-2.6.11/include/media/ir-common.h
===================================================================
--- linux-2.6.11.orig/include/media/ir-common.h 2005-03-07 10:15:15.000000000 +0100
+++ linux-2.6.11/include/media/ir-common.h 2005-03-07 16:17:34.000000000 +0100
@@ -1,5 +1,5 @@
/*
- * $Id: ir-common.h,v 1.6 2004/09/15 16:15:24 kraxel Exp $
+ * $Id: ir-common.h,v 1.8 2005/02/22 12:28:40 kraxel Exp $
*
* some common structs and functions to handle infrared remotes via
* input layer ...
@@ -47,7 +47,9 @@ struct ir_input_state {
};
extern IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE];
extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE];
void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
int ir_type, IR_KEYTAB_TYPE *ir_codes);
@@ -55,6 +57,8 @@ void ir_input_nokey(struct input_dev *de
void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
u32 ir_key, u32 ir_raw);
u32 ir_extract_bits(u32 data, u32 mask);
+int ir_dump_samples(u32 *samples, int count);
+int ir_decode_biphase(u32 *samples, int count, int low, int high);
/*
* Local variables:
Index: linux-2.6.11/drivers/media/common/ir-common.c
===================================================================
--- linux-2.6.11.orig/drivers/media/common/ir-common.c 2005-03-07 10:14:43.000000000 +0100
+++ linux-2.6.11/drivers/media/common/ir-common.c 2005-03-07 16:17:34.000000000 +0100
@@ -1,5 +1,5 @@
/*
- * $Id: ir-common.c,v 1.6 2004/12/10 12:33:39 kraxel Exp $
+ * $Id: ir-common.c,v 1.8 2005/02/22 12:28:40 kraxel Exp $
*
* some common structs and functions to handle infrared remotes via
* input layer ...
@@ -23,7 +23,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-
#include <media/ir-common.h>
/* -------------------------------------------------------------------------- */
@@ -45,6 +44,7 @@ module_param(debug, int, 0644);
/* generic RC5 keytable */
/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
+/* used by old (black) Hauppauge remotes */
IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB_SIZE] = {
[ 0x00 ] = KEY_KP0, // 0
[ 0x01 ] = KEY_KP1, // 1
@@ -117,12 +117,102 @@ IR_KEYTAB_TYPE ir_codes_rc5_tv[IR_KEYTAB
};
EXPORT_SYMBOL_GPL(ir_codes_rc5_tv);
+/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
+IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = {
+ [ 5 ] = KEY_KP1,
+ [ 6 ] = KEY_KP2,
+ [ 7 ] = KEY_KP3,
+ [ 9 ] = KEY_KP4,
+ [ 10 ] = KEY_KP5,
+ [ 11 ] = KEY_KP6,
+ [ 13 ] = KEY_KP7,
+ [ 14 ] = KEY_KP8,
+ [ 15 ] = KEY_KP9,
+ [ 18 ] = KEY_KP0,
+
+ [ 0 ] = KEY_POWER,
+// [ 27 ] = MTS button
+ [ 2 ] = KEY_TUNER, // TV/FM
+ [ 30 ] = KEY_VIDEO,
+// [ 22 ] = display button
+ [ 4 ] = KEY_VOLUMEUP,
+ [ 8 ] = KEY_VOLUMEDOWN,
+ [ 12 ] = KEY_CHANNELUP,
+ [ 16 ] = KEY_CHANNELDOWN,
+ [ 3 ] = KEY_ZOOM, // fullscreen
+ [ 31 ] = KEY_SUBTITLE, // closed caption/teletext
+ [ 32 ] = KEY_SLEEP,
+// [ 41 ] = boss key
+ [ 20 ] = KEY_MUTE,
+ [ 43 ] = KEY_RED,
+ [ 44 ] = KEY_GREEN,
+ [ 45 ] = KEY_YELLOW,
+ [ 46 ] = KEY_BLUE,
+ [ 24 ] = KEY_KPPLUS, //fine tune +
+ [ 25 ] = KEY_KPMINUS, //fine tune -
+// [ 42 ] = picture in picture
+ [ 33 ] = KEY_KPDOT,
+ [ 19 ] = KEY_KPENTER,
+// [ 17 ] = recall
+ [ 34 ] = KEY_BACK,
+ [ 35 ] = KEY_PLAYPAUSE,
+ [ 36 ] = KEY_NEXT,
+// [ 37 ] = time shifting
+ [ 38 ] = KEY_STOP,
+ [ 39 ] = KEY_RECORD
+// [ 40 ] = snapshot
+};
+EXPORT_SYMBOL_GPL(ir_codes_winfast);
+
/* empty keytable, can be used as placeholder for not-yet created keytables */
IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE] = {
[ 42 ] = KEY_COFFEE,
};
EXPORT_SYMBOL_GPL(ir_codes_empty);
+/* Hauppauge: the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ * almost rc5 coding, but some non-standard keys */
+IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE] = {
+ [ 0x00 ] = KEY_KP0, // 0
+ [ 0x01 ] = KEY_KP1, // 1
+ [ 0x02 ] = KEY_KP2, // 2
+ [ 0x03 ] = KEY_KP3, // 3
+ [ 0x04 ] = KEY_KP4, // 4
+ [ 0x05 ] = KEY_KP5, // 5
+ [ 0x06 ] = KEY_KP6, // 6
+ [ 0x07 ] = KEY_KP7, // 7
+ [ 0x08 ] = KEY_KP8, // 8
+ [ 0x09 ] = KEY_KP9, // 9
+ [ 0x0b ] = KEY_RED, // red button
+ [ 0x0c ] = KEY_OPTION, // black key without text
+ [ 0x0d ] = KEY_MENU, // menu
+ [ 0x0f ] = KEY_MUTE, // mute
+ [ 0x10 ] = KEY_VOLUMEUP, // volume +
+ [ 0x11 ] = KEY_VOLUMEDOWN, // volume -
+ [ 0x1e ] = KEY_NEXT, // skip >|
+ [ 0x1f ] = KEY_EXIT, // back/exit
+ [ 0x20 ] = KEY_CHANNELUP, // channel / program +
+ [ 0x21 ] = KEY_CHANNELDOWN, // channel / program -
+ [ 0x22 ] = KEY_CHANNEL, // source (old black remote)
+ [ 0x24 ] = KEY_PREVIOUS, // replay |<
+ [ 0x25 ] = KEY_ENTER, // OK
+ [ 0x26 ] = KEY_SLEEP, // minimize (old black remote)
+ [ 0x29 ] = KEY_BLUE, // blue key
+ [ 0x2e ] = KEY_GREEN, // green button
+ [ 0x30 ] = KEY_PAUSE, // pause
+ [ 0x32 ] = KEY_REWIND, // backward <<
+ [ 0x34 ] = KEY_FASTFORWARD, // forward >>
+ [ 0x35 ] = KEY_PLAY, // play
+ [ 0x36 ] = KEY_STOP, // stop
+ [ 0x37 ] = KEY_RECORD, // recording
+ [ 0x38 ] = KEY_YELLOW, // yellow key
+ [ 0x3b ] = KEY_SELECT, // top right button
+ [ 0x3c ] = KEY_ZOOM, // full
+ [ 0x3d ] = KEY_POWER, // system power (green button)
+};
+EXPORT_SYMBOL(ir_codes_hauppauge_new);
+
/* -------------------------------------------------------------------------- */
static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
@@ -192,6 +282,8 @@ void ir_input_keydown(struct input_dev *
#endif
}
+/* -------------------------------------------------------------------------- */
+
u32 ir_extract_bits(u32 data, u32 mask)
{
int mbit, vbit;
@@ -209,10 +301,78 @@ u32 ir_extract_bits(u32 data, u32 mask)
return value;
}
+static int inline getbit(u32 *samples, int bit)
+{
+ return (samples[bit/32] & (1 << (31-(bit%32)))) ? 1 : 0;
+}
+
+/* sump raw samples for visual debugging ;) */
+int ir_dump_samples(u32 *samples, int count)
+{
+ int i, bit, start;
+
+ printk(KERN_DEBUG "ir samples: ");
+ start = 0;
+ for (i = 0; i < count * 32; i++) {
+ bit = getbit(samples,i);
+ if (bit)
+ start = 1;
+ if (0 == start)
+ continue;
+ printk("%s", bit ? "#" : "_");
+ }
+ printk("\n");
+ return 0;
+}
+
+/* decode raw samples, biphase coding, used by rc5 for example */
+int ir_decode_biphase(u32 *samples, int count, int low, int high)
+{
+ int i,last,bit,len,flips;
+ u32 value;
+
+ /* find start bit (1) */
+ for (i = 0; i < 32; i++) {
+ bit = getbit(samples,i);
+ if (bit)
+ break;
+ }
+
+ /* go decoding */
+ len = 0;
+ flips = 0;
+ value = 1;
+ for (; i < count * 32; i++) {
+ if (len > high)
+ break;
+ if (flips > 1)
+ break;
+ last = bit;
+ bit = getbit(samples,i);
+ if (last == bit) {
+ len++;
+ continue;
+ }
+ if (len < low) {
+ len++;
+ flips++;
+ continue;
+ }
+ value <<= 1;
+ value |= bit;
+ flips = 0;
+ len = 1;
+ }
+ return value;
+}
+
EXPORT_SYMBOL_GPL(ir_input_init);
EXPORT_SYMBOL_GPL(ir_input_nokey);
EXPORT_SYMBOL_GPL(ir_input_keydown);
+
EXPORT_SYMBOL_GPL(ir_extract_bits);
+EXPORT_SYMBOL_GPL(ir_dump_samples);
+EXPORT_SYMBOL_GPL(ir_decode_biphase);
/*
* Local variables:
--
#define printk(args...) fprintf(stderr, ## args)
reply other threads:[~2005-03-08 10:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050308104354.GA30665@bytesex \
--to=kraxel@bytesex.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox