From: Adrian Bunk <bunk@stusta.de>
To: Andrew Morton <akpm@osdl.org>
Cc: kkeil@suse.de, kai.germaschewski@gmx.de,
isdn4linux@listserv.isdn4linux.de, linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/isdn/pcbit/: possible cleanups
Date: Sun, 13 Mar 2005 04:54:04 +0100 [thread overview]
Message-ID: <20050313035404.GS3814@stusta.de> (raw)
This patch contains the following possible cleanups:
- make some needlessly global functions static
- remove the following unused global functions:
- callbacks.c: cb_out_3
- capi.c: capi_decode_disc_conf
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was already sent on:
- 9 Feb 2005
drivers/isdn/pcbit/callbacks.c | 17 -----------------
drivers/isdn/pcbit/callbacks.h | 3 ---
drivers/isdn/pcbit/capi.c | 10 ----------
drivers/isdn/pcbit/capi.h | 1 -
drivers/isdn/pcbit/drv.c | 16 ++++++++--------
5 files changed, 8 insertions(+), 39 deletions(-)
--- linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/callbacks.h.old 2005-02-09 03:27:18.000000000 +0100
+++ linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/callbacks.h 2005-02-09 03:27:24.000000000 +0100
@@ -19,9 +19,6 @@
extern void cb_out_2(struct pcbit_dev * dev, struct pcbit_chan* chan,
struct callb_data *data);
-extern void cb_out_3(struct pcbit_dev * dev, struct pcbit_chan* chan,
- struct callb_data *data);
-
extern void cb_in_1(struct pcbit_dev * dev, struct pcbit_chan* chan,
struct callb_data *data);
extern void cb_in_2(struct pcbit_dev * dev, struct pcbit_chan* chan,
--- linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/callbacks.c.old 2005-02-09 03:27:32.000000000 +0100
+++ linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/callbacks.c 2005-02-09 03:27:49.000000000 +0100
@@ -125,23 +125,6 @@
/*
- * Disconnect received (actually RELEASE COMPLETE)
- * This means we were not able to establish connection with remote
- * Inform the big boss above
- */
-void cb_out_3(struct pcbit_dev * dev, struct pcbit_chan* chan,
- struct callb_data *data)
-{
- isdn_ctrl ictl;
-
- ictl.command = ISDN_STAT_DHUP;
- ictl.driver=dev->id;
- ictl.arg=chan->id;
- dev->dev_if->statcallb(&ictl);
-}
-
-
-/*
* Incoming call received
* inform user
*/
--- linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/capi.h.old 2005-02-09 03:28:06.000000000 +0100
+++ linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/capi.h 2005-02-09 03:28:14.000000000 +0100
@@ -54,7 +54,6 @@
/* Connection Termination */
extern int capi_disc_req(ushort callref, struct sk_buff **skb, u_char cause);
-extern int capi_decode_disc_conf(struct pcbit_chan *chan, struct sk_buff *skb);
extern int capi_decode_disc_ind(struct pcbit_chan *chan, struct sk_buff *skb);
extern int capi_disc_resp(struct pcbit_chan *chan, struct sk_buff **skb);
--- linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/capi.c.old 2005-02-09 03:28:26.000000000 +0100
+++ linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/capi.c 2005-02-09 03:28:32.000000000 +0100
@@ -627,16 +627,6 @@
return 0;
}
-int capi_decode_disc_conf(struct pcbit_chan *chan, struct sk_buff *skb)
-{
- ushort errcode;
-
- errcode = *((ushort*) skb->data);
- skb_pull(skb, 2);
-
- return errcode;
-}
-
#ifdef DEBUG
int capi_decode_debug_188(u_char *hdr, ushort hdrlen)
{
--- linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/drv.c.old 2005-02-09 03:29:07.000000000 +0100
+++ linux-2.6.11-rc3-mm1-full/drivers/isdn/pcbit/drv.c 2005-02-09 03:30:10.000000000 +0100
@@ -56,10 +56,10 @@
* prototypes
*/
-int pcbit_command(isdn_ctrl* ctl);
-int pcbit_stat(u_char __user * buf, int len, int, int);
-int pcbit_xmit(int driver, int chan, int ack, struct sk_buff *skb);
-int pcbit_writecmd(const u_char __user *, int, int, int);
+static int pcbit_command(isdn_ctrl* ctl);
+static int pcbit_stat(u_char __user * buf, int len, int, int);
+static int pcbit_xmit(int driver, int chan, int ack, struct sk_buff *skb);
+static int pcbit_writecmd(const u_char __user *, int, int, int);
static int set_protocol_running(struct pcbit_dev * dev);
@@ -238,7 +238,7 @@
}
#endif
-int pcbit_command(isdn_ctrl* ctl)
+static int pcbit_command(isdn_ctrl* ctl)
{
struct pcbit_dev *dev;
struct pcbit_chan *chan;
@@ -330,7 +330,7 @@
}
#endif
-int pcbit_xmit(int driver, int chnum, int ack, struct sk_buff *skb)
+static int pcbit_xmit(int driver, int chnum, int ack, struct sk_buff *skb)
{
ushort hdrlen;
int refnum, len;
@@ -389,7 +389,7 @@
return len;
}
-int pcbit_writecmd(const u_char __user *buf, int len, int driver, int channel)
+static int pcbit_writecmd(const u_char __user *buf, int len, int driver, int channel)
{
struct pcbit_dev * dev;
int i, j;
@@ -713,7 +713,7 @@
static int stat_st = 0;
static int stat_end = 0;
-int pcbit_stat(u_char __user *buf, int len, int driver, int channel)
+static int pcbit_stat(u_char __user *buf, int len, int driver, int channel)
{
int stat_count;
stat_count = stat_end - stat_st;
next reply other threads:[~2005-03-13 4:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-13 3:54 Adrian Bunk [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-02-09 2:55 [2.6 patch] drivers/isdn/pcbit/: possible cleanups Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050313035404.GS3814@stusta.de \
--to=bunk@stusta.de \
--cc=akpm@osdl.org \
--cc=isdn4linux@listserv.isdn4linux.de \
--cc=kai.germaschewski@gmx.de \
--cc=kkeil@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox