[Patch 2/12] Fix pci_enable_device() for p2p bridges

[Rajesh Shah <rajesh.shah@intel.com>]

When checking if a PCI to PCI bridge should be enabled to decode
memory and/or IO resources, we need to look at all device 
resources not just the first 6. This is needed to allow PCI
bridges to pass down memory and IO accesses to child devices
even when the bridge itself does not consume resources in its
PCI BARs.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
---

 linux-2.6.11-mm4-iohp-rshah1/arch/ia64/pci/pci.c |   10 +++++++---
 1 files changed, 7 insertions(+), 3 deletions(-)

diff -puN arch/ia64/pci/pci.c~fix-ia64-pcibios_enable_resources arch/ia64/pci/pci.c
--- linux-2.6.11-mm4-iohp/arch/ia64/pci/pci.c~fix-ia64-pcibios_enable_resources	2005-03-16 13:07:02.055015329 -0800
+++ linux-2.6.11-mm4-iohp-rshah1/arch/ia64/pci/pci.c	2005-03-16 13:07:02.164390328 -0800
@@ -436,18 +436,24 @@ pcibios_enable_resources (struct pci_dev
 	u16 cmd, old_cmd;
 	int idx;
 	struct resource *r;
+	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
 
 	if (!dev)
 		return -EINVAL;
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
+	for (idx=0; idx<PCI_NUM_RESOURCES; idx++) {
 		/* Only set up the desired resources.  */
 		if (!(mask & (1 << idx)))
 			continue;
 
 		r = &dev->resource[idx];
+		if (!(r->flags & type_mask))
+			continue;
+		if ((idx == PCI_ROM_RESOURCE) &&
+				(!(r->flags & IORESOURCE_ROM_ENABLE)))
+			continue;
 		if (!r->start && r->end) {
 			printk(KERN_ERR
 			       "PCI: Device %s not available because of resource collisions\n",
@@ -459,8 +465,6 @@ pcibios_enable_resources (struct pci_dev
 		if (r->flags & IORESOURCE_MEM)
 			cmd |= PCI_COMMAND_MEMORY;
 	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
 	if (cmd != old_cmd) {
 		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
_