[DVB patch 35/48] fix CAMs on Typhoon DVB-S

Johannes Stezenbach
2005-03-22T02:01:44Z

[-- Attachment #1: dvb-ttpcibudget-typhoon-cam.patch --]
[-- Type: text/plain, Size: 2821 bytes --]

Fix for CAMs on Typhoon DVB-S, where it would constantly reset itself.
(Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>

dvb-core/dvb_ca_en50221.c | 2 +-
ttpci/budget-av.c | 13 ++++++++++++-
2 files changed, 13 insertions(+), 2 deletions(-)

Index: linux-2.6.12-rc1-mm1/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
===================================================================
--- linux-2.6.12-rc1-mm1.orig/drivers/media/dvb/dvb-core/dvb_ca_en50221.c 2005-03-21 23:27:57.000000000 +0100
+++ linux-2.6.12-rc1-mm1/drivers/media/dvb/dvb-core/dvb_ca_en50221.c 2005-03-22 00:23:49.000000000 +0100
@@ -974,7 +974,7 @@ static void dvb_ca_en50221_thread_update
if (ca->open) {
if ((!ca->slot_info[slot].da_irq_supported) ||
(!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) {
- delay = HZ / 100;
+ delay = HZ / 10;
}
}
break;
Index: linux-2.6.12-rc1-mm1/drivers/media/dvb/ttpci/budget-av.c
===================================================================
--- linux-2.6.12-rc1-mm1.orig/drivers/media/dvb/ttpci/budget-av.c 2005-03-22 00:16:28.000000000 +0100
+++ linux-2.6.12-rc1-mm1/drivers/media/dvb/ttpci/budget-av.c 2005-03-22 00:23:49.000000000 +0100
@@ -121,6 +121,8 @@ static int ciintf_read_attribute_mem(str
return -EINVAL;

saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+ udelay(1);
+
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 0xfff, 1, 0, 0);

if (result == -ETIMEDOUT)
@@ -137,6 +139,8 @@ static int ciintf_write_attribute_mem(st
return -EINVAL;

saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTHI);
+ udelay(1);
+
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 0xfff, 1, value, 0, 0);

if (result == -ETIMEDOUT)
@@ -153,6 +157,8 @@ static int ciintf_read_cam_control(struc
return -EINVAL;

saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ udelay(1);
+
result = ttpci_budget_debiread(&budget_av->budget, DEBICICAM, address & 3, 1, 0, 0);

if (result == -ETIMEDOUT)
@@ -169,6 +175,8 @@ static int ciintf_write_cam_control(stru
return -EINVAL;

saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO);
+ udelay(1);
+
result = ttpci_budget_debiwrite(&budget_av->budget, DEBICICAM, address & 3, 1, value, 0, 0);

if (result == -ETIMEDOUT)
@@ -190,7 +198,10 @@ static int ciintf_slot_reset(struct dvb_
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI);
msleep(100);
saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
- msleep(2000); /* horrendous I know, but its the only way to be absolutely sure without an IRQ line! */
+
+ int max = 20;
+ while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d)
+ msleep(100);

ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB);
return 0;

--