From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: [DVB patch 48/48] mt352: cleanups
Date: Tue, 22 Mar 2005 02:24:21 +0100 [thread overview]
Message-ID: <20050322013500.891149000@abc> (raw)
In-Reply-To: 20050322013427.919515000@abc
[-- Attachment #1: dvb-frontend-mt352-cleanup.patch --]
[-- Type: text/plain, Size: 8289 bytes --]
o remove s* from state, they are only used in read_status
o remove casting of void*
o remove FIXME in set_parameters, should be handled by dvb-core state machine
o remove some unnecessary braces
o remove #if 1 in read_status, and add note from Zarlink design manual
o change read_signal_strength to read total AGC_GAIN in case
some adapter turns on the RF_AGC loop.
(Kenneth Aafloy)
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
mt352.c | 105 +++++++++++++++++++++++-----------------------------------------
1 files changed, 39 insertions(+), 66 deletions(-)
Index: linux-2.6.12-rc1-mm1/drivers/media/dvb/frontends/mt352.c
===================================================================
--- linux-2.6.12-rc1-mm1.orig/drivers/media/dvb/frontends/mt352.c 2005-03-22 00:27:13.000000000 +0100
+++ linux-2.6.12-rc1-mm1/drivers/media/dvb/frontends/mt352.c 2005-03-22 00:30:54.000000000 +0100
@@ -42,13 +42,11 @@
struct mt352_state {
struct i2c_adapter* i2c;
+ struct dvb_frontend frontend;
struct dvb_frontend_ops ops;
/* configuration settings */
const struct mt352_config* config;
- int s0,s1,s3;
-
- struct dvb_frontend frontend;
};
static int debug;
@@ -59,7 +57,7 @@ static int debug;
static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
u8 buf[2] = { reg, val };
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0,
.buf = buf, .len = 2 };
@@ -170,7 +168,7 @@ static void mt352_calc_input_freq(struct
static int mt352_set_parameters(struct dvb_frontend* fe,
struct dvb_frontend_parameters *param)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
unsigned char buf[13];
static unsigned char tuner_go[] = { 0x5d, 0x01 };
static unsigned char fsm_go[] = { 0x5e, 0x01 };
@@ -293,20 +291,6 @@ static int mt352_set_parameters(struct d
mt352_calc_input_freq(state, buf+6);
state->config->pll_set(fe, param, buf+8);
-#if 0 /* FIXME: should be catched elsewhere ... */
- /* this dubious code which helped on some cards does not work for
- * the pinnacle 300i */
- /* Only send the tuning request if the tuner doesn't have the requested
- * parameters already set. Enhances tuning time and prevents stream
- * breakup when retuning the same transponder. */
- for (i = 1; i < 13; i++)
- if (buf[i] != mt352_read_register(state, i + 0x50))
- break;
- if (13 == i)
- /* no changes */
- return 0;
-#endif
-
mt352_write(fe, buf, sizeof(buf));
if (state->config->no_tuner) {
/* start decoding */
@@ -321,7 +305,7 @@ static int mt352_set_parameters(struct d
static int mt352_get_parameters(struct dvb_frontend* fe,
struct dvb_frontend_parameters *param)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
u16 tps;
u16 div;
u8 trl;
@@ -339,9 +323,7 @@ static int mt352_get_parameters(struct d
};
if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 )
- {
return -EINVAL;
- }
/* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because
* the mt352 sometimes works with the wrong parameters
@@ -412,17 +394,11 @@ static int mt352_get_parameters(struct d
param->frequency = ( 500 * (div - IF_FREQUENCYx6) ) / 3 * 1000;
if (trl == 0x72)
- {
op->bandwidth = BANDWIDTH_8_MHZ;
- }
else if (trl == 0x64)
- {
op->bandwidth = BANDWIDTH_7_MHZ;
- }
else
- {
op->bandwidth = BANDWIDTH_6_MHZ;
- }
if (mt352_read_register(state, STATUS_2) & 0x02)
@@ -435,41 +411,38 @@ static int mt352_get_parameters(struct d
static int mt352_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
-#if 1
- /* the pinnacle 300i loses lock if the STATUS_x registers
- * are polled too often... */
- int val;
-
- if (0 != mt352_read_register(state, INTERRUPT_0)) {
- val = mt352_read_register(state, STATUS_0);
- if (-1 != val)
- state->s0 = val;
- val = mt352_read_register(state, STATUS_1);
- if (-1 != val)
- state->s1 = val;
- val = mt352_read_register(state, STATUS_3);
- if (-1 != val)
- state->s3 = val;
- }
-#else
- state->s0 = mt352_read_register(state, STATUS_0);
- state->s1 = mt352_read_register(state, STATUS_1);
- state->s3 = mt352_read_register(state, STATUS_3);
- if (-1 == state->s0 || -1 == state->s1 || -1 == state->s3)
- return -EIO;
-#endif
+ struct mt352_state* state = fe->demodulator_priv;
+ int s0, s1, s3;
+
+ /* FIXME:
+ *
+ * The MT352 design manual from Zarlink states (page 46-47):
+ *
+ * Notes about the TUNER_GO register:
+ *
+ * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status
+ * byte is copied from the tuner to the STATUS_3 register and
+ * completion of the read operation is indicated by bit-5 of the
+ * INTERRUPT_3 register.
+ */
+
+ if ((s0 = mt352_read_register(state, STATUS_0)) < 0)
+ return -EREMOTEIO;
+ if ((s1 = mt352_read_register(state, STATUS_1)) < 0)
+ return -EREMOTEIO;
+ if ((s3 = mt352_read_register(state, STATUS_3)) < 0)
+ return -EREMOTEIO;
*status = 0;
- if (state->s0 & (1 << 4))
+ if (s0 & (1 << 4))
*status |= FE_HAS_CARRIER;
- if (state->s0 & (1 << 1))
+ if (s0 & (1 << 1))
*status |= FE_HAS_VITERBI;
- if (state->s0 & (1 << 5))
+ if (s0 & (1 << 5))
*status |= FE_HAS_LOCK;
- if (state->s1 & (1 << 1))
+ if (s1 & (1 << 1))
*status |= FE_HAS_SYNC;
- if (state->s3 & (1 << 6))
+ if (s3 & (1 << 6))
*status |= FE_HAS_SIGNAL;
if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
@@ -481,7 +454,7 @@ static int mt352_read_status(struct dvb_
static int mt352_read_ber(struct dvb_frontend* fe, u32* ber)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
*ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) |
(mt352_read_register (state, RS_ERR_CNT_1) << 8) |
@@ -492,10 +465,10 @@ static int mt352_read_ber(struct dvb_fro
static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
- u16 signal = (mt352_read_register (state, AGC_GAIN_3) << 8) |
- (mt352_read_register (state, AGC_GAIN_2));
+ u16 signal = ((mt352_read_register(state, AGC_GAIN_1) << 8) & 0x0f) |
+ (mt352_read_register(state, AGC_GAIN_0));
*strength = ~signal;
return 0;
@@ -503,7 +476,7 @@ static int mt352_read_signal_strength(st
static int mt352_read_snr(struct dvb_frontend* fe, u16* snr)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
u8 _snr = mt352_read_register (state, SNR);
*snr = (_snr << 8) | _snr;
@@ -513,7 +486,7 @@ static int mt352_read_snr(struct dvb_fro
static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
*ucblocks = (mt352_read_register (state, RS_UBC_1) << 8) |
(mt352_read_register (state, RS_UBC_0));
@@ -532,7 +505,7 @@ static int mt352_get_tune_settings(struc
static int mt352_init(struct dvb_frontend* fe)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
static u8 mt352_reset_attach [] = { RESET, 0xC0 };
@@ -551,7 +524,7 @@ static int mt352_init(struct dvb_fronten
static void mt352_release(struct dvb_frontend* fe)
{
- struct mt352_state* state = (struct mt352_state*) fe->demodulator_priv;
+ struct mt352_state* state = fe->demodulator_priv;
kfree(state);
}
@@ -563,7 +536,7 @@ struct dvb_frontend* mt352_attach(const
struct mt352_state* state = NULL;
/* allocate memory for the internal state */
- state = (struct mt352_state*) kmalloc(sizeof(struct mt352_state), GFP_KERNEL);
+ state = kmalloc(sizeof(struct mt352_state), GFP_KERNEL);
if (state == NULL) goto error;
memset(state,0,sizeof(*state));
--
prev parent reply other threads:[~2005-03-22 1:51 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-22 1:23 [DVB patch 00/48] DVB updates for 2.6.12-rc1-mm1 Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 01/48] clarify firmware upload messages Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 02/48] dibcom: frontend fixes Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 03/48] dibusb: misc. fixes Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 04/48] skystar2: remove duplicate pci_release_region() Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 05/48] mt352: Pinnacle 300i comments Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 06/48] support Activy Budget card Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 07/48] skystar2: update email address Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 08/48] ves1x93: invert_pwm fix Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 09/48] dibusb readme update Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 10/48] dibusb: support Hauppauge WinTV NOVA-T USB2 Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 11/48] nxt2002: QAM64/256 support Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 12/48] get_dvb_firmware: new unshield version Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 13/48] dib3000: corrected device naming Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 14/48] dibusb: debug changes Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 15/48] dibusb: increased the number of urbs for usb1.1 devices Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 16/48] ttusb_dec: use alternative interface to save bandwidth Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 17/48] l64781: email address fix Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 18/48] skystar2: fix MAC address reading Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 19/48] support KWorld/ADSTech Instant DVB-T USB2.0 Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 20/48] cleanups, make stuff static Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 21/48] refactor sw pid filter to drop redundant code Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 22/48] nxt2002: fix max frequency Johannes Stezenbach
2005-03-22 2:43 ` Gene Heskett
2005-03-22 1:23 ` [DVB patch 23/48] ttusb-budget: s/usb_unlink_urb/usb_kill_urb/ Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 24/48] av7110: fix Oops when av7110_ir_init() failed Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 25/48] saa7146: static initialization Johannes Stezenbach
2005-03-22 1:23 ` [DVB patch 26/48] av7110: error handling during attach Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 27/48] corrected links to firmware files Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 28/48] support pcHDTV HD2000 Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 29/48] dibusb: support nova-t usb ir Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 30/48] OREN or51211, or51132_qam and or51132_vsb firmware download info Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 31/48] ttusb_dec: IR support Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 32/48] dibusb: pll fix Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 33/48] tda10021: fix continuity errors Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 34/48] saa7146: remove duplicate setgpio Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 35/48] fix CAMs on Typhoon DVB-S Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 36/48] frontends: kfree() cleanup Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 37/48] clear up confusion between ids and adapters Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 38/48] dibusb: remove useless ifdef Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 39/48] support for Technotrend PCI DVB-T Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 40/48] dibusb: HanfTek UMT-010 fixes Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 41/48] vfree() checking cleanups Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 42/48] convert from pci_module_init to pci_register_driver Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 43/48] dibusb: support dtt200u (Yakumo/Typhoon/Hama) USB2.0 device Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 44/48] sparse warnings on one-bit bitfields Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 45/48] support Nova-S rev 2.2 Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 46/48] ttusb_dec: cleanup Johannes Stezenbach
2005-03-22 1:24 ` [DVB patch 47/48] gcc 2.95 compile fixes Johannes Stezenbach
2005-03-22 1:24 ` Johannes Stezenbach [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050322013500.891149000@abc \
--to=js@linuxtv.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox