From: Felix von Leitner <felix-linuxkernel@fefe.de>
To: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Adam Belay <abelay@novell.com>, Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, cpufreq@ZenII.linux.org.uk
Subject: Re: 2.6.11: USB broken on nforce4, ipv6 still broken, centrino speedstep even more broken than in 2.6.10
Date: Fri, 25 Mar 2005 01:17:30 +0100 [thread overview]
Message-ID: <20050325001729.GA30397@codeblau.de> (raw)
In-Reply-To: <42434E60.1060209@goop.org>
Thus spake Jeremy Fitzhardinge (jeremy@goop.org):
> Unfortunately, the Dothans *REQUIRE* some degree of ACPI support; the
> speedfreq-centrino needs to extract a table from ACPI to know what are
> valid operating (voltage/frequency) points to use for the CPU. The
> patch you're using is definitely wrong in principle, though if it works
> for you in practice then by all means use it.
I enabled these:
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
It should have worked, shouldn't it?
Well, it did not. You can look at the kernel messages at
http://dl.fefe.de/dmesg.gz if that helps.
No cpufreq, and as far as I can see, no speedstep.
The fan is running, that's all I can tell.
Felix
next prev parent reply other threads:[~2005-03-25 0:52 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-11 20:21 2.6.11: USB broken on nforce4, ipv6 still broken, centrino speedstep even more broken than in 2.6.10 Felix von Leitner
2005-03-12 1:32 ` Andrew Morton
2005-03-13 21:30 ` Felix von Leitner
2005-03-12 1:33 ` Andrew Morton
2005-03-22 0:33 ` Andrew Morton
2005-03-22 2:18 ` Johannes Stezenbach
2005-03-22 16:22 ` Johannes Stezenbach
2005-03-24 11:59 ` [PATCH] [IPV6] Fix address/interface handling according to the scoping architecture (is Re: 2.6.11: USB broken on nforce4, ipv6 still broken, centrino speedstep even more broken than in 2.6.10) YOSHIFUJI Hideaki / 吉藤英明
2005-04-25 19:57 ` IPv6 has trouble assigning an interface Felix von Leitner
2005-04-25 21:00 ` Pekka Savola
2005-04-26 6:10 ` Felix von Leitner
2005-04-27 22:57 ` Kyle Moffett
2005-04-27 23:31 ` David Stevens
2005-03-12 1:35 ` 2.6.11: USB broken on nforce4, ipv6 still broken, centrino speedstep even more broken than in 2.6.10 Andrew Morton
2005-03-12 3:54 ` Adam Belay
2005-03-22 0:32 ` Andrew Morton
2005-03-22 1:20 ` Adam Belay
2005-03-22 22:29 ` Felix von Leitner
2005-03-24 23:33 ` Jeremy Fitzhardinge
2005-03-25 0:17 ` Felix von Leitner [this message]
2005-03-25 13:37 ` Bruno Ducrot
2005-03-13 21:31 ` Felix von Leitner
2005-03-12 3:51 ` Adam Belay
[not found] <3GZyA-16B-17@gated-at.bofh.it>
2005-03-12 5:06 ` Robert Hancock
2005-03-12 5:19 ` Andrew Morton
-- strict thread matches above, loose matches on Subject: below --
2005-03-12 10:24 Stefan Rompf
2005-03-12 20:34 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050325001729.GA30397@codeblau.de \
--to=felix-linuxkernel@fefe.de \
--cc=abelay@novell.com \
--cc=akpm@osdl.org \
--cc=cpufreq@ZenII.linux.org.uk \
--cc=jeremy@goop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox