From: Andrea Arcangeli <andrea@cpushare.com>
To: Andrew Morton <akpm@osdl.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-kernel@vger.kernel.org
Subject: seccomp for ppc64
Date: Sat, 26 Mar 2005 23:49:38 +0100 [thread overview]
Message-ID: <20050326224938.GC4053@g5.random> (raw)
Hello,
This patch against 12-rc1 adds seccomp to the ppc64 arch. I tested it
successfully with the seccomp_test. I didn't bother to change the
syscall exit not to check for TIF_SECCOMP, in theory that bit could be
optimized but it's an optimization in the slow path, and current code is
a bit simpler. I also verified it still compiles and works fine on x86
and x86-64.
Instead of the TIF_32BIT redefine, if you want to change x86-64 to use
TIF_32BIT too (instead of TIF_IA32), let me know.
Thanks.
Signed-off-by: Andrea Arcangeli <andrea@cpushare.com>
--- 2.6.12/arch/ppc64/Kconfig 2005-03-25 05:13:26.000000000 +0100
+++ 2.6.12-seccomp-1/arch/ppc64/Kconfig 2005-03-26 16:38:06.000000000 +0100
@@ -273,6 +273,23 @@ config LPARCFG
Provide system capacity information via human readable
<key word>=<value> pairs through a /proc/ppc64/lparcfg interface.
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
endmenu
--- 2.6.12/arch/ppc64/kernel/ptrace.c 2005-03-08 01:01:12.000000000 +0100
+++ 2.6.12-seccomp-1/arch/ppc64/kernel/ptrace.c 2005-03-26 16:33:12.000000000 +0100
@@ -27,6 +27,7 @@
#include <linux/user.h>
#include <linux/security.h>
#include <linux/audit.h>
+#include <linux/seccomp.h>
#include <asm/uaccess.h>
#include <asm/page.h>
@@ -303,6 +304,8 @@ static void do_syscall_trace(void)
void do_syscall_trace_enter(struct pt_regs *regs)
{
+ secure_computing(regs->gpr[0]);
+
if (unlikely(current->audit_context))
audit_syscall_entry(current, regs->gpr[0],
regs->gpr[3], regs->gpr[4],
--- 2.6.12/include/asm-i386/seccomp.h 1970-01-01 01:00:00.000000000 +0100
+++ 2.6.12-seccomp-1/include/asm-i386/seccomp.h 2005-03-26 18:40:35.000000000 +0100
@@ -0,0 +1,16 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on i386"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
--- 2.6.12/include/asm-ppc64/seccomp.h 1970-01-01 01:00:00.000000000 +0100
+++ 2.6.12-seccomp-1/include/asm-ppc64/seccomp.h 2005-03-26 18:41:01.000000000 +0100
@@ -0,0 +1,21 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h> /* already defines TIF_32BIT */
+
+#ifndef TIF_32BIT
+#error "unexpected TIF_32BIT on ppc64"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
--- 2.6.12/include/asm-ppc64/thread_info.h 2005-03-08 01:02:24.000000000 +0100
+++ 2.6.12-seccomp-1/include/asm-ppc64/thread_info.h 2005-03-26 16:31:15.000000000 +0100
@@ -101,6 +101,7 @@ static inline struct thread_info *curren
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
#define TIF_MEMDIE 10
+#define TIF_SECCOMP 11 /* secure computing */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
@@ -113,7 +114,8 @@ static inline struct thread_info *curren
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
-#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
#define _TIF_USER_WORK_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \
_TIF_NEED_RESCHED)
--- 2.6.12/include/asm-x86_64/seccomp.h 1970-01-01 01:00:00.000000000 +0100
+++ 2.6.12-seccomp-1/include/asm-x86_64/seccomp.h 2005-03-26 18:54:18.000000000 +0100
@@ -0,0 +1,24 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+
+#ifdef TIF_32BIT
+#error "unexpected TIF_32BIT on x86_64"
+#else
+#define TIF_32BIT TIF_IA32
+#endif
+
+#include <linux/unistd.h>
+#include <asm/ia32_unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_ia32_read
+#define __NR_seccomp_write_32 __NR_ia32_write
+#define __NR_seccomp_exit_32 __NR_ia32_exit
+#define __NR_seccomp_sigreturn_32 __NR_ia32_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
--- 2.6.12/include/asm-x86_64/unistd.h 2005-03-25 05:13:28.000000000 +0100
+++ 2.6.12-seccomp-1/include/asm-x86_64/unistd.h 2005-03-26 19:30:09.000000000 +0100
@@ -774,7 +774,7 @@ asmlinkage long sys_pipe(int *fildes);
asmlinkage long sys_ptrace(long request, long pid,
unsigned long addr, long data);
-asmlinkage long sys_iopl(unsigned int level, struct pt_regs regs);
+asmlinkage long sys_iopl(unsigned int level, struct pt_regs *regs);
asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on);
struct sigaction;
asmlinkage long sys_rt_sigaction(int sig,
--- 2.6.12/include/linux/seccomp.h 2005-03-25 05:13:28.000000000 +0100
+++ 2.6.12-seccomp-1/include/linux/seccomp.h 2005-03-26 23:30:59.000000000 +0100
@@ -8,6 +8,7 @@
#define NR_SECCOMP_MODES 1
#include <linux/thread_info.h>
+#include <asm/seccomp.h>
typedef struct { int mode; } seccomp_t;
--- 2.6.12/kernel/seccomp.c 2005-03-25 05:13:28.000000000 +0100
+++ 2.6.12-seccomp-1/kernel/seccomp.c 2005-03-26 23:33:28.000000000 +0100
@@ -8,10 +8,6 @@
#include <linux/seccomp.h>
#include <linux/sched.h>
-#include <asm/unistd.h>
-#ifdef TIF_IA32
-#include <asm/ia32_unistd.h>
-#endif
/* #define SECCOMP_DEBUG 1 */
@@ -21,27 +17,13 @@
* to limit the stack allocations too.
*/
static int mode1_syscalls[] = {
- __NR_read, __NR_write, __NR_exit,
- /*
- * Allow either sigreturn or rt_sigreturn, newer archs
- * like x86-64 only defines __NR_rt_sigreturn.
- */
-#ifdef __NR_sigreturn
- __NR_sigreturn,
-#else
- __NR_rt_sigreturn,
-#endif
+ __NR_seccomp_read, __NR_seccomp_write, __NR_seccomp_exit, __NR_seccomp_sigreturn,
0, /* null terminated */
};
-#ifdef TIF_IA32
-static int mode1_syscalls_32bit[] = {
- __NR_ia32_read, __NR_ia32_write, __NR_ia32_exit,
- /*
- * Allow either sigreturn or rt_sigreturn, newer archs
- * like x86-64 only defines __NR_rt_sigreturn.
- */
- __NR_ia32_sigreturn,
+#ifdef TIF_32BIT
+static int mode1_syscalls_32[] = {
+ __NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
0, /* null terminated */
};
#endif
@@ -54,9 +36,9 @@ void __secure_computing(int this_syscall
switch (mode) {
case 1:
syscall = mode1_syscalls;
-#ifdef TIF_IA32
- if (test_thread_flag(TIF_IA32))
- syscall = mode1_syscalls_32bit;
+#ifdef TIF_32BIT
+ if (test_thread_flag(TIF_32BIT))
+ syscall = mode1_syscalls_32;
#endif
do {
if (*syscall == this_syscall)
reply other threads:[~2005-03-27 5:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050326224938.GC4053@g5.random \
--to=andrea@cpushare.com \
--cc=akpm@osdl.org \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox