From: Adrian Bunk <bunk@stusta.de>
To: James.Bottomley@SteelEye.com
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] SCSI: cleanups
Date: Sun, 27 Mar 2005 22:21:39 +0200 [thread overview]
Message-ID: <20050327202139.GQ4285@stusta.de> (raw)
This patch contains the following cleanups:
- make needlessly global code static
- remove the following unused functions:
- scsi.h: print_driverbyte
- scsi.h: print_hostbyte
- #if 0 the following unused functions:
- constants.c: scsi_print_hostbyte
- constants.c: scsi_print_driverbyte
- remove the following unneeded EXPORT_SYMBOL's:
- hosts.c: scsi_host_lookup
- scsi.c: scsi_device_cancel
- scsi_lib.c: scsi_device_resume
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/scsi/constants.c | 4 ++++
drivers/scsi/hosts.c | 3 +--
drivers/scsi/scsi.c | 7 ++++---
drivers/scsi/scsi.h | 8 --------
drivers/scsi/scsi_debug.c | 2 +-
drivers/scsi/scsi_lib.c | 5 ++---
drivers/scsi/scsi_priv.h | 4 ----
drivers/scsi/scsi_sysfs.c | 5 ++---
include/scsi/scsi_dbg.h | 2 --
include/scsi/scsi_device.h | 1 -
10 files changed, 14 insertions(+), 27 deletions(-)
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi.h.old 2005-02-28 18:18:22.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi.h 2005-03-01 00:58:19.000000000 +0100
@@ -80,14 +80,6 @@
{
return scsi_print_req_sense(devclass, req);
}
-static inline void print_driverbyte(int scsiresult)
-{
- return scsi_print_driverbyte(scsiresult);
-}
-static inline void print_hostbyte(int scsiresult)
-{
- return scsi_print_hostbyte(scsiresult);
-}
static inline void print_status(unsigned char status)
{
return scsi_print_status(status);
--- linux-2.6.11-rc4-mm1-full/include/scsi/scsi_dbg.h.old 2005-02-28 18:17:32.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/include/scsi/scsi_dbg.h 2005-03-01 01:01:25.000000000 +0100
@@ -11,8 +11,6 @@
extern void __scsi_print_sense(const char *name,
const unsigned char *sense_buffer,
int sense_len);
-extern void scsi_print_driverbyte(int);
-extern void scsi_print_hostbyte(int);
extern void scsi_print_status(unsigned char);
extern int scsi_print_msg(const unsigned char *);
extern const char *scsi_sense_key_string(unsigned char);
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/constants.c.old 2005-02-28 18:17:46.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/constants.c 2005-03-01 01:00:37.000000000 +0100
@@ -1393,6 +1393,8 @@
}
EXPORT_SYMBOL(scsi_print_command);
+#if 0
+
#ifdef CONFIG_SCSI_CONSTANTS
static const char * hostbyte_table[]={
@@ -1446,3 +1448,5 @@
printk("Driverbyte=0x%02x ", driver_byte(scsiresult));
}
#endif
+
+#endif /* 0 */
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/hosts.c.old 2005-02-28 18:33:14.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/hosts.c 2005-03-01 00:58:19.000000000 +0100
@@ -56,7 +56,7 @@
* @shost: pointer to struct Scsi_Host
* recovery: recovery requested to run.
**/
-void scsi_host_cancel(struct Scsi_Host *shost, int recovery)
+static void scsi_host_cancel(struct Scsi_Host *shost, int recovery)
{
struct scsi_device *sdev;
@@ -362,7 +362,6 @@
return shost;
}
-EXPORT_SYMBOL(scsi_host_lookup);
/**
* scsi_host_get - inc a Scsi_Host ref count
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_priv.h.old 2005-02-28 19:59:30.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_priv.h 2005-03-01 00:58:19.000000000 +0100
@@ -66,8 +66,6 @@
extern int scsi_dispatch_cmd(struct scsi_cmnd *cmd);
extern int scsi_setup_command_freelist(struct Scsi_Host *shost);
extern void scsi_destroy_command_freelist(struct Scsi_Host *shost);
-extern void scsi_done(struct scsi_cmnd *cmd);
-extern int scsi_retry_command(struct scsi_cmnd *cmd);
extern int scsi_insert_special_req(struct scsi_request *sreq, int);
extern void scsi_init_cmd_from_req(struct scsi_cmnd *cmd,
struct scsi_request *sreq);
@@ -141,7 +139,6 @@
#endif /* CONFIG_SYSCTL */
/* scsi_sysfs.c */
-extern void scsi_device_dev_release(struct device *);
extern int scsi_sysfs_add_sdev(struct scsi_device *);
extern int scsi_sysfs_add_host(struct Scsi_Host *);
extern int scsi_sysfs_register(void);
@@ -150,7 +147,6 @@
extern int scsi_sysfs_target_initialize(struct scsi_device *);
extern struct scsi_transport_template blank_transport_template;
-extern struct class sdev_class;
extern struct bus_type scsi_bus_type;
/*
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi.c.old 2005-02-28 19:59:56.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi.c 2005-03-01 00:58:19.000000000 +0100
@@ -68,6 +68,8 @@
#include "scsi_priv.h"
#include "scsi_logging.h"
+static void scsi_done(struct scsi_cmnd *cmd);
+static int scsi_retry_command(struct scsi_cmnd *cmd);
/*
* Definitions and constants.
@@ -733,7 +735,7 @@
*
* This function is interrupt context safe.
*/
-void scsi_done(struct scsi_cmnd *cmd)
+static void scsi_done(struct scsi_cmnd *cmd)
{
/*
* We don't have to worry about this one timing out any more.
@@ -829,7 +831,7 @@
* level drivers should not become re-entrant as a result of
* this.
*/
-int scsi_retry_command(struct scsi_cmnd *cmd)
+static int scsi_retry_command(struct scsi_cmnd *cmd)
{
/*
* Restore the SCSI command state.
@@ -1215,7 +1217,6 @@
return 0;
}
-EXPORT_SYMBOL(scsi_device_cancel);
#ifdef CONFIG_HOTPLUG_CPU
static int scsi_cpu_notify(struct notifier_block *self,
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_debug.c.old 2005-02-28 20:22:08.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_debug.c 2005-03-01 00:58:19.000000000 +0100
@@ -1783,7 +1783,7 @@
device_initcall(scsi_debug_init);
module_exit(scsi_debug_exit);
-void pseudo_0_release(struct device * dev)
+static void pseudo_0_release(struct device * dev)
{
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: pseudo_0_release() called\n");
--- linux-2.6.11-rc4-mm1-full/include/scsi/scsi_device.h.old 2005-02-28 20:14:08.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/include/scsi/scsi_device.h 2005-03-01 00:58:19.000000000 +0100
@@ -223,7 +223,6 @@
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
extern int scsi_device_quiesce(struct scsi_device *sdev);
-extern void scsi_device_resume(struct scsi_device *sdev);
extern void scsi_target_quiesce(struct scsi_target *);
extern void scsi_target_resume(struct scsi_target *);
extern const char *scsi_device_state_name(enum scsi_device_state);
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_lib.c.old 2005-02-28 20:14:23.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_lib.c 2005-03-01 00:58:19.000000000 +0100
@@ -44,7 +44,7 @@
#endif
#define SP(x) { x, "sgpool-" #x }
-struct scsi_host_sg_pool scsi_sg_pools[] = {
+static struct scsi_host_sg_pool scsi_sg_pools[] = {
SP(8),
SP(16),
SP(32),
@@ -1817,14 +1817,13 @@
*
* Must be called with user context, may sleep.
**/
-void
+static void
scsi_device_resume(struct scsi_device *sdev)
{
if(scsi_device_set_state(sdev, SDEV_RUNNING))
return;
scsi_run_queue(sdev->request_queue);
}
-EXPORT_SYMBOL(scsi_device_resume);
static void
device_quiesce_fn(struct scsi_device *sdev, void *data)
--- linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_sysfs.c.old 2005-02-28 20:19:41.000000000 +0100
+++ linux-2.6.11-rc4-mm1-full/drivers/scsi/scsi_sysfs.c 2005-03-01 00:58:19.000000000 +0100
@@ -150,7 +150,7 @@
put_device(&sdev->sdev_gendev);
}
-void scsi_device_dev_release(struct device *dev)
+static void scsi_device_dev_release(struct device *dev)
{
struct scsi_device *sdev;
struct device *parent;
@@ -188,7 +188,7 @@
put_device(parent);
}
-struct class sdev_class = {
+static struct class sdev_class = {
.name = "scsi_device",
.release = scsi_device_cls_release,
};
next reply other threads:[~2005-03-27 20:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-27 20:21 Adrian Bunk [this message]
2005-03-28 15:21 ` [2.6 patch] SCSI: cleanups James Bottomley
2005-03-28 15:29 ` Arjan van de Ven
2005-03-28 16:00 ` James Bottomley
2005-03-31 21:07 ` Adrian Bunk
2005-04-23 22:14 ` [2.6 patch] SCSI: make code static Adrian Bunk
-- strict thread matches above, loose matches on Subject: below --
2005-02-28 21:31 [2.6 patch] SCSI: possible cleanups Adrian Bunk
2005-02-28 22:25 ` Christoph Hellwig
2005-02-28 23:01 ` Adrian Bunk
2005-02-28 23:34 ` Christoph Hellwig
2005-03-01 0:31 ` [2.6 patch] SCSI: cleanups Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050327202139.GQ4285@stusta.de \
--to=bunk@stusta.de \
--cc=James.Bottomley@SteelEye.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox