From: Ed Tomlinson <tomlins@cam.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.12-rc2-mm1
Date: Wed, 6 Apr 2005 20:40:21 -0400 [thread overview]
Message-ID: <200504062040.21393.tomlins@cam.org> (raw)
In-Reply-To: <20050405000524.592fc125.akpm@osdl.org>
On Tuesday 05 April 2005 03:05, Andrew Morton wrote:
> - x86 NMI handling seems to be bust in 2.6.12-rc2. Try using
> `nmi_watchdog=0' if you experience weird crashes.
>
> - The possible kernel-timer related hangs might possibly be fixed. We
> haven't heard yet.
>
> - Nobody said anything about the PM resume and DRI behaviour in
> 2.6.12-rc1-mm4. So it's all perfect now?
>
> - Various fixes and updates. Nothing earth-shattering.
This refuses to boot here. It dies when assigning the EHCI driver. The mb is an MSI-7030 K8N Neo Platinium
based on a nForce 3 250Gb Chipset (x86_64). I`ve been on vacation - the last kernel tried was 11-mm3 which
booted fine but refuses to use all the usb ports supplied by the system (two work, three do not all using low
speed).
Any ideas what might be happening?
Ed Tomlinson
next prev parent reply other threads:[~2005-04-07 0:40 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-05 7:05 2.6.12-rc2-mm1 Andrew Morton
2005-04-05 7:21 ` 2.6.12-rc2-mm1 Dave Airlie
2005-04-05 7:33 ` 2.6.12-rc2-mm1 Nick Piggin
2005-04-05 7:59 ` 2.6.12-rc2-mm1 Ingo Molnar
2005-04-05 18:51 ` 2.6.12-rc2-mm1 Siddha, Suresh B
2005-04-05 23:42 ` 2.6.12-rc2-mm1 Nick Piggin
2005-04-06 17:11 ` 2.6.12-rc2-mm1 Nick Piggin
2005-04-08 1:08 ` 2.6.12-rc2-mm1 Siddha, Suresh B
2005-04-08 2:28 ` 2.6.12-rc2-mm1 Nick Piggin
2005-04-05 7:39 ` 2.6.12-rc2-mm1 Brice Goglin
2005-04-05 7:45 ` 2.6.12-rc2-mm1 Andrew Morton
2005-04-05 7:59 ` 2.6.12-rc2-mm1 Brice Goglin
2005-04-05 8:05 ` 2.6.12-rc2-mm1 Andrew Morton
2005-04-07 17:00 ` 2.6.12-rc2-mm1 - printk timing broken Damir Perisa
2005-04-05 8:30 ` 2.6.12-rc2-mm1 Ingo Molnar
2005-04-05 8:40 ` 2.6.12-rc2-mm1 Brice Goglin
2005-04-05 18:34 ` 2.6.12-rc2-mm1 Ingo Molnar
2005-04-06 9:09 ` 2.6.12-rc2-mm1 Brice Goglin
2005-04-05 7:44 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 9:07 ` 2.6.12-rc2-mm1 Dave Airlie
2005-04-05 9:20 ` 2.6.12-rc2-mm1 Paul Mackerras
2005-04-05 9:25 ` 2.6.12-rc2-mm1 Dave Airlie
2005-04-05 9:30 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 9:44 ` 2.6.12-rc2-mm1 Paul Mackerras
2005-04-05 9:45 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 9:51 ` 2.6.12-rc2-mm1 Paul Mackerras
2005-04-05 9:54 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 9:58 ` 2.6.12-rc2-mm1 Dave Airlie
2005-04-05 10:03 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 9:58 ` 2.6.12-rc2-mm1 Paul Mackerras
2005-04-05 9:33 ` 2.6.12-rc2-mm1 Arjan van de Ven
2005-04-05 9:11 ` 2.6.12-rc2-mm1 Paul Mackerras
2005-04-05 9:12 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 9:35 ` 2.6.12-rc2-mm1 Paul Mackerras
2005-04-05 9:36 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 7:45 ` 2.6.12-rc2-mm1 Christoph Hellwig
2005-04-05 7:51 ` 2.6.12-rc2-mm1 Andrew Morton
2005-04-05 16:48 ` 2.6.12-rc2-mm1 David Woodhouse
2005-04-05 8:18 ` 2.6.12-rc2-mm1 Brice Goglin
2005-04-05 8:46 ` 2.6.12-rc2-mm1 Rafael J. Wysocki
2005-04-05 10:08 ` 2.6.12-rc2-mm1 Jindrich Makovicka
2005-04-06 22:07 ` 2.6.12-rc2-mm1 Andrew Morton
2005-04-05 10:18 ` 2.6.12-rc2-mm1 Andrey Panin
2005-04-05 12:21 ` [-mm patch] Makefile: fix spaces instead of tab Adrian Bunk
2005-04-05 13:19 ` Sam Ravnborg
2005-04-05 12:40 ` 2.6.12-rc2-mm1 Borislav Petkov
2005-04-05 13:44 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-05 14:14 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-05 22:03 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-06 0:56 ` 2.6.12-rc2-mm1 Andrew Morton
2005-04-06 7:19 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-06 12:59 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-06 21:27 ` 2.6.12-rc2-mm1 Andrew Morton
2005-04-07 3:06 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-07 6:55 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-08 10:33 ` 2.6.12-rc2-mm1 Pavel Machek
2005-04-10 21:18 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-10 21:27 ` 2.6.12-rc2-mm1 Pavel Machek
2005-04-10 22:57 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-10 23:00 ` 2.6.12-rc2-mm1 Pavel Machek
2005-04-11 4:31 ` 2.6.12-rc2-mm1 Barry K. Nathan
2005-04-11 10:57 ` swsusp vs. xfs [was Re: 2.6.12-rc2-mm1] Pavel Machek
2005-04-11 23:12 ` [xfs-masters] " Nathan Scott
2005-04-11 23:51 ` Pavel Machek
2005-04-12 0:26 ` Nathan Scott
2005-04-12 11:04 ` Pavel Machek
2005-04-12 11:50 ` Barry K. Nathan
2005-04-12 12:47 ` Rafael J. Wysocki
2005-04-11 7:38 ` 2.6.12-rc2-mm1 Stefan Seyfried
2005-04-05 14:24 ` [-mm patch] drivers/infiniband/hw/mthca/mthca_main.c: remove an unused label Adrian Bunk
2005-04-05 14:37 ` Hal Rosenstock
2005-04-05 16:53 ` Roland Dreier
2005-04-05 15:45 ` 2.6.12-rc2-mm1 Jan Dittmer
2005-04-05 21:38 ` 2.6.12-rc2-mm1 Sam Ravnborg
2005-04-05 17:11 ` 2.6.12-rc2-mm1 Christophe Saout
2005-04-06 1:44 ` 2.6.12-rc2-mm1 Neil Brown
2005-04-06 22:19 ` 2.6.12-rc2-mm1 Andrew Morton
2005-04-07 0:40 ` Ed Tomlinson [this message]
2005-04-07 7:14 ` 2.6.12-rc2-mm1 Mickael Marchand
2005-04-08 18:13 ` [-mm patch] x86_64: kill obsolete check_nmi_watchdog prototype Adrian Bunk
2005-04-08 18:21 ` Mickael Marchand
[not found] <fa.gcqu6i7.1o6qrhn@ifi.uio.no>
2005-04-05 8:34 ` 2.6.12-rc2-mm1 Reuben Farrelly
2005-04-05 12:14 ` 2.6.12-rc2-mm1 Adrian Bunk
2005-04-05 12:32 ` 2.6.12-rc2-mm1 Reuben Farrelly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504062040.21393.tomlins@cam.org \
--to=tomlins@cam.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox