public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Adrian Bunk <bunk@stusta.de>
To: luc@saillard.org
Cc: linux-kernel@vger.kernel.org, gregkh@suse.de,
	linux-usb-devel@lists.sourceforge.net
Subject: [2.6 patch] drivers/usb/media/pwc/: make code static
Date: Mon, 18 Apr 2005 23:47:38 +0200	[thread overview]
Message-ID: <20050418214738.GE5489@stusta.de> (raw)
In-Reply-To: <20050418020455.GB3625@stusta.de>

This patch lacked a small bit.

Updated patch below.

cu
Adrian


<--  snip  -->


This patch makes needlessly global code static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 drivers/usb/media/pwc/pwc-ctrl.c |   78 +++++++++++++++----------------
 drivers/usb/media/pwc/pwc-if.c   |    2 
 drivers/usb/media/pwc/pwc.h      |    6 --
 3 files changed, 41 insertions(+), 45 deletions(-)

--- linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc.h.old	2005-04-18 03:11:14.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc.h	2005-04-18 03:13:28.000000000 +0200
@@ -226,9 +226,8 @@
 extern "C" {
 #endif
 
-/* Global variables */
+/* Global variable */
 extern int pwc_trace;
-extern int pwc_preferred_compression;
 
 /** functions in pwc-if.c */
 int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot);
@@ -243,8 +242,6 @@
 /** Functions in pwc-ctrl.c */
 /* Request a certain video mode. Returns < 0 if not possible */
 extern int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frames, int compression, int snapshot);
-/* Calculate the number of bytes per image (not frame) */
-extern void pwc_set_image_buffer_size(struct pwc_device *pdev);
 
 /* Various controls; should be obvious. Value 0..65535, or < 0 on error */
 extern int pwc_get_brightness(struct pwc_device *pdev);
@@ -256,7 +253,6 @@
 extern int pwc_get_saturation(struct pwc_device *pdev);
 extern int pwc_set_saturation(struct pwc_device *pdev, int value);
 extern int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value);
-extern int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value);
 extern int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor);
 
 /* Power down or up the camera; not supported by all models */
--- linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-ctrl.c.old	2005-04-18 03:11:29.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-ctrl.c	2005-04-18 22:57:34.000000000 +0200
@@ -418,6 +418,44 @@
 
 
 
+static void pwc_set_image_buffer_size(struct pwc_device *pdev)
+{
+	int i, factor = 0, filler = 0;
+
+	/* for PALETTE_YUV420P */
+	switch(pdev->vpalette)
+	{
+	case VIDEO_PALETTE_YUV420P:
+		factor = 6;
+		filler = 128;
+		break;
+	case VIDEO_PALETTE_RAW:
+		factor = 6; /* can be uncompressed YUV420P */
+		filler = 0;
+		break;
+	}
+
+	/* Set sizes in bytes */
+	pdev->image.size = pdev->image.x * pdev->image.y * factor / 4;
+	pdev->view.size  = pdev->view.x  * pdev->view.y  * factor / 4;
+
+	/* Align offset, or you'll get some very weird results in
+	   YUV420 mode... x must be multiple of 4 (to get the Y's in
+	   place), and y even (or you'll mixup U & V). This is less of a
+	   problem for YUV420P.
+	 */
+	pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
+	pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
+
+	/* Fill buffers with gray or black */
+	for (i = 0; i < MAX_IMAGES; i++) {
+		if (pdev->image_ptr[i] != NULL)
+			memset(pdev->image_ptr[i], filler, pdev->view.size);
+	}
+}
+
+
+
 /**
    @pdev: device structure
    @width: viewport width
@@ -475,44 +513,6 @@
 }
 
 
-void pwc_set_image_buffer_size(struct pwc_device *pdev)
-{
-	int i, factor = 0, filler = 0;
-
-	/* for PALETTE_YUV420P */
-	switch(pdev->vpalette)
-	{
-	case VIDEO_PALETTE_YUV420P:
-		factor = 6;
-		filler = 128;
-		break;
-	case VIDEO_PALETTE_RAW:
-		factor = 6; /* can be uncompressed YUV420P */
-		filler = 0;
-		break;
-	}
-
-	/* Set sizes in bytes */
-	pdev->image.size = pdev->image.x * pdev->image.y * factor / 4;
-	pdev->view.size  = pdev->view.x  * pdev->view.y  * factor / 4;
-
-	/* Align offset, or you'll get some very weird results in
-	   YUV420 mode... x must be multiple of 4 (to get the Y's in
-	   place), and y even (or you'll mixup U & V). This is less of a
-	   problem for YUV420P.
-	 */
-	pdev->offset.x = ((pdev->view.x - pdev->image.x) / 2) & 0xFFFC;
-	pdev->offset.y = ((pdev->view.y - pdev->image.y) / 2) & 0xFFFE;
-
-	/* Fill buffers with gray or black */
-	for (i = 0; i < MAX_IMAGES; i++) {
-		if (pdev->image_ptr[i] != NULL)
-			memset(pdev->image_ptr[i], filler, pdev->view.size);
-	}
-}
-
-
-
 /* BRIGHTNESS */
 
 int pwc_get_brightness(struct pwc_device *pdev)
@@ -949,7 +949,7 @@
 	return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
 }
 
-int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
+static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
 {
 	unsigned char buf[2];
 	int ret;
--- linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-if.c.old	2005-04-18 03:13:37.000000000 +0200
+++ linux-2.6.12-rc2-mm3-full/drivers/usb/media/pwc/pwc-if.c	2005-04-18 03:13:53.000000000 +0200
@@ -129,7 +129,7 @@
        int pwc_trace = TRACE_MODULE | TRACE_FLOW | TRACE_PWCX;
 static int power_save = 0;
 static int led_on = 100, led_off = 0; /* defaults to LED that is on while in use */
-       int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */
+static int pwc_preferred_compression = 2; /* 0..3 = uncompressed..high */
 static struct {
 	int type;
 	char serial_number[30];

  reply	other threads:[~2005-04-18 21:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-18  2:04 [2.6 patch] drivers/usb/media/pwc/: make code static Adrian Bunk
2005-04-18 21:47 ` Adrian Bunk [this message]
2005-04-22 21:14   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050418214738.GE5489@stusta.de \
    --to=bunk@stusta.de \
    --cc=gregkh@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb-devel@lists.sourceforge.net \
    --cc=luc@saillard.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox