From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
To: Linus Torvalds <torvalds@osdl.org>, Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org,
Bjorn Helgaas <bjorn.helgaas@hp.com>,
Ashok Raj <ashok.raj@intel.com>
Subject: [PATCH] PC300 pci_enable_device fix
Date: Tue, 26 Apr 2005 11:41:57 -0300 [thread overview]
Message-ID: <20050426144157.GB31915@logos.cnet> (raw)
Call pci_enable_device() before looking at IRQ and resources,
and pci_disable_device() when shutting the interface down.
The driver requires this fix or the "pci=routeirq" workaround
on 2.6.10 and later kernels.
Reported and tested by Artur Lipowski.
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Index: drivers/net/wan/pc300_drv.c
===================================================================
--- 5b6486ded5188e41ac9bc81ad4a5e2bd746f7ede/drivers/net/wan/pc300_drv.c (mode:100644 sha1:d67be2587d4d33879d479f331ad4cb9d3ac33f75)
+++ uncommitted/drivers/net/wan/pc300_drv.c (mode:100664)
@@ -3427,7 +3427,7 @@
{
static int first_time = 1;
ucchar cpc_rev_id;
- int err = 0, eeprom_outdated = 0;
+ int err, eeprom_outdated = 0;
ucshort device_id;
pc300_t *card;
@@ -3439,15 +3439,21 @@
#endif
}
+ if ((err = pci_enable_device(pdev)) < 0)
+ return err;
+
card = (pc300_t *) kmalloc(sizeof(pc300_t), GFP_KERNEL);
if (card == NULL) {
printk("PC300 found at RAM 0x%08lx, "
"but could not allocate card structure.\n",
pci_resource_start(pdev, 3));
- return -ENOMEM;
+ err = -ENOMEM;
+ goto err_disable_dev;
}
memset(card, 0, sizeof(pc300_t));
+ err = -ENODEV;
+
/* read PCI configuration area */
device_id = ent->device;
card->hw.irq = pdev->irq;
@@ -3507,7 +3513,6 @@
printk("PC300 found at RAM 0x%08x, "
"but could not allocate PLX mem region.\n",
card->hw.ramphys);
- err = -ENODEV;
goto err_release_io;
}
if (!request_mem_region(card->hw.ramphys, card->hw.alloc_ramsize,
@@ -3515,7 +3520,6 @@
printk("PC300 found at RAM 0x%08x, "
"but could not allocate RAM mem region.\n",
card->hw.ramphys);
- err = -ENODEV;
goto err_release_plx;
}
if (!request_mem_region(card->hw.scaphys, card->hw.scasize,
@@ -3523,13 +3527,9 @@
printk("PC300 found at RAM 0x%08x, "
"but could not allocate SCA mem region.\n",
card->hw.ramphys);
- err = -ENODEV;
goto err_release_ram;
}
- if ((err = pci_enable_device(pdev)) != 0)
- goto err_release_sca;
-
card->hw.plxbase = ioremap(card->hw.plxphys, card->hw.plxsize);
card->hw.rambase = ioremap(card->hw.ramphys, card->hw.alloc_ramsize);
card->hw.scabase = ioremap(card->hw.scaphys, card->hw.scasize);
@@ -3619,7 +3619,6 @@
iounmap(card->hw.falcbase);
release_mem_region(card->hw.falcphys, card->hw.falcsize);
}
-err_release_sca:
release_mem_region(card->hw.scaphys, card->hw.scasize);
err_release_ram:
release_mem_region(card->hw.ramphys, card->hw.alloc_ramsize);
@@ -3628,7 +3627,9 @@
err_release_io:
release_region(card->hw.iophys, card->hw.iosize);
kfree(card);
- return -ENODEV;
+err_disable_dev:
+ pci_disable_device(pdev);
+ return err;
}
static void __devexit cpc_remove_one(struct pci_dev *pdev)
@@ -3662,6 +3663,7 @@
if (card->hw.irq)
free_irq(card->hw.irq, card);
kfree(card);
+ pci_disable_device(pdev);
}
}
next reply other threads:[~2005-04-26 19:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-26 14:41 Marcelo Tosatti [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-04-13 21:31 [PATCH] PC300 pci_enable_device fix Bjorn Helgaas
2005-04-13 22:02 ` Ashok Raj
2005-04-13 19:45 ` Marcelo Tosatti
2005-04-14 12:39 ` Marcelo Tosatti
2005-04-14 18:17 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050426144157.GB31915@logos.cnet \
--to=marcelo.tosatti@cyclades.com \
--cc=akpm@osdl.org \
--cc=ashok.raj@intel.com \
--cc=bjorn.helgaas@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox