Re: SATA/ATAPI

["Tais M. Hansen" <tais.hansen@osd.dk>]

[-- Attachment #1: Type: text/plain, Size: 1305 bytes --]

On Tuesday 26 April 2005 23:17, Andy Stewart wrote:
> I have a patch that partially solves this situation.  My patch allows
> the SATA ATAPI device to be seen, mounted, umounted, and read without
> problem.  Writes to the device fail miserably, and I haven't debugged
> that yet.  Also, the use of the 'dd' command with my patch works unless
> 'dd' is allowed to read off the end of the CD, in which case there is a
> kernel oops (easily reproduced, and I've not yet debugged that failure,
> but I have a theory).
> Since my patch isn't a complete solution, I haven't told anybody about
> it until now.  However, if you are interested in my patch despite its
> limitations, please let me know, and I'll be happy to share it with you.
>   My work was done with the 2.6.11.5 kernel and is limited to one or two
> files, if I recall correctly.

I'd very much like to see what you came up with. I'm currently playing with 
2.6.11.7 but I doubt there's much difference in this area from .5.

-- 
Regards,
Tais M. Hansen
OSD

___________________________________________________________
"If people had understood how patents would be granted when most of today's 
ideas were invented and had taken out patents, the industry would be at a 
complete standstill today." -Bill Gates (1991)

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]