From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: [DVB patch 01/37] support for TT/Hauppauge Nexus-S Rev 2.3
Date: Sun, 08 May 2005 20:42:30 +0200 [thread overview]
Message-ID: <20050508184345.178661000@abc> (raw)
In-Reply-To: 20050508184229.957247000@abc
[-- Attachment #1: dvb-ttpci-nexus23.patch --]
[-- Type: text/plain, Size: 5438 bytes --]
Support for TT/Hauppauge Nexus-S Rev 2.3 (Oliver Endriss)
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
---
drivers/media/dvb/ttpci/av7110.c | 116 +++++++++++++++++++++++++++++++++++++--
1 files changed, 113 insertions(+), 3 deletions(-)
Index: linux-2.6.12-rc4/drivers/media/dvb/ttpci/av7110.c
===================================================================
--- linux-2.6.12-rc4.orig/drivers/media/dvb/ttpci/av7110.c 2005-05-08 18:23:20.000000000 +0200
+++ linux-2.6.12-rc4/drivers/media/dvb/ttpci/av7110.c 2005-05-08 20:24:35.000000000 +0200
@@ -1673,6 +1673,106 @@ static struct stv0299_config alps_bsru6_
};
+static u8 alps_bsbe1_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x30,
+ 0x03, 0x00,
+ 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+ 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
+ 0x06, 0x40, /* DAC not used, set to high impendance mode */
+ 0x07, 0x00, /* DAC LSB */
+ 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
+ 0x09, 0x00, /* FIFO */
+ 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+ 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
+ 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
+ 0x10, 0x3f, // AGC2 0x3d
+ 0x11, 0x84,
+ 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
+ 0x15, 0xc9, // lock detector threshold
+ 0x16, 0x00,
+ 0x17, 0x00,
+ 0x18, 0x00,
+ 0x19, 0x00,
+ 0x1a, 0x00,
+ 0x1f, 0x50,
+ 0x20, 0x00,
+ 0x21, 0x00,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
+ 0x29, 0x1e, // 1/2 threshold
+ 0x2a, 0x14, // 2/3 threshold
+ 0x2b, 0x0f, // 3/4 threshold
+ 0x2c, 0x09, // 5/6 threshold
+ 0x2d, 0x05, // 7/8 threshold
+ 0x2e, 0x01,
+ 0x31, 0x1f, // test all FECs
+ 0x32, 0x19, // viterbi and synchro search
+ 0x33, 0xfc, // rs control
+ 0x34, 0x93, // error control
+ 0x0f, 0x92,
+ 0xff, 0xff
+};
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
+{
+ struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+ int ret;
+ u8 data[4];
+ u32 div;
+ struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if ((params->frequency < 950000) || (params->frequency > 2150000))
+ return -EINVAL;
+
+ div = (params->frequency + (125 - 1)) / 125; // round correctly
+ data[0] = (div >> 8) & 0x7f;
+ data[1] = div & 0xff;
+ data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+ data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+ ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .enhanced_tuning = 0,
+ .skip_reinit = 0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+ .pll_set = alps_bsbe1_pll_set,
+};
+
+static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
+ int ret;
+ u8 data[1];
+ struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
+
+ switch(voltage) {
+ case SEC_VOLTAGE_OFF:
+ data[0] = 0x00;
+ break;
+ case SEC_VOLTAGE_13:
+ data[0] = 0x44;
+ break;
+ case SEC_VOLTAGE_18:
+ data[0] = 0x4c;
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
@@ -2116,6 +2216,14 @@ static int frontend_init(struct av7110 *
av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
break;
}
+ break;
+
+ case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */
+ /* ALPS BSBE1 */
+ av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap);
+ if (av7110->fe)
+ av7110->fe->ops->set_voltage = lnbp21_set_voltage;
+ break;
}
}
@@ -2672,21 +2780,23 @@ MAKE_AV7110_INFO(ttt_1_X, "Technotren
MAKE_AV7110_INFO(ttc_1_X, "Technotrend/Hauppauge WinTV Nexus-CA rev1.X");
MAKE_AV7110_INFO(ttc_2_X, "Technotrend/Hauppauge WinTV DVB-C rev2.X");
MAKE_AV7110_INFO(tts_2_X, "Technotrend/Hauppauge WinTV Nexus-S rev2.X");
+MAKE_AV7110_INFO(tts_2_3, "Technotrend/Hauppauge WinTV Nexus-S rev2.3");
MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T");
MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C");
MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6");
static struct pci_device_id pci_tbl[] = {
+ MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
MAKE_EXTENSION_PCI(tts_1_X, 0x13c2, 0x0000),
MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001),
MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002),
MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003),
- MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
- MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
- MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006),
MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008),
+ MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
+ MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e),
+ MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
--
next prev parent reply other threads:[~2005-05-08 19:56 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-08 18:42 [DVB patch 00/37] DVB updates for 2.6.12-rc4 Johannes Stezenbach
2005-05-08 18:42 ` Johannes Stezenbach [this message]
2005-05-08 18:42 ` [DVB patch 02/37] saa7146: no need to initialize static/global variables to 0 Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 03/37] dvb_frontend: fix module param Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 04/37] av7110: audio out fix Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 05/37] add support for KNC-1 cards Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 06/37] remove unnecessary casts in dvb-core Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 07/37] make dvb_class static Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 08/37] dvb_net: handle IPv6 and LLC/SNAP Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 09/37] av7110: fix VIDEO_SET_DISPLAY_FORMAT Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 10/37] av7110: fix NTSC/PAL switching Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 11/37] av7110: fix comment Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 12/37] av7110: fix indentation Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 13/37] nxt6000: support frontend status reads Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 14/37] tda1004x: formatting cleanups Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 15/37] stv0299: fix FE_DISHNETWORK_SEND_LEGACY_CMD Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 16/37] remove unnecessary casts in frontends Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 17/37] dib3000: add NULL pointer check Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 18/37] ves1820: remove unnecessary msleep Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 19/37] mt352: embed struct mt352_config in mt352_state Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 20/37] tda1004x: dont use bitfields Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 21/37] tda1004x: allow N_I2C to be overridden by the card driver Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 22/37] tda10046: support for different firmware versions Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 23/37] dvb-pll.h: prevent multiple inclusion Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 24/37] make needlessly global code static or drop it Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 25/37] frontends: misc. minor cleanups Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 26/37] modified dvb_register_adapter() to avoid kmalloc/kfree Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 27/37] bt8xx: update documentation Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 28/37] DST: reorganize Twinhan DST driver to support CI Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 29/37] DST: add support for Twinhan 200103A Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 30/37] DST: fixed tuning problem Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 31/37] DST: fix for descrambling failure Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 32/37] DST: misc. fixes Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 33/37] bt8xx: updated documentation Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 34/37] DST: fix a bug in the module parameter Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 35/37] DST: fixed CI debug output Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 36/37] bt8xx: whitespace cleanup Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 37/37] budget-av: CI fixes Johannes Stezenbach
2005-05-10 1:04 ` [DVB patch 00/37] DVB updates for 2.6.12-rc4 Andrew Morton
2005-05-10 8:52 ` Johannes Stezenbach
2005-05-10 9:16 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050508184345.178661000@abc \
--to=js@linuxtv.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).