From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: [DVB patch 22/37] tda10046: support for different firmware versions
Date: Sun, 08 May 2005 20:42:51 +0200 [thread overview]
Message-ID: <20050508184348.058001000@abc> (raw)
In-Reply-To: 20050508184229.957247000@abc
[-- Attachment #1: dvb-fe-tda1004x-fw-versions.patch --]
[-- Type: text/plain, Size: 4128 bytes --]
added support for different tda10046 firmware versions.
tested with v20, v21 and v25. (Andreas Oberritter)
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
---
Documentation/dvb/get_dvb_firmware | 4 +--
drivers/media/dvb/frontends/tda1004x.c | 36 +++++++++++++++++++++++++++++++--
2 files changed, 36 insertions(+), 4 deletions(-)
Index: linux-2.6.12-rc4/drivers/media/dvb/frontends/tda1004x.c
===================================================================
--- linux-2.6.12-rc4.orig/drivers/media/dvb/frontends/tda1004x.c 2005-05-08 16:29:28.000000000 +0200
+++ linux-2.6.12-rc4/drivers/media/dvb/frontends/tda1004x.c 2005-05-08 16:30:27.000000000 +0200
@@ -49,6 +49,7 @@ struct tda1004x_state {
/* private demod data */
u8 initialised;
enum tda1004x_demod demod_type;
+ u8 fw_version;
};
@@ -380,6 +381,25 @@ static int tda10045_fwupload(struct dvb_
return tda1004x_check_upload_ok(state, 0x2c);
}
+static int tda10046_get_fw_version(struct tda1004x_state *state,
+ const struct firmware *fw)
+{
+ const unsigned char pattern[] = { 0x67, 0x00, 0x50, 0x62, 0x5e, 0x18, 0x67 };
+ unsigned int i;
+
+ /* area guessed from firmware v20, v21 and v25 */
+ for (i = 0x660; i < 0x700; i++) {
+ if (!memcmp(&fw->data[i], pattern, sizeof(pattern))) {
+ state->fw_version = fw->data[i + sizeof(pattern)];
+ printk(KERN_INFO "tda1004x: using firmware v%02x\n",
+ state->fw_version);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
static int tda10046_fwupload(struct dvb_frontend* fe)
{
struct tda1004x_state* state = fe->demodulator_priv;
@@ -393,7 +413,7 @@ static int tda10046_fwupload(struct dvb_
msleep(100);
/* don't re-upload unless necessary */
- if (tda1004x_check_upload_ok(state, 0x20) == 0)
+ if (tda1004x_check_upload_ok(state, state->fw_version) == 0)
return 0;
/* request the firmware, this will block until someone uploads it */
@@ -404,6 +424,17 @@ static int tda10046_fwupload(struct dvb_
return ret;
}
+ if (fw->size < 24478) { /* size of firmware v20, which is the smallest of v20, v21 and v25 */
+ printk("tda1004x: firmware file seems to be too small (%d bytes)\n", fw->size);
+ return -EINVAL;
+ }
+
+ ret = tda10046_get_fw_version(state, fw);
+ if (ret < 0) {
+ printk("tda1004x: unable to find firmware version\n");
+ return ret;
+ }
+
/* set parameters */
tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10);
tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c);
@@ -427,7 +458,7 @@ static int tda10046_fwupload(struct dvb_
msleep(1);
}
- return tda1004x_check_upload_ok(state, 0x20);
+ return tda1004x_check_upload_ok(state, state->fw_version);
}
static int tda1004x_encode_fec(int fec)
@@ -1185,6 +1216,7 @@ struct dvb_frontend* tda10046_attach(con
memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
state->initialised = 0;
state->demod_type = TDA1004X_DEMOD_TDA10046;
+ state->fw_version = 0x20; /* dummy default value */
/* check if the demod is there */
if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
Index: linux-2.6.12-rc4/Documentation/dvb/get_dvb_firmware
===================================================================
--- linux-2.6.12-rc4.orig/Documentation/dvb/get_dvb_firmware 2005-05-08 15:55:37.000000000 +0200
+++ linux-2.6.12-rc4/Documentation/dvb/get_dvb_firmware 2005-05-08 16:30:27.000000000 +0200
@@ -107,7 +107,7 @@ sub tda10045 {
sub tda10046 {
my $sourcefile = "tt_budget_217g.zip";
my $url = "http://www.technotrend.de/new/217g/$sourcefile";
- my $hash = "a25b579e37109af60f4a36c37893957c";
+ my $hash = "6a7e1e2f2644b162ff0502367553c72d";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -115,7 +115,7 @@ sub tda10046 {
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
- extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24479, "$tmpdir/fwtmp");
+ extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24478, "$tmpdir/fwtmp");
verify("$tmpdir/fwtmp", $hash);
copy("$tmpdir/fwtmp", $outfile);
--
next prev parent reply other threads:[~2005-05-08 20:24 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-08 18:42 [DVB patch 00/37] DVB updates for 2.6.12-rc4 Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 01/37] support for TT/Hauppauge Nexus-S Rev 2.3 Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 02/37] saa7146: no need to initialize static/global variables to 0 Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 03/37] dvb_frontend: fix module param Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 04/37] av7110: audio out fix Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 05/37] add support for KNC-1 cards Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 06/37] remove unnecessary casts in dvb-core Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 07/37] make dvb_class static Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 08/37] dvb_net: handle IPv6 and LLC/SNAP Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 09/37] av7110: fix VIDEO_SET_DISPLAY_FORMAT Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 10/37] av7110: fix NTSC/PAL switching Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 11/37] av7110: fix comment Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 12/37] av7110: fix indentation Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 13/37] nxt6000: support frontend status reads Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 14/37] tda1004x: formatting cleanups Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 15/37] stv0299: fix FE_DISHNETWORK_SEND_LEGACY_CMD Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 16/37] remove unnecessary casts in frontends Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 17/37] dib3000: add NULL pointer check Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 18/37] ves1820: remove unnecessary msleep Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 19/37] mt352: embed struct mt352_config in mt352_state Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 20/37] tda1004x: dont use bitfields Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 21/37] tda1004x: allow N_I2C to be overridden by the card driver Johannes Stezenbach
2005-05-08 18:42 ` Johannes Stezenbach [this message]
2005-05-08 18:42 ` [DVB patch 23/37] dvb-pll.h: prevent multiple inclusion Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 24/37] make needlessly global code static or drop it Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 25/37] frontends: misc. minor cleanups Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 26/37] modified dvb_register_adapter() to avoid kmalloc/kfree Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 27/37] bt8xx: update documentation Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 28/37] DST: reorganize Twinhan DST driver to support CI Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 29/37] DST: add support for Twinhan 200103A Johannes Stezenbach
2005-05-08 18:42 ` [DVB patch 30/37] DST: fixed tuning problem Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 31/37] DST: fix for descrambling failure Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 32/37] DST: misc. fixes Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 33/37] bt8xx: updated documentation Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 34/37] DST: fix a bug in the module parameter Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 35/37] DST: fixed CI debug output Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 36/37] bt8xx: whitespace cleanup Johannes Stezenbach
2005-05-08 18:43 ` [DVB patch 37/37] budget-av: CI fixes Johannes Stezenbach
2005-05-10 1:04 ` [DVB patch 00/37] DVB updates for 2.6.12-rc4 Andrew Morton
2005-05-10 8:52 ` Johannes Stezenbach
2005-05-10 9:16 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050508184348.058001000@abc \
--to=js@linuxtv.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).