From: Ladislav Michl <ladis@linux-mips.org>
To: Greg KH <greg@kroah.com>, Jean Delvare <khali@linux-fr.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
LM Sensors <sensors@Stimpy.netroedge.com>,
James Chapman <jchapman@katalix.com>
Subject: [PATCH] ds1337 driver works also with ds1339 chip
Date: Tue, 10 May 2005 14:08:04 +0200 [thread overview]
Message-ID: <20050510120804.GA2492@orphique> (raw)
In-Reply-To: <Ky47NT3d.1115201231.3150830.khali@localhost>
On Wed, May 04, 2005 at 12:07:11PM +0200, Jean Delvare wrote:
> > Chip is searched by bus number rather than its own proprietary id.
>
> Yes, I think it makes much more sense (especially since the proprietary
> id was not known by anyone outside of the ds1337 driver).
>
> I think I understand that ds1337_do_command() will be called from some
> other kernel driver. Why isn't it exported then? I'd expect:
> EXPORT_SYMBOL(ds1337_do_command);
RTC is hooked early in boot process. It should be available even sooner
than rootfs is mounted. Therefore RTC drivers are usualy compiled in
kernel. Anyway, exporting that function shouldn't hurt :)
> next to the end of the ds1337 driver. Maybe it would also make sense to
> have a ds1337.h header file declaring this function?
I'm not sure if adding yet another driver specific header is a good
idea. Perhaps we should consolidate I2C RTC drivers a bit more and
create common header for them?
> Additionally, I would welcome an additional patch documenting the fact
> that the ds1337 driver will work fine with the Dallas DS1339 real-time
> clock chip.
Document the fact that ds1337 driver works also with DS1339 real-time
clock chip.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
--- linux-omap/drivers/i2c/chips/Kconfig.orig 2005-05-10 13:51:44.417092640 +0200
+++ linux-omap/drivers/i2c/chips/Kconfig 2005-05-10 13:52:33.148684312 +0200
@@ -366,12 +366,12 @@
depends on I2C
config SENSORS_DS1337
- tristate "Dallas Semiconductor DS1337 Real Time Clock"
+ tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get support for Dallas Semiconductor
- DS1337 real-time clock chips.
+ DS1337 and DS1339 real-time clock chips.
This driver can also be built as a module. If so, the module
will be called ds1337.
--- linux-omap/drivers/i2c/chips/ds1337.c.orig 2005-05-10 13:50:25.003165392 +0200
+++ linux-omap/drivers/i2c/chips/ds1337.c 2005-05-10 13:50:57.199270840 +0200
@@ -10,7 +10,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Driver for Dallas Semiconductor DS1337 real time clock chip
+ * Driver for Dallas Semiconductor DS1337 and DS1339 real time clock chip
*/
#include <linux/config.h>
next prev parent reply other threads:[~2005-05-10 12:08 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-31 23:22 [BK PATCH] I2C patches for 2.6.12-rc1 Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-ite: remove interruptible_sleep_on_timeout() usage Greg KH
2005-03-31 23:23 ` [PATCH] i2c/i2c-elektor: " Greg KH
2005-03-31 23:23 ` [PATCH] I2C: New lm92 chip driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Cleanup adm1021 unused defines Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix adm1021 alarms mask Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill unused struct members in w83627hf driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Make master_xfer debug messages more useful Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Skip broken detection step in it87 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: group Intel on I2C Hardware Bus support Greg KH
2005-03-31 23:23 ` [PATCH] i2c: new driver for ds1337 RTC Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Clean up of i2c-elektor.c build Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix breakage in m41t00 i2c rtc driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix some i2c algorithm initialization Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Kill outdated defines in i2c.h Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Avoid repeated resets of i2c-viapro Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Recognize new revision of the ADT7463 chip Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix Vaio EEPROM detection Greg KH
2005-03-31 23:23 ` [PATCH] I2C: busses documentation update 1 of 2 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: busses documentation update 2 " Greg KH
2005-03-31 23:23 ` [PATCH] I2C: lost arbitration detection for PCF8584 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: lsb in emc6d102 and adm1027 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Delete useless instruction in it87 Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix race condition in it87 driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: i2c-s3c2410 functionality and fixes Greg KH
2005-03-31 23:23 ` [PATCH] i2c: add adt7461 chip support to lm90 driver's Kconfig entry Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix broken force parameter handling Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Fix indentation of lm87 driver Greg KH
2005-03-31 23:23 ` [PATCH] I2C: Drop useless w83781d RT feature Greg KH
2005-03-31 23:23 ` [PATCH] i2c: i2c-mv64xxx - set adapter owner and class fields Greg KH
2005-04-07 9:45 ` [PATCH] i2c: new driver for ds1337 RTC Ladislav Michl
2005-04-07 9:59 ` Jean Delvare
2005-04-07 11:16 ` Ladislav Michl
2005-04-07 13:07 ` Jean Delvare
2005-04-07 14:28 ` Ladislav Michl
2005-04-07 21:18 ` Greg KH
2005-04-07 23:17 ` [PATCH] ds1337 1/4 Ladislav Michl
2005-04-07 23:36 ` Greg KH
2005-04-08 13:00 ` Ladislav Michl
2005-04-08 16:31 ` James Chapman
2005-05-02 20:41 ` Greg KH
2005-04-08 8:49 ` Jean Delvare
2005-04-07 23:18 ` [PATCH] ds1337 2/4 Ladislav Michl
2005-04-08 8:51 ` Jean Delvare
2005-04-08 13:02 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-04-07 23:18 ` [PATCH] ds1337 3/4 Ladislav Michl
2005-04-08 10:08 ` Jean Delvare
2005-04-08 13:06 ` Ladislav Michl
2005-05-02 20:41 ` Greg KH
2005-05-04 6:13 ` [PATCH] ds1337 1/3 Ladislav Michl
2005-05-04 8:41 ` Jean Delvare
2005-05-04 6:13 ` [PATCH] ds1337 2/3 Ladislav Michl
2005-05-04 9:44 ` Jean Delvare
2005-05-04 6:14 ` [PATCH] ds1337 3/3 Ladislav Michl
2005-05-04 10:07 ` Jean Delvare
2005-05-10 12:08 ` Ladislav Michl [this message]
2005-05-10 12:40 ` [PATCH] ds1337 driver works also with ds1339 chip Jean Delvare
2005-05-10 12:48 ` Russell King
[not found] ` <1DTwF8-18P-00@press.kroah.org>
[not found] ` <20050508204021.627f9cd1.khali@linux-fr.org>
[not found] ` <427E6E21.60001@katalix.com>
[not found] ` <20050508222351.08bfe2e1.khali@linux-fr.org>
2005-05-10 12:18 ` [PATCH] ds1337: export ds1337_do_command Ladislav Michl
2005-05-10 12:51 ` Jean Delvare
2005-05-10 17:55 ` Greg KH
2005-05-10 18:36 ` Ladislav Michl
2005-05-10 20:30 ` Greg KH
2005-05-11 8:32 ` Ladislav Michl
2005-04-07 23:19 ` [PATCH] ds1337 4/4 Ladislav Michl
2005-04-08 11:08 ` Jean Delvare
2005-04-08 12:35 ` Ladislav Michl
2005-04-08 16:21 ` Jean Delvare
2005-04-08 17:44 ` James Chapman
2005-04-10 19:51 ` Ladislav Michl
2005-04-10 21:10 ` Jean Delvare
2005-04-12 18:10 ` James Chapman
2005-04-13 11:04 ` Ladislav Michl
2005-04-13 19:02 ` James Chapman
2005-04-13 19:48 ` Ladislav Michl
2005-04-07 21:29 ` [PATCH] i2c: new driver for ds1337 RTC Jean Delvare
2005-04-07 23:16 ` Ladislav Michl
-- strict thread matches above, loose matches on Subject: below --
2005-06-22 5:17 [PATCH] I2C: ds1337: search by bus number Greg KH
2005-06-22 5:17 ` [PATCH] ds1337 driver works also with ds1339 chip Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050510120804.GA2492@orphique \
--to=ladis@linux-mips.org \
--cc=greg@kroah.com \
--cc=jchapman@katalix.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sensors@Stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox