From: Alexey Fisher <fishor@gmx.net>
To: linux-kernel@vger.kernel.org
Cc: trivial@rustcorp.com.au
Subject: clean up and warnings patch for 2.6.12-rc4-mm1 i2c-chip
Date: Mon, 16 May 2005 00:14:35 +0200 [thread overview]
Message-ID: <200505160014.36016.fishor@gmx.net> (raw)
Hi here is some clean ups for Kconfig in i2c/chips subdirectory and error handling fix up for chip max1619.
Best regards.
Alexey Fisher
diff -uprN linux/drivers/i2c/chips/Kconfig linux-2.6-dev/drivers/i2c/chips/Kconfig
--- linux/drivers/i2c/chips/Kconfig 2005-05-15 22:49:31.000000000 +0200
+++ linux-2.6-dev/drivers/i2c/chips/Kconfig 2005-05-15 22:58:28.000000000 +0200
@@ -29,6 +29,7 @@ config SENSORS_ADM1025
help
If you say yes here you get support for Analog Devices ADM1025
and Philips NE1619 sensor chips.
+
This driver can also be built as a module. If so, the module
will be called adm1025.
@@ -38,6 +39,7 @@ config SENSORS_ADM1026
select I2C_SENSOR
help
If you say yes here you get support for Analog Devices ADM1026
+
This driver can also be built as a module. If so, the module
will be called adm1026.
@@ -48,6 +50,7 @@ config SENSORS_ADM1031
help
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
+
This driver can also be built as a module. If so, the module
will be called adm1031.
@@ -198,8 +201,7 @@ config SENSORS_LM78
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM78,
- LM78-J and LM79. This can also be built as a module which can be
- inserted and removed while the kernel is running.
+ LM78-J and LM79.
This driver can also be built as a module. If so, the module
will be called lm78.
@@ -232,7 +234,7 @@ config SENSORS_LM85
select I2C_SENSOR
help
If you say yes here you get support for National Semiconductor LM85
- sensor chips and clones: ADT7463 and ADM1027.
+ sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
This driver can also be built as a module. If so, the module
will be called lm85.
diff -uprN linux/drivers/i2c/chips/max1619.c linux-2.6-dev/drivers/i2c/chips/max1619.c
--- linux/drivers/i2c/chips/max1619.c 2005-05-15 22:49:31.000000000 +0200
+++ linux-2.6-dev/drivers/i2c/chips/max1619.c 2005-05-15 21:05:56.000000000 +0200
@@ -195,6 +195,7 @@ static int max1619_detect(struct i2c_ada
u8 reg_config=0, reg_convrate=0, reg_status=0;
u8 man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ err = -ENODEV;
goto exit;
if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
@@ -234,6 +235,7 @@ static int max1619_detect(struct i2c_ada
dev_dbg(&adapter->dev,
"MAX1619 detection failed at 0x%02x.\n",
address);
+ return -ENODEV;
goto exit_free;
}
}
@@ -254,6 +256,7 @@ static int max1619_detect(struct i2c_ada
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, "
"chip_id=0x%02X).\n", man_id, chip_id);
+ return -ENODEV;
goto exit_free;
}
diff -uprN linux/drivers/pci/pci.ids linux-2.6-dev/drivers/pci/pci.ids
--- linux/drivers/pci/pci.ids 2005-05-07 07:20:31.000000000 +0200
+++ linux-2.6-dev/drivers/pci/pci.ids 2005-05-15 23:16:21.000000000 +0200
@@ -5322,6 +5322,7 @@
0459 LT WinModem
045a LT WinModem
045c LT WinModem
+ 045d LT WinModem
0461 V90 WildWire Modem
0462 V90 WildWire Modem
0480 Venus Modem (V90, 56KFlex)
next reply other threads:[~2005-05-15 22:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-15 22:14 Alexey Fisher [this message]
2005-05-16 17:19 ` clean up and warnings patch for 2.6.12-rc4-mm1 i2c-chip Jean Delvare
2005-05-17 6:41 ` Alexey Fisher
2005-05-17 7:41 ` Jean Delvare
[not found] <44zCV-1kI-17@gated-at.bofh.it>
2005-05-16 9:39 ` Daniel Paschka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200505160014.36016.fishor@gmx.net \
--to=fishor@gmx.net \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@rustcorp.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox