* kexec? @ 2005-05-08 20:20 Ralf Hildebrandt 2005-05-10 1:34 ` kexec? Randy.Dunlap 0 siblings, 1 reply; 15+ messages in thread From: Ralf Hildebrandt @ 2005-05-08 20:20 UTC (permalink / raw) To: linux-kernel I know kexec used to be a patch, but has it gone into the mainstream kernels yet? -- Ralf Hildebrandt (i.A. des IT-Zentrums) Ralf.Hildebrandt@charite.de Charite - Universitätsmedizin Berlin Tel. +49 (0)30-450 570-155 Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-962 IT-Zentrum Standort CBF send no mail to spamtrap@charite.de ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-08 20:20 kexec? Ralf Hildebrandt @ 2005-05-10 1:34 ` Randy.Dunlap 2005-05-10 7:00 ` kexec? Coywolf Qi Hunt 0 siblings, 1 reply; 15+ messages in thread From: Randy.Dunlap @ 2005-05-10 1:34 UTC (permalink / raw) To: Ralf Hildebrandt; +Cc: linux-kernel On Sun, 8 May 2005 22:20:50 +0200 Ralf Hildebrandt wrote: | I know kexec used to be a patch, but has it gone into the mainstream | kernels yet? Nope, it's only in the -mm patchset. Testing/reporting that could help.... --- ~Randy ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-10 1:34 ` kexec? Randy.Dunlap @ 2005-05-10 7:00 ` Coywolf Qi Hunt 2005-05-10 10:15 ` kexec? Borislav Petkov 0 siblings, 1 reply; 15+ messages in thread From: Coywolf Qi Hunt @ 2005-05-10 7:00 UTC (permalink / raw) To: Randy.Dunlap; +Cc: Ralf Hildebrandt, linux-kernel On 5/10/05, Randy.Dunlap <rddunlap@osdl.org> wrote: > On Sun, 8 May 2005 22:20:50 +0200 Ralf Hildebrandt wrote: > > | I know kexec used to be a patch, but has it gone into the mainstream > | kernels yet? > > Nope, it's only in the -mm patchset. > Testing/reporting that could help.... coywolf@prodigy:~/kexec-tools-1.95/objdir/build/bin$ ./kexec_test Segmentation fault prodigy:/home/coywolf/kexec-tools-1.95/objdir/build/sbin# ./kexec -l /var/local/build/vmlinux kexec_load failed: Cannot assign requested address entry = (nil) nr_segments = 2 segment[0].buf = 0x80b4558 segment[0].bufsz = 15c segment[0].mem = (nil) segment[0].memsz = 15c segment[1].buf = 0xb7d53008 segment[1].bufsz = 2a0086 segment[1].mem = 0x100000 segment[1].memsz = 2c8a78 prodigy:/home/coywolf/kexec-tools-1.95/objdir/build/sbin# ./kexec -l /var/local/build/arch/i386/boot/bzImage kexec_load failed: Cannot assign requested address entry = 0x91734 nr_segments = 2 segment[0].buf = 0x80b4480 segment[0].bufsz = 1850 segment[0].mem = 0x90000 segment[0].memsz = 1850 segment[1].buf = 0xb7eaa008 segment[1].bufsz = 14032d segment[1].mem = 0x100000 segment[1].memsz = 14032d -- Coywolf Qi Hunt http://sosdg.org/~coywolf/ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-10 7:00 ` kexec? Coywolf Qi Hunt @ 2005-05-10 10:15 ` Borislav Petkov 2005-05-10 13:11 ` kexec? Coywolf Qi Hunt 0 siblings, 1 reply; 15+ messages in thread From: Borislav Petkov @ 2005-05-10 10:15 UTC (permalink / raw) To: coywolf; +Cc: Randy.Dunlap, Ralf Hildebrandt, linux-kernel On Tuesday 10 May 2005 09:00, Coywolf Qi Hunt wrote: > On 5/10/05, Randy.Dunlap <rddunlap@osdl.org> wrote: > > On Sun, 8 May 2005 22:20:50 +0200 Ralf Hildebrandt wrote: > > | I know kexec used to be a patch, but has it gone into the mainstream > > | kernels yet? > > > > Nope, it's only in the -mm patchset. > > Testing/reporting that could help.... > > coywolf@prodigy:~/kexec-tools-1.95/objdir/build/bin$ ./kexec_test > Segmentation fault > > prodigy:/home/coywolf/kexec-tools-1.95/objdir/build/sbin# ./kexec -l > /var/local/build/vmlinux > kexec_load failed: Cannot assign requested address > entry = (nil) > nr_segments = 2 > segment[0].buf = 0x80b4558 > segment[0].bufsz = 15c > segment[0].mem = (nil) > segment[0].memsz = 15c > segment[1].buf = 0xb7d53008 > segment[1].bufsz = 2a0086 > segment[1].mem = 0x100000 > segment[1].memsz = 2c8a78 > > prodigy:/home/coywolf/kexec-tools-1.95/objdir/build/sbin# ./kexec -l > /var/local/build/arch/i386/boot/bzImage > kexec_load failed: Cannot assign requested address > entry = 0x91734 > nr_segments = 2 > segment[0].buf = 0x80b4480 > segment[0].bufsz = 1850 > segment[0].mem = 0x90000 > segment[0].memsz = 1850 > segment[1].buf = 0xb7eaa008 > segment[1].bufsz = 14032d > segment[1].mem = 0x100000 > segment[1].memsz = 14032d Hi, I've been doing some kexec tests (as described in Documentation/kdump.txt) too but can't get to load the image and get similar error messages. Let me know if you need more info about the hardware. The first_kernel was booted with "crashkernel=64M@16M" and the 16M value was configured into the second during kconfig in "Physical address where the kernel is loaded" as 0x1000000. [root@zmei]: kexec -p vmlinux --args-linux --append="root=/dev/hda1 maxcpus=1 init 1" kexec_load failed: Cannot assign requested address entry = 0x1498 flags = 1 nr_segments = 4 segment[0].buf = 0x8067ba0 segment[0].bufsz = 80c0 segment[0].mem = 0x1000 segment[0].memsz = a000 segment[1].buf = 0x806fd80 segment[1].bufsz = 1000 segment[1].mem = 0xb000 segment[1].memsz = 1000 segment[2].buf = 0xb6dbc008 segment[2].bufsz = 3d619c segment[2].mem = 0x1000000 segment[2].memsz = 3d7000 segment[3].buf = 0xb7193008 segment[3].bufsz = 2b086 segment[3].mem = 0x13d8000 segment[3].memsz = 55000 ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-10 10:15 ` kexec? Borislav Petkov @ 2005-05-10 13:11 ` Coywolf Qi Hunt 2005-05-11 6:04 ` kexec? Maneesh Soni 0 siblings, 1 reply; 15+ messages in thread From: Coywolf Qi Hunt @ 2005-05-10 13:11 UTC (permalink / raw) To: Borislav Petkov; +Cc: Randy.Dunlap, Ralf Hildebrandt, linux-kernel On 5/10/05, Borislav Petkov <petkov@uni-muenster.de> wrote: > I've been doing some kexec tests (as described in Documentation/kdump.txt) too > but can't get to load the image and get similar error messages. Let me know > if you need more info about the hardware. The first_kernel was booted with > "crashkernel=64M@16M" and the 16M value was configured into the second during > kconfig in "Physical address where the kernel is loaded" as 0x1000000. > > [root@zmei]: kexec -p vmlinux --args-linux --append="root=/dev/hda1 maxcpus=1 > init 1" kexec-tools-1.101 loads for me, but if cmdline is used, it hangs up after "Starting new kernel" -- Coywolf Qi Hunt http://sosdg.org/~coywolf/ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-10 13:11 ` kexec? Coywolf Qi Hunt @ 2005-05-11 6:04 ` Maneesh Soni 2005-05-11 11:51 ` kexec? Borislav Petkov 0 siblings, 1 reply; 15+ messages in thread From: Maneesh Soni @ 2005-05-11 6:04 UTC (permalink / raw) To: coywolf; +Cc: Borislav Petkov, Randy.Dunlap, Ralf Hildebrandt, linux-kernel On Tue, May 10, 2005 at 09:11:31PM +0800, Coywolf Qi Hunt wrote: > On 5/10/05, Borislav Petkov <petkov@uni-muenster.de> wrote: > > I've been doing some kexec tests (as described in Documentation/kdump.txt) too > > but can't get to load the image and get similar error messages. Let me know > > if you need more info about the hardware. The first_kernel was booted with > > "crashkernel=64M@16M" and the 16M value was configured into the second during > > kconfig in "Physical address where the kernel is loaded" as 0x1000000. > > > > [root@zmei]: kexec -p vmlinux --args-linux --append="root=/dev/hda1 maxcpus=1 > > init 1" > > kexec-tools-1.101 loads for me, but if cmdline is used, it hangs up > after "Starting new kernel" Thanks for trying this out. As Vivek mentioned can you please try with bulding second or dump capture kernel with CONFIG_SMP=N and _without_ maxcpus= option. Basically the second kernel's job is just to save the dump and it doesnot need to be a SMP kernel. There are some issues with booting SMP kernel as dump capture kernel. Also, it would be great help if you can also send us some hardware details about the system you are trying, like lspci, /proc/cpuinfo and which kernel you tried. I am maintaining a webpage to consolidate the test reports of kexec/kdump at http://lse.sourceforge.net/kdump/kdump-test.html Thanks Maneesh -- Maneesh Soni Linux Technology Center, IBM India Software Labs, Bangalore, India email: maneesh@in.ibm.com Phone: 91-80-25044990 ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-11 6:04 ` kexec? Maneesh Soni @ 2005-05-11 11:51 ` Borislav Petkov 2005-05-11 14:39 ` kexec? Coywolf Qi Hunt 2005-05-12 6:41 ` kexec? Maneesh Soni 0 siblings, 2 replies; 15+ messages in thread From: Borislav Petkov @ 2005-05-11 11:51 UTC (permalink / raw) To: maneesh, Vivek Goyal Cc: coywolf, Randy.Dunlap, Ralf Hildebrandt, linux-kernel On Wednesday 11 May 2005 08:04, Maneesh Soni wrote: <snip> > > > [root@zmei]: kexec -p vmlinux --args-linux --append="root=/dev/hda1 > > > maxcpus=1 init 1" > > > > kexec-tools-1.101 loads for me, but if cmdline is used, it hangs up > > after "Starting new kernel" > > Thanks for trying this out. As Vivek mentioned can you please try with > bulding second or dump capture kernel with CONFIG_SMP=N and _without_ > maxcpus= option. Basically the second kernel's job is just to save the dump > and it doesnot need to be a SMP kernel. There are some issues with booting > SMP kernel as dump capture kernel. Hm, without 'maxcpus' seems to work. However, when booting into the new kernel, the rootfs had to be fsck'ed due to "/ was not cleanly unmounted, check forced." and then was forced to reboot linux due to inconsistency in the fs. I simply did kexec -l <vmlinux> --args-linux --append="root=/dev/hda1 init 1" and then kexec -e to execute the loaded image. It seems that the filesystems are not unmounted properly before loading the second kernel, (or I am missing something..., which is more likely :)) > Also, it would be great help if you can also send us some hardware details > about the system you are trying, like lspci, [root@zmei] lspci -vv 0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03) Subsystem: Unknown device 1849:2560 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [e4] #09 [6105] Capabilities: [a0] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Bus: primary=00, secondary=01, subordinate=02, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: dfd00000-dfdfffff Prefetchable memory behind bridge: bfb00000-dfafffff BridgeCtl: Parity+ SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: Unknown device 1849:24c0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e400 [size=32] 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: Unknown device 1849:24c0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e800 [size=32] 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: Unknown device 1849:24c0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ec00 [size=32] 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: Unknown device 1849:24c0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at dffffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [2080] 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 82) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfe00000-dfefffff Prefetchable memory behind bridge: dfb00000-dfbfffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Unknown device 1849:24c0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at fc00 [size=16] Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA]) Subsystem: C.P. Technology Co. Ltd CN-AG92E Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 16 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at c800 [size=256] Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at dfdc0000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:03:04.0 Multimedia audio controller: Yamaha Corporation YMF-724 (rev 05) Subsystem: Yamaha Corporation YMF724-Based PCI Audio Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 32 (1250ns min, 6250ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfef8000 (32-bit, non-prefetchable) [size=32K] Capabilities: [50] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:03:06.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) Subsystem: Unknown device 182d:3525 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin A routed to IRQ 3 Region 0: Memory at dfee0000 (32-bit, non-prefetchable) [size=64K] Region 1: I/O ports at dc00 [size=8] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 0000:03:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at dfbfe000 (32-bit, prefetchable) [size=4K] 0000:03:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02) Subsystem: Hauppauge computer works Inc. WinTV Series Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at dfbff000 (32-bit, prefetchable) [size=4K] 0000:03:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Unknown device 1849:8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 1: Memory at dfef7f00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [root@zmei]: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2606.716 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 5216.96 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.60GHz stepping : 9 cpu MHz : 2606.716 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 5211.17 The kernel i used is: 2.6.12-rc3-mm3 Regards, Boris. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-11 11:51 ` kexec? Borislav Petkov @ 2005-05-11 14:39 ` Coywolf Qi Hunt 2005-05-12 6:41 ` kexec? Maneesh Soni 1 sibling, 0 replies; 15+ messages in thread From: Coywolf Qi Hunt @ 2005-05-11 14:39 UTC (permalink / raw) To: Borislav Petkov Cc: maneesh, Vivek Goyal, Randy.Dunlap, Ralf Hildebrandt, linux-kernel On 5/11/05, Borislav Petkov <petkov@uni-muenster.de> wrote: > On Wednesday 11 May 2005 08:04, Maneesh Soni wrote: > <snip> > > > > [root@zmei]: kexec -p vmlinux --args-linux --append="root=/dev/hda1 > > > > maxcpus=1 init 1" > > > > > > kexec-tools-1.101 loads for me, but if cmdline is used, it hangs up > > > after "Starting new kernel" > > > > Thanks for trying this out. As Vivek mentioned can you please try with > > bulding second or dump capture kernel with CONFIG_SMP=N and _without_ > > maxcpus= option. Basically the second kernel's job is just to save the dump > > and it doesnot need to be a SMP kernel. There are some issues with booting > > SMP kernel as dump capture kernel. > > Hm, without 'maxcpus' seems to work. However, when booting into the new > kernel, the rootfs had to be fsck'ed due to "/ was not cleanly unmounted, > check forced." and then was forced to reboot linux due to inconsistency in > the fs. I simply did kexec -l <vmlinux> --args-linux --append="root=/dev/hda1 > init 1" and then kexec -e to execute the loaded image. It seems that the > filesystems are not unmounted properly before loading the second kernel, (or > I am missing something..., which is more likely :)) kexec is like a bare reboot. Add kexec -l and -e just above the reboot line in your /etc/init.d/reboot script, or umount manually( sysrq+s sysrq+u ). -- Coywolf Qi Hunt http://sosdg.org/~coywolf/ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-11 11:51 ` kexec? Borislav Petkov 2005-05-11 14:39 ` kexec? Coywolf Qi Hunt @ 2005-05-12 6:41 ` Maneesh Soni 2005-05-16 22:11 ` kexec? Borislav Petkov 1 sibling, 1 reply; 15+ messages in thread From: Maneesh Soni @ 2005-05-12 6:41 UTC (permalink / raw) To: Borislav Petkov Cc: Vivek Goyal, coywolf, Randy.Dunlap, Ralf Hildebrandt, linux-kernel On Wed, May 11, 2005 at 01:51:41PM +0200, Borislav Petkov wrote: > On Wednesday 11 May 2005 08:04, Maneesh Soni wrote: > <snip> > > > > [root@zmei]: kexec -p vmlinux --args-linux --append="root=/dev/hda1 > > > > maxcpus=1 init 1" > > > > > > kexec-tools-1.101 loads for me, but if cmdline is used, it hangs up > > > after "Starting new kernel" > > > > Thanks for trying this out. As Vivek mentioned can you please try with > > bulding second or dump capture kernel with CONFIG_SMP=N and _without_ > > maxcpus= option. Basically the second kernel's job is just to save the dump > > and it doesnot need to be a SMP kernel. There are some issues with booting > > SMP kernel as dump capture kernel. > > Hm, without 'maxcpus' seems to work. However, when booting into the new > kernel, the rootfs had to be fsck'ed due to "/ was not cleanly unmounted, > check forced." and then was forced to reboot linux due to inconsistency in > the fs. I simply did kexec -l <vmlinux> --args-linux --append="root=/dev/hda1 > init 1" and then kexec -e to execute the loaded image. It seems that the > filesystems are not unmounted properly before loading the second kernel, (or > I am missing something..., which is more likely :)) > > > Also, it would be great help if you can also send us some hardware details > > about the system you are trying, like lspci, > [root@zmei] lspci -vv Thanks Boris, I have updated the kdump test page with details you provided. http://lse.sourceforge.net/kdump/kdump-test.html It will be nice if you could try kdump also on the similar lines. Thanks Maneesh -- Maneesh Soni Linux Technology Center, IBM India Software Labs, Bangalore, India email: maneesh@in.ibm.com Phone: 91-80-25044990 ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-12 6:41 ` kexec? Maneesh Soni @ 2005-05-16 22:11 ` Borislav Petkov 2005-05-17 10:02 ` kexec? Vivek Goyal 0 siblings, 1 reply; 15+ messages in thread From: Borislav Petkov @ 2005-05-16 22:11 UTC (permalink / raw) To: maneesh; +Cc: Vivek Goyal, coywolf, Randy.Dunlap, Ralf Hildebrandt, linux-kernel <snip> > > It will be nice if you could try kdump also on the similar lines. HI, After patching kexec-tools with the kdump patch here's what I did according to the test plan: 0. load kernel with crashkernel=64M@16M 1. kexec -p vmlinux --args-linux --append="root=/dev/hda1 init 1" (loads fine) 2. sysrq+c the system issues here : SysRq: Trigger a crashdump and hangs so that even SysRq is dead. Regards, Boris. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-16 22:11 ` kexec? Borislav Petkov @ 2005-05-17 10:02 ` Vivek Goyal 2005-05-18 7:58 ` kexec? Borislav Petkov 0 siblings, 1 reply; 15+ messages in thread From: Vivek Goyal @ 2005-05-17 10:02 UTC (permalink / raw) To: Borislav Petkov Cc: maneesh, Vivek Goyal, coywolf, Randy.Dunlap, Ralf Hildebrandt, linux-kernel, Fastboot mailing list On Tue, May 17, 2005 at 12:11:43AM +0200, Borislav Petkov wrote: Hi, > <snip> > > > > It will be nice if you could try kdump also on the similar lines. > > HI, > > After patching kexec-tools with the kdump patch here's what I did according to > the test plan: > > 0. load kernel with crashkernel=64M@16M > 1. kexec -p vmlinux --args-linux --append="root=/dev/hda1 init 1" (loads fine) > 2. sysrq+c > the system issues here : SysRq: Trigger a crashdump and hangs so that even > SysRq is dead. > Thanks for testing this out. So kexec on panic seems to be hanging. Are you booted in first kernel with commandline option nmi_watchdog? We have a known issue with nmi_watchdog and just now I have posted a patch. Could you please try loading the new kernel with --console-vga or --console-serial option (depending on what console you are on) and post the output. Is it possible to post the .config file for both the kernels as well serial console output (if one is setup). This should help. Thanks Vivek ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-17 10:02 ` kexec? Vivek Goyal @ 2005-05-18 7:58 ` Borislav Petkov 2005-05-20 10:52 ` kexec? Vivek Goyal 0 siblings, 1 reply; 15+ messages in thread From: Borislav Petkov @ 2005-05-18 7:58 UTC (permalink / raw) To: vgoyal Cc: maneesh, coywolf, Ralf Hildebrandt, linux-kernel, Fastboot mailing list [-- Attachment #1: Type: text/plain, Size: 1460 bytes --] On Tuesday 17 May 2005 12:02, Vivek Goyal wrote: > On Tue, May 17, 2005 at 12:11:43AM +0200, Borislav Petkov wrote: > Hi, > > > <snip> > > > > > It will be nice if you could try kdump also on the similar lines. > > > > HI, > > > > After patching kexec-tools with the kdump patch here's what I did > > according to the test plan: > > > > 0. load kernel with crashkernel=64M@16M > > 1. kexec -p vmlinux --args-linux --append="root=/dev/hda1 init 1" (loads > > fine) 2. sysrq+c > > the system issues here : SysRq: Trigger a crashdump and hangs so that > > even SysRq is dead. > > Thanks for testing this out. So kexec on panic seems to be hanging. Are you > booted in first kernel with commandline option nmi_watchdog? We have a > known issue with nmi_watchdog and just now I have posted a patch. No, my kernel commandline options are: root=/dev/hda1 vga=0 crashkernel=64M@16M > Could you please try loading the new kernel with --console-vga or > --console-serial option (depending on what console you are on) and post > the output. Same thing happens - total lockup. > Is it possible to post the .config file for both the kernels as well serial > console output (if one is setup). This should help. .configs and console output attached. The serial console output sheds no more light on the matter, unfortunately. It seems that the lockup happens pretty early and the kernel suffers an early death without even a last breath of goodbye :) Regards, Boris. [-- Attachment #2: 1st_config --] [-- Type: text/plain, Size: 35512 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.12-rc3-mm3 # Mon May 9 23:21:57 2005 # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_HPET_TIMER=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_SCHED_SMT=y CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_FLATMEM=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_IRQBALANCE=y CONFIG_HAVE_DEC_LOCK=y CONFIG_REGPARM=y CONFIG_SECCOMP=y # # Performance-monitoring counters support # # CONFIG_PERFCTR is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_KEXEC=y # # Power management options (ACPI, APM) # CONFIG_PM=y CONFIG_PM_DEBUG=y # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_VIDEO=m CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set # CONFIG_ACPI_CONTAINER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # CONFIG_HOTPLUG_CPU is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_SERIAL=y # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_INITRAMFS_SOURCE="" # CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=m # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # # CONFIG_BLK_DEV_SD is not set # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=m # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=m CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_CT_ACCT=y # CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_CT_PROTO_SCTP is not set CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m CONFIG_IP_NF_MATCH_AH_ESP=m CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_REALM=m CONFIG_IP_NF_MATCH_SCTP=m CONFIG_IP_NF_MATCH_COMMENT=m CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_SAME=m # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_NAT_IRC=m CONFIG_IP_NF_NAT_FTP=m CONFIG_IP_NF_NAT_TFTP=m CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_DSCP=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_CLASSIFY=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_KGDBOE=y CONFIG_NETPOLL=y CONFIG_NETPOLL_RX=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # # Obsolete Wireless cards support (pre-802.11) # # CONFIG_STRIP is not set # CONFIG_ARLAN is not set # CONFIG_WAVELAN is not set # # Wireless 802.11b ISA/PCI cards support # # CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # # CONFIG_PRISM54 is not set # CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_SERIAL=m # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set CONFIG_RTC=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # # I2C support # CONFIG_I2C=m # CONFIG_I2C_CHARDEV is not set # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # # # Video Adapters # CONFIG_VIDEO_BT848=m # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_OVCAMCHIP is not set # # Radio Adapters # # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set # CONFIG_RADIO_RTRACK2 is not set # CONFIG_RADIO_AZTECH is not set # CONFIG_RADIO_GEMTEK is not set # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # CONFIG_RADIO_SF16FMI is not set # CONFIG_RADIO_SF16FMR2 is not set # CONFIG_RADIO_TERRATEC is not set # CONFIG_RADIO_TRUST is not set # CONFIG_RADIO_TYPHOON is not set # CONFIG_RADIO_ZOLTRIX is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_BUF=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR=m CONFIG_VIDEO_TVEEPROM=m # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_HWDEP=y CONFIG_SND_RAWMIDI=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=y CONFIG_SND_OPL3_LIB=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # # PCI devices # CONFIG_SND_AC97_CODEC=y # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set CONFIG_SND_YMFPCI=y # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # CONFIG_USB_AUDIO=m # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Input Devices # CONFIG_USB_HID=m # CONFIG_USB_HIDINPUT is not set # CONFIG_USB_HIDDEV is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_PWC is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # # USB ATM/DSL drivers # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # CONFIG_INFINIBAND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # # XFS support # # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # Caches # # CONFIG_FSCACHE is not set CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=m CONFIG_NTFS_DEBUG=y CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_RELAYFS_FS=m # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-15" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=15 CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHEDSTATS=y CONFIG_DEBUG_SLAB=y CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_PAGE_OWNER is not set CONFIG_DEBUG_FS=y CONFIG_FRAME_POINTER=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_4KSTACKS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_KGDB=y # CONFIG_KGDB_9600BAUD is not set # CONFIG_KGDB_19200BAUD is not set # CONFIG_KGDB_38400BAUD is not set # CONFIG_KGDB_57600BAUD is not set CONFIG_KGDB_115200BAUD=y CONFIG_KGDB_PORT=0x3f8 CONFIG_KGDB_IRQ=4 # CONFIG_KGDB_MORE is not set CONFIG_NO_KGDB_CPUS=2 CONFIG_KGDB_TS=y # CONFIG_KGDB_TS_64 is not set CONFIG_KGDB_TS_128=y # CONFIG_KGDB_TS_256 is not set # CONFIG_KGDB_TS_512 is not set # CONFIG_KGDB_TS_1024 is not set CONFIG_STACK_OVERFLOW_TEST=y CONFIG_TRAP_BAD_SYSCALL_EXITS=y CONFIG_KGDB_CONSOLE=y CONFIG_KGDB_SYSRQ=y # # Security options # # CONFIG_KEYS is not set CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_SECLVL=m # CONFIG_SECURITY_SELINUX is not set # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES_586=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # # CONFIG_CRYPTO_DEV_PADLOCK is not set # # Library routines # CONFIG_CRC_CCITT=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_X86_SMP=y CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_PC=y [-- Attachment #3: 2nd_config --] [-- Type: text/plain, Size: 30181 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.12-rc3-mm3-kdump # Tue May 10 00:14:40 2005 # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HPET_TIMER is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y CONFIG_X86_MCE=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_FLATMEM=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set CONFIG_SECCOMP=y # # Performance-monitoring counters support # # CONFIG_PERFCTR is not set CONFIG_PHYSICAL_START=0x1000000 # CONFIG_KEXEC is not set CONFIG_CRASH_DUMP=y # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=m CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set CONFIG_ACPI_IBM=m # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set # CONFIG_ACPI_CONTAINER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_INITRAMFS_SOURCE="" CONFIG_LBD=y # CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set CONFIG_SCSI_DPT_I2O=m # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set CONFIG_SCSI_ATA_PIIX=y # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set CONFIG_SCSI_SATA_SX4=m # CONFIG_SCSI_SATA_SIL is not set CONFIG_SCSI_SATA_SIS=m # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set CONFIG_SCSI_IPR=m # CONFIG_SCSI_IPR_TRACE is not set # CONFIG_SCSI_IPR_DUMP is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set # # Device Drivers # # # Texas Instruments PCILynx requires I2C # CONFIG_IEEE1394_OHCI1394=y # # Protocol Drivers # # CONFIG_IEEE1394_VIDEO1394 is not set # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set CONFIG_IEEE1394_RAWIO=y # CONFIG_IEEE1394_CMP is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y # CONFIG_IP_NF_CT_ACCT is not set # CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_CT_PROTO_SCTP is not set # CONFIG_IP_NF_FTP is not set # CONFIG_IP_NF_IRC is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_IPRANGE=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_RECENT=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH_ESP=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_HELPER=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_OWNER=y # CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_REALM is not set # CONFIG_IP_NF_MATCH_SCTP is not set # CONFIG_IP_NF_MATCH_COMMENT is not set # CONFIG_IP_NF_MATCH_HASHLIMIT is not set CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_SAME=y # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_CLASSIFY=y CONFIG_IP_NF_RAW=m CONFIG_IP_NF_TARGET_NOTRACK=m CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_KGDBOE is not set # CONFIG_NETPOLL is not set # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set CONFIG_8139TOO=y CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_2BUFF_MODE is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # # I2C support # # CONFIG_I2C is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # # PCI devices # CONFIG_SND_AC97_CODEC=y # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=y # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set CONFIG_USB_EGALAX=m # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set CONFIG_USB_CYTHERM=m # CONFIG_USB_PHIDGETKIT is not set CONFIG_USB_PHIDGETSERVO=m # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_TEST is not set # # USB ATM/DSL drivers # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # CONFIG_INFINIBAND is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISER4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # # XFS support # # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # Caches # # CONFIG_FSCACHE is not set # CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # CONFIG_PROFILING=y CONFIG_OPROFILE=y # # Kernel hacking # # CONFIG_PRINTK_TIME is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_EARLY_PRINTK=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Hardware crypto devices # # # Library routines # # CONFIG_CRC_CCITT is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y [-- Attachment #4: minicom.cap --] [-- Type: text/plain, Size: 16307 bytes --] [4294667.296000] Linux version 2.6.12-rc3-mm3 (boris@zmei) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #14 SMP Mon May 9 23:34:16 CEST 2005 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000ce000 - 00000000000d60ac (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) [4294667.296000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [4294667.296000] 511MB LOWMEM available. [4294667.296000] found SMP MP-table at 000fbad0 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 15:2 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [4294667.296000] Processor #1 15:2 APIC version 20 [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Initializing CPU#0 [4294667.296000] Kernel command line: root=/dev/hda1 vga=0 crashkernel=64M@16M console=ttyS0,115200 console=tty0 [4294667.296000] CPU 0 irqstacks, hard=c04ac000 soft=c04aa000 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [ 0.000000] Detected 2606.827 MHz processor. [ 58.661242] Using tsc for high-res timesource [ 58.662171] Console: colour VGA+ 80x25 [ 58.892400] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 58.900969] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 58.917677] Memory: 449252k/524224k available (2263k kernel code, 74484k reserved, 1273k data, 188k init, 0k highmem) [ 58.929334] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 58.998193] Calibrating delay using timer specific routine.. 5216.96 BogoMIPS (lpj=2608482) [ 59.007466] Security Framework v1.0.0 initialized [ 59.012639] Capability LSM initialized [ 59.016790] Mount-cache hash table entries: 512 [ 59.021994] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 59.027667] CPU: L2 cache: 512K [ 59.031125] CPU: Physical Processor ID: 0 [ 59.035542] Enabling fast FPU save and restore... done. [ 59.041309] Enabling unmasked SIMD FPU exception support... done. [ 59.048016] Checking 'hlt' instruction... OK. [ 59.080136] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 59.086972] Booting processor 1/1 eip 2000 [ 59.091793] CPU 1 irqstacks, hard=c04ad000 soft=c04ab000 [ 59.108444] Initializing CPU#1 [ 59.168751] Calibrating delay using timer specific routine.. 5211.13 BogoMIPS (lpj=2605565) [ 59.168778] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 59.168781] CPU: L2 cache: 512K [ 59.168783] CPU: Physical Processor ID: 0 [ 59.168856] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 59.202680] Total of 2 processors activated (10428.09 BogoMIPS). [ 59.209669] ENABLING IO-APIC IRQs [ 59.213624] ..TIMER: vector=0x31 pin1=2 pin2=-1 [ 59.330346] checking TSC synchronization across 2 CPUs: passed. [ 0.001126] softlockup thread 0 started up. [ 0.006208] Brought up 2 CPUs [ 0.006212] softlockup thread 1 started up. [ 0.015547] NET: Registered protocol family 16 [ 0.020840] ACPI: bus type pci registered [ 0.031770] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3 [ 0.039246] PCI: Using configuration type 1 [ 0.044065] mtrr: v2.0 (20020519) [ 0.053650] ACPI: Subsystem revision 20050408 [ 0.076461] ACPI: Interpreter enabled [ 0.080647] ACPI: Using IOAPIC for interrupt routing [ 0.087348] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.093001] PCI: Probing PCI hardware (bus 00) [ 0.098351] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 0.109324] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 0.148678] ACPI: Power Resource [URP1] (off) [ 0.153839] ACPI: Power Resource [URP2] (off) [ 0.159074] ACPI: Power Resource [FDDP] (off) [ 0.164369] ACPI: Power Resource [LPTP] (off) [ 0.171098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.180074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.189049] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.197982] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.206765] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.217033] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.227290] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.237476] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.246126] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.252787] pnp: PnP ACPI init [ 0.262969] pnp: PnP ACPI: found 10 devices [ 0.268221] usbcore: registered new driver usbfs [ 0.273579] usbcore: registered new driver hub [ 0.278935] PCI: Using ACPI for IRQ routing [ 0.283850] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.302146] Initializing Cryptographic API [ 0.306846] kgdb <20030915.1651.33> : port =3f8, IRQ=4, divisor =1 [ 0.319697] Linux agpgart interface v0.101 (c) Dave Jones [ 0.325969] agpgart: Detected an Intel 845G Chipset. [ 0.334443] agpgart: AGP aperture is 64M @ 0xe0000000 [ 0.340252] [drm] Initialized drm 1.0.0 20040925 [ 0.345761] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.354442] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE] [ 0.365631] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.376768] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.382598] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.388107] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled [ 0.398582] parport: PnPBIOS parport detected. [ 0.403753] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] [ 0.411384] io scheduler noop registered [ 0.416009] io scheduler anticipatory registered [ 0.421339] io scheduler deadline registered [ 0.426170] io scheduler cfq registered [ 0.431133] 8139too Fast Ethernet driver 0.9.27 [ 0.436499] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.445523] eth0: RealTek RTL8139 at 0xe080ef00, 00:0c:6e:aa:a2:81, IRQ 17 [ 0.453639] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 0.460798] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 0.469803] ICH4: IDE controller at PCI slot 0000:00:1f.1 [ 0.476160] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.484622] ICH4: chipset revision 2 [ 0.488844] ICH4: not 100% native mode: will probe irqs later [ 0.495284] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA [ 0.503706] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 0.776261] hda: QUANTUM FIREBALLlct10 20, ATA DISK drive [ 1.037554] hdb: IC35L120AVV207-0, ATA DISK drive [ 1.094778] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.770564] hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive [ 2.031857] hdd: Maxtor 6Y160P0, ATA DISK drive [ 2.088886] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.141045] hda: max request size: 128KiB [ 4.150378] hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) [ 4.159549] hda: cache flushes not supported [ 4.164717] hda: hda1 hda2 hda3 [ 4.175958] hdb: max request size: 1024KiB [ 4.187616] hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) [ 4.197988] hdb: cache flushes supported [ 4.202695] hdb: hdb1 [ 4.212857] hdd: max request size: 1024KiB [ 4.218543] hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33) [ 4.228403] hdd: cache flushes supported [ 4.233154] hdd: hdd1 [ 4.239959] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 4.247775] Uniform CD-ROM driver Revision: 3.20 [ 4.255363] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 4.263891] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [ 4.274525] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.279965] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 4.288714] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdffffc00 [ 4.299304] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 4.308567] usb usb1: Product: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [ 4.318796] usb usb1: Manufacturer: Linux 2.6.12-rc3-mm3 ehci_hcd [ 4.325944] usb usb1: SerialNumber: 0000:00:1d.7 [ 4.331436] hub 1-0:1.0: USB hub found [ 4.335854] hub 1-0:1.0: 6 ports detected [ 4.361536] USB Universal Host Controller Interface driver v2.3 [ 4.368684] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 4.377163] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [ 4.388461] uhci_hcd 0000:00:1d.0: detected 2 ports [ 4.393982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.402474] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400 [ 4.409328] usb usb2: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [ 4.420917] usb usb2: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 4.428067] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.433539] hub 2-0:1.0: USB hub found [ 4.437917] hub 2-0:1.0: 2 ports detected [ 4.445319] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 4.453966] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [ 4.465300] uhci_hcd 0000:00:1d.1: detected 2 ports [ 4.470865] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.479560] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 4.486088] usb usb3: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [ 4.497609] usb usb3: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 4.504803] usb usb3: SerialNumber: 0000:00:1d.1 [ 4.510099] hub 3-0:1.0: USB hub found [ 4.514460] hub 3-0:1.0: 2 ports detected [ 4.522125] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 4.530795] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [ 4.542554] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.548286] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.557031] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 4.563796] usb usb4: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [ 4.575339] usb usb4: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 4.582531] usb usb4: SerialNumber: 0000:00:1d.2 [ 4.587995] hub 4-0:1.0: USB hub found [ 4.592457] hub 4-0:1.0: 2 ports detected [ 4.600075] mice: PS/2 mouse device common for all mice [ 4.606102] Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). [ 4.618198] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 4.646405] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 4.807856] ALSA device list: [ 4.811258] #0: Yamaha DS-XG (YMF724) at 0xdfef8000, irq 17 [ 4.817951] NET: Registered protocol family 2 [ 4.836230] IP: routing cache hash table of 2048 buckets, 32Kbytes [ 4.843651] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 4.852344] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 4.860685] TCP: Hash tables configured (established 32768 bind 32768) [ 4.868196] NET: Registered protocol family 1 [ 4.873347] NET: Registered protocol family 17 [ 4.878565] Testing NMI watchdog ... OK. [ 4.892901] Starting balanced_irq [ 4.899770] VFS: Mounted root (ext2 filesystem) readonly. [ 4.906109] Freeing unused kernel memory: 188k freed [ 4.932580] logips2pp: Detected unknown logitech mouse model 1 [ 5.085719] input: PS/2 Logitech Mouse on isa0060/serio1 [ 9.054427] Adding 976744k swap on /dev/hda2. Priority:-1 extents:1 [ 12.020121] Real Time Clock Driver v1.12 [ 12.288005] kjournald starting. Commit interval 5 seconds [ 12.294362] EXT3 FS on hda3, internal journal [ 12.294370] EXT3-fs: mounted filesystem with ordered data mode. [ 12.324542] kjournald starting. Commit interval 5 seconds [ 12.324558] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 12.330985] EXT3 FS on hdb1, internal journal [ 12.330993] EXT3-fs: mounted filesystem with ordered data mode. [ 12.365343] kjournald starting. Commit interval 5 seconds [ 12.365360] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 12.371648] EXT3 FS on hdd1, internal journal [ 12.371655] EXT3-fs: mounted filesystem with ordered data mode. [ 14.902826] hw_random: RNG not detected [ 15.358481] Linux video capture interface: v1.00 [ 15.622036] bttv: driver version 0.9.15 loaded [ 15.627248] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 15.636367] bttv: Bt8xx card found (0). [ 15.640845] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 15.649480] bttv0: Bt878 (rev 2) at 0000:03:07.0, irq: 16, latency: 32, mmio: 0xdfbfe000 [ 15.658922] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 15.667951] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 15.677785] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 15.782048] tveeprom: Hauppauge: model = 38104, rev = B208, serial# = 1382576 [ 15.790266] tveeprom: tuner = Philips FI1216 MK2 (idx = 8, type = 5) [ 15.797761] tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007) [ 15.805927] tveeprom: audio_processor = None (type = 0) [ 15.811902] bttv0: using tuner=5 [ 15.815550] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 15.824642] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 15.833858] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 15.868065] tvaudio: TV audio decoder + audio/video mux driver [ 15.874836] tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z [ 15.907626] bttv0: i2c: checking for TDA9887 @ 0x86... not found [ 15.963376] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 15.969884] tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 16.011758] bttv0: registered device video0 [ 16.017699] bttv0: registered device vbi0 [ 16.022420] bttv0: PLL: 28636363 => 35468950 .. ok [ 17.348726] input: PC Speaker [ 17.668241] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 133.388194] RPC: failed to contact portmap (errno -512). [ 138.874199] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kGdb|Fgdb kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount [ 140.710085] SysRq : Emergency Remount R/O [ 140.728578] Emergency Remount complete [ 154.803890] SysRq : Trigger a crashdump ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-18 7:58 ` kexec? Borislav Petkov @ 2005-05-20 10:52 ` Vivek Goyal 2005-05-21 8:20 ` kexec? Borislav Petkov 0 siblings, 1 reply; 15+ messages in thread From: Vivek Goyal @ 2005-05-20 10:52 UTC (permalink / raw) To: Borislav Petkov Cc: vgoyal, maneesh, coywolf, Ralf Hildebrandt, linux-kernel, Fastboot mailing list, Eric W. Biederman On Wed, May 18, 2005 at 09:58:03AM +0200, Borislav Petkov wrote: > On Tuesday 17 May 2005 12:02, Vivek Goyal wrote: > > On Tue, May 17, 2005 at 12:11:43AM +0200, Borislav Petkov wrote: > > Hi, > > > > > <snip> > > > > > > > It will be nice if you could try kdump also on the similar lines. > > > > > > HI, > > > > > > After patching kexec-tools with the kdump patch here's what I did > > > according to the test plan: > > > > > > 0. load kernel with crashkernel=64M@16M > > > 1. kexec -p vmlinux --args-linux --append="root=/dev/hda1 init 1" (loads > > > fine) 2. sysrq+c > > > the system issues here : SysRq: Trigger a crashdump and hangs so that > > > even SysRq is dead. > > > > Thanks for testing this out. So kexec on panic seems to be hanging. Are you > > booted in first kernel with commandline option nmi_watchdog? We have a > > known issue with nmi_watchdog and just now I have posted a patch. > > No, my kernel commandline options are: root=/dev/hda1 vga=0 > crashkernel=64M@16M Boris, I used your config files and it is working for me. I disabled kgdb from your first config and enabled serial console output in second config. > > > Could you please try loading the new kernel with --console-vga or > > --console-serial option (depending on what console you are on) and post > > the output. > > Same thing happens - total lockup. Second kernel did not have serial console output enabled in config file. Is it possible to test it out once again with serial console enabled. May be disable kgdb in first kernel. With --console-serial option enabled while loading panic kernel (kexec -p) I am expecting at least following message on serial console after Sysrq-c. "I am in purgatory". It gives me some indicator whether purgatory code started execution or not. Thanks Vivek ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-20 10:52 ` kexec? Vivek Goyal @ 2005-05-21 8:20 ` Borislav Petkov 2005-05-23 6:42 ` kexec? Maneesh Soni 0 siblings, 1 reply; 15+ messages in thread From: Borislav Petkov @ 2005-05-21 8:20 UTC (permalink / raw) To: vgoyal Cc: maneesh, coywolf, Ralf Hildebrandt, linux-kernel, Fastboot mailing list, Eric W. Biederman [-- Attachment #1: Type: text/plain, Size: 613 bytes --] <snip> > Second kernel did not have serial console output enabled in config file. Is > it possible to test it out once again with serial console enabled. May be > disable kgdb in first kernel. > > With --console-serial option enabled while loading panic kernel (kexec -p) > I am expecting at least following message on serial console after Sysrq-c. > > "I am in purgatory". > HI Vivek, well kgdb was the offending problem here. After disabling it and booting into the first kernel, everything worked just fine. I even got to save /proc/vmcore successfully so kdump works also :) Log attached. Regards, Boris. [-- Attachment #2: minicom.cap --] [-- Type: text/plain, Size: 32357 bytes --] [4294667.296000] Linux version 2.6.12-rc3-mm3 (boris@zmei) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #15 SMP Sat May 21 09:31:23 CEST 2005 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000ce000 - 00000000000d60ac (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) [4294667.296000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) [4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [4294667.296000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) [4294667.296000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [4294667.296000] 511MB LOWMEM available. [4294667.296000] found SMP MP-table at 000fbad0 [4294667.296000] DMI 2.3 present. [4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [4294667.296000] Processor #0 15:2 APIC version 20 [4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [4294667.296000] Processor #1 15:2 APIC version 20 [4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs [4294667.296000] Using ACPI (MADT) for SMP configuration information [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [4294667.296000] Built 1 zonelists [4294667.296000] Initializing CPU#0 [4294667.296000] Kernel command line: root=/dev/hda1 vga=0 crashkernel=64M@16M console=ttyS0,115200 console=tty0 [4294667.296000] CPU 0 irqstacks, hard=c04a4000 soft=c04a2000 [4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes) [ 0.000000] Detected 2606.778 MHz processor. [ 29.152157] Using tsc for high-res timesource [ 29.153086] Console: colour VGA+ 80x25 [ 29.382716] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 29.391290] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 29.408168] Memory: 449292k/524224k available (2245k kernel code, 74444k reserved, 1259k data, 188k init, 0k highmem) [ 29.419819] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 29.488724] Calibrating delay using timer specific routine.. 5216.98 BogoMIPS (lpj=2608494) [ 29.497995] Security Framework v1.0.0 initialized [ 29.503168] Capability LSM initialized [ 29.507319] Mount-cache hash table entries: 512 [ 29.512525] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 29.518196] CPU: L2 cache: 512K [ 29.521655] CPU: Physical Processor ID: 0 [ 29.526072] Enabling fast FPU save and restore... done. [ 29.531838] Enabling unmasked SIMD FPU exception support... done. [ 29.538536] Checking 'hlt' instruction... OK. [ 29.570651] CPU0: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 29.577539] Booting processor 1/1 eip 2000 [ 29.582366] CPU 1 irqstacks, hard=c04a5000 soft=c04a3000 [ 29.599008] Initializing CPU#1 [ 29.659283] Calibrating delay using timer specific routine.. 5211.17 BogoMIPS (lpj=2605585) [ 29.659309] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 29.659312] CPU: L2 cache: 512K [ 29.659314] CPU: Physical Processor ID: 0 [ 29.659419] CPU1: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 [ 29.693310] Total of 2 processors activated (10428.15 BogoMIPS). [ 29.700267] ENABLING IO-APIC IRQs [ 29.704241] ..TIMER: vector=0x31 pin1=2 pin2=-1 [ 29.820874] checking TSC synchronization across 2 CPUs: passed. [ 0.001146] softlockup thread 0 started up. [ 0.007040] Brought up 2 CPUs [ 0.007042] softlockup thread 1 started up. [ 0.016618] NET: Registered protocol family 16 [ 0.021922] ACPI: bus type pci registered [ 0.033190] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3 [ 0.040690] PCI: Using configuration type 1 [ 0.045647] mtrr: v2.0 (20020519) [ 0.055316] ACPI: Subsystem revision 20050408 [ 0.078076] ACPI: Interpreter enabled [ 0.082308] ACPI: Using IOAPIC for interrupt routing [ 0.089019] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.094679] PCI: Probing PCI hardware (bus 00) [ 0.099870] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 0.110827] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 0.150983] ACPI: Power Resource [URP1] (off) [ 0.156137] ACPI: Power Resource [URP2] (off) [ 0.161460] ACPI: Power Resource [FDDP] (off) [ 0.166783] ACPI: Power Resource [LPTP] (off) [ 0.173624] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.182589] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.191555] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.200633] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.209524] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.219778] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.230273] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.240761] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.249428] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.255964] pnp: PnP ACPI init [ 0.266152] pnp: PnP ACPI: found 10 devices [ 0.271406] usbcore: registered new driver usbfs [ 0.276939] usbcore: registered new driver hub [ 0.282340] PCI: Using ACPI for IRQ routing [ 0.287161] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.305977] Initializing Cryptographic API [ 0.316346] Linux agpgart interface v0.101 (c) Dave Jones [ 0.322882] agpgart: Detected an Intel 845G Chipset. [ 0.331033] agpgart: AGP aperture is 64M @ 0xe0000000 [ 0.337047] [drm] Initialized drm 1.0.0 20040925 [ 0.342362] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.351262] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 SE] [ 0.362502] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.373374] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.379377] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.385247] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled [ 0.394640] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.401629] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.407853] parport: PnPBIOS parport detected. [ 0.413089] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] [ 0.420879] io scheduler noop registered [ 0.425439] io scheduler anticipatory registered [ 0.430856] io scheduler deadline registered [ 0.435905] io scheduler cfq registered [ 0.440571] 8139too Fast Ethernet driver 0.9.27 [ 0.445948] ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.454614] eth0: RealTek RTL8139 at 0xe080ef00, 00:0c:6e:aa:a2:81, IRQ 17 [ 0.462567] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 0.470028] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 0.479259] ICH4: IDE controller at PCI slot 0000:00:1f.1 [ 0.485560] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.493958] ICH4: chipset revision 2 [ 0.498179] ICH4: not 100% native mode: will probe irqs later [ 0.504636] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA [ 0.513069] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 0.786131] hda: QUANTUM FIREBALLlct10 20, ATA DISK drive [ 1.047794] hdb: IC35L120AVV207-0, ATA DISK drive [ 1.105683] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.782518] hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive [ 2.043831] hdd: Maxtor 6Y160P0, ATA DISK drive [ 2.101246] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.154186] hda: max request size: 128KiB [ 4.163476] hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) [ 4.172897] hda: cache flushes not supported [ 4.178676] hda: hda1 hda2 hda3 [ 4.188475] hdb: max request size: 1024KiB [ 4.201334] hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) [ 4.211386] hdb: cache flushes supported [ 4.216465] hdb: hdb1 [ 4.224338] hdd: max request size: 1024KiB [ 4.229885] hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33) [ 4.239817] hdd: cache flushes supported [ 4.244461] hdd: hdd1 [ 4.253378] hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 4.261224] Uniform CD-ROM driver Revision: 3.20 [ 7.194905] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 [ 7.203618] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [ 7.214312] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.219537] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 7.228274] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdffffc00 [ 7.238877] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 7.248197] usb usb1: Product: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [ 7.258483] usb usb1: Manufacturer: Linux 2.6.12-rc3-mm3 ehci_hcd [ 7.265509] usb usb1: SerialNumber: 0000:00:1d.7 [ 7.270949] hub 1-0:1.0: USB hub found [ 7.275377] hub 1-0:1.0: 6 ports detected [ 7.302020] USB Universal Host Controller Interface driver v2.3 [ 7.309186] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 7.317966] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [ 7.329980] uhci_hcd 0000:00:1d.0: detected 2 ports [ 7.335729] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.344460] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400 [ 7.351178] usb usb2: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [ 7.362472] usb usb2: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 7.369438] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.374788] hub 2-0:1.0: USB hub found [ 7.379331] hub 2-0:1.0: 2 ports detected [ 7.386800] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 7.395460] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [ 7.407457] uhci_hcd 0000:00:1d.1: detected 2 ports [ 7.413193] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 7.421953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 [ 7.428849] usb usb3: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [ 7.440358] usb usb3: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 7.447574] usb usb3: SerialNumber: 0000:00:1d.1 [ 7.453172] hub 3-0:1.0: USB hub found [ 7.457623] hub 3-0:1.0: 2 ports detected [ 7.465583] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 7.474293] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [ 7.486319] uhci_hcd 0000:00:1d.2: detected 2 ports [ 7.492041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.500607] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00 [ 7.507507] usb usb4: Product: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [ 7.518941] usb usb4: Manufacturer: Linux 2.6.12-rc3-mm3 uhci_hcd [ 7.525906] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.531466] hub 4-0:1.0: USB hub found [ 7.535913] hub 4-0:1.0: 2 ports detected [ 7.543534] mice: PS/2 mouse device common for all mice [ 7.549746] Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). [ 7.561635] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 7.589578] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 7.751269] ALSA device list: [ 7.754669] #0: Yamaha DS-XG (YMF724) at 0xdfef8000, irq 17 [ 7.761568] NET: Registered protocol family 2 [ 7.776758] IP: routing cache hash table of 2048 buckets, 32Kbytes [ 7.784381] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 7.793266] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 7.801688] TCP: Hash tables configured (established 32768 bind 32768) [ 7.809372] NET: Registered protocol family 1 [ 7.814547] NET: Registered protocol family 17 [ 7.819865] Starting balanced_irq [ 7.826744] VFS: Mounted root (ext2 filesystem) readonly. [ 7.833076] Freeing unused kernel memory: 188k freed [ 7.859710] logips2pp: Detected unknown logitech mouse model 1 [ 8.002033] input: PS/2 Logitech Mouse on isa0060/serio1 [ 11.992280] Adding 976744k swap on /dev/hda2. Priority:-1 extents:1 [ 15.049056] Real Time Clock Driver v1.12 [ 15.303095] kjournald starting. Commit interval 5 seconds [ 15.309286] EXT3 FS on hda3, internal journal [ 15.309294] EXT3-fs: mounted filesystem with ordered data mode. [ 15.337127] kjournald starting. Commit interval 5 seconds [ 15.337143] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 15.343603] EXT3 FS on hdb1, internal journal [ 15.343609] EXT3-fs: mounted filesystem with ordered data mode. [ 15.378777] kjournald starting. Commit interval 5 seconds [ 15.378794] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 15.385251] EXT3 FS on hdd1, internal journal [ 15.385257] EXT3-fs: mounted filesystem with ordered data mode. [ 17.661267] hw_random: RNG not detected [ 17.951103] Linux video capture interface: v1.00 [ 19.872678] input: PC Speaker [ 20.181694] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 202.914568] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount [ 208.817716] SysRq : Emergency Sync [ 218.157484] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount [ 222.164005] SysRq : Emergency Remount R/O [ 229.161781] SysRq : HELP : loglevel0-8 reBoot Crashdump tErm Full kIll saK showMem Nice powerOff showPc unRaw Sync showTasks Unmount [ 230.274406] SysRq : Trigger a crashdump I'm in purgatory Linux version 2.6.12-rc3-mm3-kdump (boris@zmei) (gcc version 3.3.6 (Debian 1:3.3.6-5)) #3 Sat May 21 09:25:41 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d60ac (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 0000000001000000 - 0000000001449000 (usable) user: 00000000014e9400 - 0000000005000000 (usable) 0MB HIGHMEM available. 80MB LOWMEM available. DMI 2.3 present. Allocating PCI resources starting at 05000000 (gap: 05000000:fb000000) Built 1 zonelists Initializing CPU#0 Kernel command line: root=/dev/hda1 console=tty0 console=ttyS0,115200 init 1 memmap=exactmap memmap=640K@0K memmap=4388K@16384K memmap=60507K@21413K elfcorehdr=21412K PID hash table entries: 512 (order: 9, 8192 bytes) Detected 2606.033 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Unknown interrupt or fault at EIP 00000292 00000060 c13e59c0 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 60268k/81920k available (2853k kernel code, 5088k reserved, 1078k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5216.50 BogoMIPS (lpj=2608250) Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e68) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *10), disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report audit: initializing netlink socket (disabled) audit(1116670046.359:0): initialized inotify device minor=63 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 8 throttling states) lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized drm 1.0.0 20040925 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered floppy0: no floppy controllers found 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 6 PCI: setting IRQ 6 as level-triggered ACPI: PCI Interrupt 0000:03:0a.0[A] -> Link [LNKB] -> GSI 6 (level, low) -> IRQ 6 eth0: RealTek RTL8139 at 0xd800, 00:0c:6e:aa:a2:81, IRQ 6 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALLlct10 20, ATA DISK drive hdb: IC35L120AVV207-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive hdd: Maxtor 6Y160P0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hda3 hdb: max request size: 1024KiB hdb: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdd: max request size: 1024KiB hdd: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(33) hdd: cache flushes supported hdd: hdd1 hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugs is not available ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xdffffc00 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 3, io base 0x0000e800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000ec00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC). ALSA device list: No soundcards found. oprofile: using timer interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) ip_conntrack version 2.1 (640 buckets, 5120 max) - 212 bytes per conntrack input: AT Translated Set 2 keyboard on isa0060/serio0 ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: USB1 USB2 USB3 EHCI ICHB PS2M PS2K UAR1 MC9 ACPI: (supports S0 S1 S4 S4bios S5) VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 172k freed logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse on isa0060/serio1 INIT: version 2.86 booting Mounting a tmpfs over /dev...done. Creating initial device nodes...done. Setting parameters of disc: (none). Activating swap. Adding 976744k swap on /dev/hda2. Priority:-1 extents:1 Checking root file system... fsck 1.38-WIP (09-May-2005) /: clean, 149577/1831424 files, 1195690/3662056 blocks System time was Sat May 21 08:07:38 UTC 2005. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sat May 21 10:07:40 CEST 2005. Cleaning up ifupdown...done. Calculating module dependencies... done. Loading modules... ide-cd FATAL: Module ide_cd not found. ide-generic FATAL: Module ide_generic not found. rtc FATAL: Module rtc not found. All modules loaded. Checking all file systems... fsck 1.38-WIP (09-May-2005) /home: clean, 14509/539616 files, 341093/1078308 blocks (check after next mount) Setting kernel variables ... ... done. Mounting local filesystems... kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds /dev/hda3 on /home type ext3 (rw) /dev/hdb1 on /mnt/istorage tyEXT3 FS on hdd1, internal journal EXT3-fs: mounted filesystem with ordered data mode. pe ext3 (rw) /dev/hdd1 on /mnt/mstorage type ext3 (rw) Cleaning /tmp /var/run /var/lock. Detecting hardware: i810_rng i810_tco 8139too piix ymfpci usb_uhci ehci_hcd Skipping unavailable/built-in i810_rng module. Skipping unavailable/built-in i810_tco module. Skipping unavailable/built-in 8139too module. Skipping unavailable/built-in piix module. ymfpci disabled in configuration. Skipping unavailable/built-in uhci_hcd module. Skipping unavailable/built-in ehci_hcd module. Running 0dns-down to make sure resolv.conf is ok...done. Setting up networking...done. Cleaning up /var/run/pppX-up files that might have been left by pppstatus . Starting hotplug subsystem: pci ignoring pci display device 01:00.0 pci [success] usb usb [success] isapnp isapnp [success] ide ide [success] input input [success] scsi scsi [success] done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces...eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 done. Starting portmap daemon: portmap. Starting portmapper...Mounting remote filesystems... NFSv3 not supported! mount: wrong fs type, bad option, bad superblock on 192.168.45.67:/root/zmei, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so NFSv3 not supported! mount: wrong fs type, bad option, bad superblock on 192.168.45.67:/var/cache/apt/archives, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so Loading the saved-state of the serial devices... Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Sat May 21 10:07:48 CEST 2005 Running ntpdate to synchronize clockError : Temporary failure in name resolution . Initializing random number generator...done. Optimizing hardware... Recovering nvi editor sessions... done. Setting up X server socket directory /tmp/.X11-unix...done. Setting up ICE socket directory /tmp/.ICE-unix...done. INIT: Entering runlevel: 1 Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Entering single-user mode... Going single user INIT: Sending processes the TERM signal Give root password for maintenance (or type Control-D to continue): [root@zmei:10:08:21:~:502)-> cp /proc/vm\acore . cp: overwrite `./vmcore'? y `/proc/vmcore' -> `./vmcore' [root@zmei:10:08:58:~:503)-> d total 449M drwx------ 3 root root 4.0K Oct 23 2004 Desktop -rw-r--r-- 1 root root 3.4K Mar 21 11:40 XF86Config.new -rw-r--r-- 1 root root 182 Dec 2 19:15 apt.conf drwxr-xr-x 2 root root 4.0K May 16 08:48 bin drwxr-xr-x 2 root root 4.0K May 16 08:48 cdrecord -rw-r--r-- 1 root root 180 Oct 22 2004 dbootstrap_settings -rwxr-xr-x 1 root root 149 Mar 25 14:54 fw.sh -rw-r--r-- 1 root root 1.4K Oct 22 2004 install-report.template -rw-r--r-- 1 root root 190 May 21 10:06 kexec.log -rw-r----- 1 root root 0 May 18 09:31 lock -rw-r--r-- 1 root root 107 Mar 17 12:03 minicom.log drwxr-xr-x 4 root root 4.0K Oct 22 2004 old drwxr-xr-x 2 root root 4.0K May 20 21:56 tmp -r-------- 1 root root 448M May 21 10:08 vmcore [root@zmei:10:09:03:~:504)-> mknod /dev/oldmem c 1 12 mknod: `/dev/oldmem': File exists [root@zmei:10:09:26:~:505)-> dd if=/dev/ild\b \b\b \b\b \boldmen\b \bm of=oldmem.001 1048456+0 records in 1048456+0 records out 536809472 bytes transferred in 28.358408 seconds (18929464 bytes/sec) [root@zmei:10:10:12:~:506)-> d total 961M drwx------ 3 root root 4.0K Oct 23 2004 Desktop -rw-r--r-- 1 root root 3.4K Mar 21 11:40 XF86Config.new -rw-r--r-- 1 root root 182 Dec 2 19:15 apt.conf drwxr-xr-x 2 root root 4.0K May 16 08:48 bin drwxr-xr-x 2 root root 4.0K May 16 08:48 cdrecord -rw-r--r-- 1 root root 180 Oct 22 2004 dbootstrap_settings -rwxr-xr-x 1 root root 149 Mar 25 14:54 fw.sh -rw-r--r-- 1 root root 1.4K Oct 22 2004 install-report.template -rw-r--r-- 1 root root 190 May 21 10:06 kexec.log -rw-r----- 1 root root 0 May 18 09:31 lock -rw-r--r-- 1 root root 107 Mar 17 12:03 minicom.log drwxr-xr-x 4 root root 4.0K Oct 22 2004 old -rw-r--r-- 1 root root 512M May 21 10:10 oldmem.001 drwxr-xr-x 2 root root 4.0K May 20 21:56 tmp -r-------- 1 root root 448M May 21 10:08 vmcore [root@zmei:10:10:17:~:508)-> reboot INIT: Switching to runlevel: 6 [root@zmei:10:10:37:~:509)-> INIT: Sending processes the TERM signal INIT: K01kdm: exit 0 1l Stopping X display manager: xdm not running (/var/run/xdm.pid not found) . Stopping periodic command scheduler: cron. Stopping apt-proxy. K20dictd: exit 0 1l Stopping DirMngr: dirmngr. Stopping MTA: exim4. Stopping internet superserver: inetd. K20postgresql: exit 0 on 1L Stopping OpenBSD Secure Shell server: sshd. Stopping Network Traffic Monitoring Programs: tleds. Stopping udftools packet writing: /dev/pktcdvd/dvdwriter=/dev/hdc FATAL: Module pktcdvd not found. Can't find pktcdvd character device ctl open: No such file or directory ERROR: Module pktcdvd does not exist in /proc/modules Stopping X font server: xfs not running (/var/run/xfs.pid not found) . Stopping Xprint servers: Xprt. Saving the System Clock time to the Hardware Clock... Hardware Clock updated to Sat May 21 10:10:46 CEST 2005. Shutting down ALSA...done. Stopping NFS common utilities: statd. Stopping NFS kernel daemon: mountd nfsd. Unexporting directories for NFS kernel daemon...done. Stopping deferred execution scheduler: atd. Stopping kernel log daemon: klogd. Stopping system log daemon: syslogd. Stopping web server: Apache2 ... no pidfile found! not running?. /etc/init.d/rc: line 30: /etc/rc6.d/K91hsf: Permission denied Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Saving random seed...done. Unmounting remote and non-toplevel virtual filesystems...done. Stopping portmap daemon: portmap. Deconfiguring network interfaces...done. Deactivating swap...umount: none busy - remounted read-only done. Unmounting local filesystems...umount: none busy - remounted read-only done. Rebooting... Restarting system. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: kexec? 2005-05-21 8:20 ` kexec? Borislav Petkov @ 2005-05-23 6:42 ` Maneesh Soni 0 siblings, 0 replies; 15+ messages in thread From: Maneesh Soni @ 2005-05-23 6:42 UTC (permalink / raw) To: Borislav Petkov Cc: vgoyal, coywolf, Ralf Hildebrandt, linux-kernel, Fastboot mailing list, Eric W. Biederman On Sat, May 21, 2005 at 10:20:35AM +0200, Borislav Petkov wrote: > <snip> > > Second kernel did not have serial console output enabled in config file. Is > > it possible to test it out once again with serial console enabled. May be > > disable kgdb in first kernel. > > > > With --console-serial option enabled while loading panic kernel (kexec -p) > > I am expecting at least following message on serial console after Sysrq-c. > > > > "I am in purgatory". > > > HI Vivek, > > well kgdb was the offending problem here. After disabling it and booting into > the first kernel, everything worked just fine. I even got to > save /proc/vmcore successfully so kdump works also :) Log attached. > > Regards, > Boris. Thanks Boris, I have updated this on the test webpage. I have also noted the issue of kgdb interactions. http://lse.sourceforge.net/kdump/kdump-test.html Thanks Maneesh -- Maneesh Soni Linux Technology Center, IBM India Software Labs, Bangalore, India email: maneesh@in.ibm.com Phone: 91-80-25044990 ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2005-05-23 6:43 UTC | newest] Thread overview: 15+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-05-08 20:20 kexec? Ralf Hildebrandt 2005-05-10 1:34 ` kexec? Randy.Dunlap 2005-05-10 7:00 ` kexec? Coywolf Qi Hunt 2005-05-10 10:15 ` kexec? Borislav Petkov 2005-05-10 13:11 ` kexec? Coywolf Qi Hunt 2005-05-11 6:04 ` kexec? Maneesh Soni 2005-05-11 11:51 ` kexec? Borislav Petkov 2005-05-11 14:39 ` kexec? Coywolf Qi Hunt 2005-05-12 6:41 ` kexec? Maneesh Soni 2005-05-16 22:11 ` kexec? Borislav Petkov 2005-05-17 10:02 ` kexec? Vivek Goyal 2005-05-18 7:58 ` kexec? Borislav Petkov 2005-05-20 10:52 ` kexec? Vivek Goyal 2005-05-21 8:20 ` kexec? Borislav Petkov 2005-05-23 6:42 ` kexec? Maneesh Soni
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox