public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: akpm@osdl.org, linux-kernel@vger.kernel.org
Subject: [patch 3/11] s390: ptrace peek and poke.
Date: Wed, 1 Jun 2005 20:02:41 +0200	[thread overview]
Message-ID: <20050601180241.GC6418@localhost.localdomain> (raw)

[patch 3/11] s390: ptrace peek and poke.

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

The special cases of peek and poke on acrs[15] and the fpc register
are not handled correctly. A poke on acrs[15] will clobber the 4
bytes after the access registers in the thread_info structure. That
happens to be the kernel stack pointer. A poke on the fpc with an
invalid value is not caught by the validity check. On the next
context switch the broken fpc value will cause a program check in
the kernel. Improving the checks in peek and poke fixes this.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

diffstat:
 arch/s390/kernel/ptrace.c |   48 +++++++++++++++++++++++++++++++++++++++++-----
 1 files changed, 43 insertions(+), 5 deletions(-)

diff -urpN linux-2.6/arch/s390/kernel/ptrace.c linux-2.6-patched/arch/s390/kernel/ptrace.c
--- linux-2.6/arch/s390/kernel/ptrace.c	2005-06-01 19:42:54.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/ptrace.c	2005-06-01 19:43:15.000000000 +0200
@@ -40,6 +40,7 @@
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/unistd.h>
 
 #ifdef CONFIG_S390_SUPPORT
 #include "compat_ptrace.h"
@@ -130,13 +131,19 @@ static int
 peek_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	struct user *dummy = NULL;
-	addr_t offset, tmp;
+	addr_t offset, tmp, mask;
 
 	/*
 	 * Stupid gdb peeks/pokes the access registers in 64 bit with
 	 * an alignment of 4. Programmers from hell...
 	 */
-	if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+	mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+	if (addr >= (addr_t) &dummy->regs.acrs &&
+	    addr < (addr_t) &dummy->regs.orig_gpr2)
+		mask = 3;
+#endif
+	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
 		return -EIO;
 
 	if (addr < (addr_t) &dummy->regs.acrs) {
@@ -153,6 +160,16 @@ peek_user(struct task_struct *child, add
 		 * access registers are stored in the thread structure
 		 */
 		offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+		/*
+		 * Very special case: old & broken 64 bit gdb reading
+		 * from acrs[15]. Result is a 64 bit value. Read the
+		 * 32 bit acrs[15] value and shift it by 32. Sick...
+		 */
+		if (addr == (addr_t) &dummy->regs.acrs[15])
+			tmp = ((unsigned long) child->thread.acrs[15]) << 32;
+		else
+#endif
 		tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset);
 
 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -167,6 +184,9 @@ peek_user(struct task_struct *child, add
 		 */
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
+		if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
+			tmp &= (unsigned long) FPC_VALID_MASK
+				<< (BITS_PER_LONG - 32);
 
 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
 		/*
@@ -191,13 +211,19 @@ static int
 poke_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	struct user *dummy = NULL;
-	addr_t offset;
+	addr_t offset, mask;
 
 	/*
 	 * Stupid gdb peeks/pokes the access registers in 64 bit with
 	 * an alignment of 4. Programmers from hell indeed...
 	 */
-	if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+	mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+	if (addr >= (addr_t) &dummy->regs.acrs &&
+	    addr < (addr_t) &dummy->regs.orig_gpr2)
+		mask = 3;
+#endif
+	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
 		return -EIO;
 
 	if (addr < (addr_t) &dummy->regs.acrs) {
@@ -224,6 +250,17 @@ poke_user(struct task_struct *child, add
 		 * access registers are stored in the thread structure
 		 */
 		offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+		/*
+		 * Very special case: old & broken 64 bit gdb writing
+		 * to acrs[15] with a 64 bit value. Ignore the lower
+		 * half of the value and write the upper 32 bit to
+		 * acrs[15]. Sick...
+		 */
+		if (addr == (addr_t) &dummy->regs.acrs[15])
+			child->thread.acrs[15] = (unsigned int) (data >> 32);
+		else
+#endif
 		*(addr_t *)((addr_t) &child->thread.acrs + offset) = data;
 
 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -237,7 +274,8 @@ poke_user(struct task_struct *child, add
 		 * floating point regs. are stored in the thread structure
 		 */
 		if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
-		    (data & ~FPC_VALID_MASK) != 0)
+		    (data & ~((unsigned long) FPC_VALID_MASK
+			      << (BITS_PER_LONG - 32))) != 0)
 			return -EINVAL;
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;

                 reply	other threads:[~2005-06-01 18:22 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050601180241.GC6418@localhost.localdomain \
    --to=schwidefsky@de.ibm.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox