From: Bernhard Rosenkraenzer <bero@arklinux.org>
To: linux-kernel@vger.kernel.org
Subject: 2.6.12-rc5-mm2: Problems with USB storage
Date: Sat, 4 Jun 2005 23:16:27 +0200 [thread overview]
Message-ID: <200506042316.27615.bero@arklinux.org> (raw)
Trying to use an USB 5-in-1 card reader that worked well last time I checked
(2.6.10-mm2) with 2.6.12-rc5-mm2 results in:
usb 2-1: new full speed USB device using uhci_hcd and address 3
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Generic Model: STORAGE DEVICE Rev: 9135
Type: Direct-Access ANSI SCSI revision: 00
usbcore: deregistering driver usb-storage
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0
lun 0
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
sda : READ CAPACITY failed.
sda : status=0, message=00, host=5, driver=04
sda : sense not available.
scsi1 (0:0): rejecting I/O to offline device
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
Trying to remove usb-storage (in an attempt to re-load it) Oopses:
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
usb-storage: device scan complete
BUG: atomic counter underflow at:
[<c01c985a>] kref_put+0x4f/0xa1
[<c01c8d1c>] unlink+0x29/0x2e
[<c01c8c49>] kobject_put+0x1e/0x22
[<c01c8ce9>] kobject_release+0x0/0xa
[<e086c85a>] scsi_remove_device+0x87/0xc0 [scsi_mod]
[<e086cb98>] __scsi_remove_target+0x70/0x8a [scsi_mod]
[<e086bb2f>] scsi_forget_host+0x2b/0x46 [scsi_mod]
[<e0864eec>] scsi_remove_host+0x12/0x10d [scsi_mod]
[<c01172e5>] default_wake_function+0x0/0x18
[<e0d7aa08>] storage_disconnect+0x62/0x7e [usb_storage]
[<e0d02207>] usb_unbind_interface+0x78/0x7a [usbcore]
[<c0228600>] __device_release_driver+0x82/0x84
[<c022868f>] driver_detach+0x62/0x64
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c0228085>] bus_remove_driver+0x3b/0xb2
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c02288a1>] driver_unregister+0x10/0x1c
[<e0d02317>] usb_deregister+0x34/0x42 [usbcore]
[<e0d817d3>] usb_stor_exit+0xf/0x2e [usb_storage]
[<c0131f55>] sys_delete_module+0x18a/0x1ee
[<c0102d73>] sysenter_past_esp+0x54/0x75
Unable to handle kernel paging request at virtual address 766f6d65
printing eip:
e086cb6b
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: sr_mod ide_cd cdrom vfat fat eeprom i2c_sensor radeon drm
i2c_algo_bit i2c_core intel_agp agpgart snd_intel8x0 snd_via82xx gameport
snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart
snd_rawmidi snd_seq_device snd soundcore psmouse evdev binfmt_misc md5 ipv6
pcmcia firmware_class yenta_socket rsrc_nonstatic pcmcia_core 8139too mii
af_packet sd_mod tcp_bic ohci1394 ieee1394 usb_storage scsi_mod ehci_hcd
uhci_hcd usbcore video thermal processor fan container button battery ac rtc
CPU: 0
EIP: 0060:[<e086cb6b>] Not tainted VLI
EFLAGS: 00010002 (2.6.12-0.rc5.3ark)
EIP is at __scsi_remove_target+0x43/0x8a [scsi_mod]
eax: 00000000 ebx: 766f6d5d ecx: 00000286 edx: 766f6d5d
esi: dad4fc00 edi: d78a7800 ebp: e0d87f08 esp: dd07fe2c
ds: 007b es: 007b ss: 0068
Process rmmod (pid: 3611, threadinfo=dd07f000 task=d745b030)
Stack: c5fa3c00 00000282 c78db800 dad4fc08 e086bb2f d78a7800 dad4fe50 dad4fc00
e0d87ec0 e0864eec dad4fc00 00000001 00000000 00000000 dad4fe58 00000292
00000001 d745b030 c01172e5 00100100 00200200 00000286 e0d87ec0 dd07fea4
Call Trace:
[<e086bb2f>] scsi_forget_host+0x2b/0x46 [scsi_mod]
[<e0864eec>] scsi_remove_host+0x12/0x10d [scsi_mod]
[<c01172e5>] default_wake_function+0x0/0x18
[<e0d7aa08>] storage_disconnect+0x62/0x7e [usb_storage]
[<e0d02207>] usb_unbind_interface+0x78/0x7a [usbcore]
[<c0228600>] __device_release_driver+0x82/0x84
[<c022868f>] driver_detach+0x62/0x64
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c0228085>] bus_remove_driver+0x3b/0xb2
[<e0d817c4>] usb_stor_exit+0x0/0x2e [usb_storage]
[<c02288a1>] driver_unregister+0x10/0x1c
[<e0d02317>] usb_deregister+0x34/0x42 [usbcore]
[<e0d817d3>] usb_stor_exit+0xf/0x2e [usb_storage]
[<c0131f55>] sys_delete_module+0x18a/0x1ee
[<c0102d73>] sysenter_past_esp+0x54/0x75
Code: 89 1c 24 e8 70 83 ff ff 85 c0 74 eb 8d b3 20 ff ff ff 9c 59 fa 83 87 14
01 00 00 01 8b 06 8d 50 f8 8b 5a 08 83 eb 08 eb 0b 89 da <8b> 5b 08 83 eb 08
8d 42 08 39 f0 74 29 8b 87 18 01 00 00 39 42
reply other threads:[~2005-06-04 21:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200506042316.27615.bero@arklinux.org \
--to=bero@arklinux.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox