From: Lukas Hejtmanek <xhejtman@mail.muni.cz>
To: Scott Bardone <sbardone@chelsio.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>,
Jeff Garzik <jgarzik@pobox.com>,
linux-kernel@vger.kernel.org
Subject: Re: Kernel 2.6.12-rc6-mm1 & Chelsio driver
Date: Wed, 8 Jun 2005 21:32:15 +0200 [thread overview]
Message-ID: <20050608193215.GF2369@mail.muni.cz> (raw)
In-Reply-To: <42A742FF.2020706@chelsio.com>
On Wed, Jun 08, 2005 at 12:11:59PM -0700, Scott Bardone wrote:
> You would need to use the cxgb-2.1.1 driver (NIC only). It is near the
> bottom of the webpage, under "Chelsio N210 / N110 10Gb Ethernet Server
> Adapter", Chelsio N210 / N110 Linux Driver - Version 2.1.1 (05/17/2005).
> <https://service.chelsio.com/drivers/linux/n210/cxgb-2.1.1.tar.gz>
> Use the above driver for the T110 in NIC mode. This driver will work for
> the T110 and T210 but only in NIC mode.
Unfortunately, this driver does not contain
CH_DEVICE(6, 0|1.. )
Should I just add it?
--
Lukáš Hejtmánek
next prev parent reply other threads:[~2005-06-08 19:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-08 17:33 Kernel 2.6.12-rc6-mm1 & Chelsio driver Scott Bardone
2005-06-08 18:49 ` Lukas Hejtmanek
2005-06-08 19:11 ` Scott Bardone
2005-06-08 19:32 ` Lukas Hejtmanek [this message]
2005-06-08 20:06 ` Scott Bardone
[not found] ` <42A74F88.10502@chelsio.com>
2005-06-16 23:22 ` Lukas Hejtmanek
-- strict thread matches above, loose matches on Subject: below --
2005-06-07 18:13 Lukas Hejtmanek
2005-06-07 18:50 ` Jeff Garzik
2005-06-07 18:58 ` Lukas Hejtmanek
2005-06-07 19:27 ` Jeff Garzik
2005-06-07 19:33 ` Lukas Hejtmanek
2005-06-07 20:08 ` Francois Romieu
2005-06-07 21:10 ` Lukas Hejtmanek
2005-06-07 22:42 ` Francois Romieu
2005-06-08 2:19 ` Scott Bardone
2005-06-08 6:50 ` Lukas Hejtmanek
2005-06-08 17:46 ` Christoph Hellwig
2005-06-08 18:43 ` Scott Bardone
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050608193215.GF2369@mail.muni.cz \
--to=xhejtman@mail.muni.cz \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
--cc=sbardone@chelsio.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox