From: Nick Warne <nick@linicks.net>
To: linux-kernel@vger.kernel.org
Subject: Re: 2 errors in 2.6.12
Date: Sun, 19 Jun 2005 12:25:50 +0100 [thread overview]
Message-ID: <200506191225.50522.nick@linicks.net> (raw)
In-Reply-To: <200506191104.28900.nick@linicks.net>
On Sunday 19 June 2005 11:04, you wrote:
> >and my SBLive! plays only on 2 repros Front left and right.
>
> Yes - I noticed something with my SB Live. I thought it was me, but going
> through everythnig this morning, I don't think it is.
>
> From 2.6.11.12 dmesg:
>
> Jun 17 18:39:45 linuxamd kernel: Advanced Linux Sound Architecture Driver
> Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
> Jun 17 18:39:45 linuxamd kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI
> 5 (level, low) -> IRQ 5
> Jun 17 18:39:45 linuxamd kernel: ALSA device list:
> Jun 17 18:39:45 linuxamd kernel: #0: Sound Blaster Live! (rev.7,
> serial:0x80611102) at 0xe000, irq 5
>
> And here from new 2.6.12 dmesg:
>
> Jun 18 15:27:41 linuxamd kernel: Advanced Linux Sound Architecture Driver
> Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
> Jun 18 15:27:41 linuxamd kernel: PCI: Found IRQ 5 for device 0000:00:0f.0
> Jun 18 15:27:41 linuxamd kernel: ALSA device list:
> Jun 18 15:27:41 linuxamd kernel: #0: SB Live [Unknown] (rev.7,
> serial:0x80611102) at 0xe000, irq 5
OK, I have found out why - an alsa-devel patch changed to be more specific on
the chipset/model - more here:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111209948526203&w=2
It turns out my card isn't in the ID list, so it gets given an 'unknown'. As
this changed from 2.6.11.12, alsamixer then reset (effectively a new card!)
so I had to reset all my mixer settings again - I would look at your mixer
settings for the surround sound settings (mute etc.).
Here is a page with the ID and chipsets of the cards:
http://www.digit-life.com/articles/livetolive51/
I am going to attempt to add my card into emu10k1_main.c to get it set right:
0 [Unknown ]: EMU10K1 - SB Live [Unknown]
SB Live [Unknown] (rev.7, serial:0x80611102) at 0xe000,
irq 5
>From that 'livetolive51' page I am told I have:
SB0060 - SBlive! Value (PCI\VEN_1102&DEV_0002&SUBSYS_80611102)
Nick
--
"When you're chewing on life's gristle,
Don't grumble, Give a whistle..."
next prev parent reply other threads:[~2005-06-19 11:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-19 10:04 2 errors in 2.6.12 Nick Warne
2005-06-19 11:25 ` Nick Warne [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-06-19 14:07 Nick Warne
2005-06-19 7:57 Michal Semler
[not found] ` <20050728214851.44877164.akpm@osdl.org>
2005-07-31 11:51 ` Michal Semler
2005-07-31 17:31 ` Andrew Morton
2005-07-31 17:53 ` Michael Krufky
2005-08-01 9:16 ` CIJOML
[not found] ` <1122894516.5340.9.camel@pc08.localdom.local>
[not found] ` <20050801201017.G77710@nebuchadnezzar.smejdil.cz>
2005-08-01 19:55 ` hermann pitton
2005-08-01 20:02 ` Michael Krufky
2005-08-01 18:03 ` CIJOML
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200506191225.50522.nick@linicks.net \
--to=nick@linicks.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox