init 0 stopped working

init 0 stopped working

[Martin Mokrejs]

Hi,
  I used to shutdown my P4 machine based on ASUS P4C800E-Deluxe
with simple "init 0" command. That somehow broke between 2.6.12-rc6-git2
and 2.6.13-rc1. The machines makes the sound like shutdown but it
immediately turns the power on again. I used acpi and the kernel
configs should be almost identical in all cases, as I just recopy
previously used .config and run "make oldconfig".

  Any clues? I still happens even with 2.6.13-rc3-git2.
Please Cc: me in replies.
Martin

Re: init 0 stopped working

[Martin Mokrejs]

>   I used to shutdown my P4 machine based on ASUS P4C800E-Deluxe
> with simple "init 0" command. That somehow broke between 2.6.12-rc6-git2
> and 2.6.13-rc1. The machines makes the sound like shutdown but it
> immediately turns the power on again. I used acpi and the kernel
> configs should be almost identical in all cases, as I just recopy
> previously used .config and run "make oldconfig".
> 
>   Any clues? I still happens even with 2.6.13-rc3-git2.

It was introduced after 2.6.12 but before or with 2.6.13-rc1.
It is not fixed by acpi-20050708 patch for 2.6.13 series.
I had KEXEC enabled and also disabled, but the problem still persists.

Re: init 0 stopped working

[Jose Luis Domingo Lopez]

[-- Attachment #1: Type: text/plain, Size: 512 bytes --]

On Saturday, 16 July 2005, at 02:09:47 +0200,
Martin Mokrejs wrote:

>   Any clues? I still happens even with 2.6.13-rc3-git2.
>
Check message with subject:
[2.6.12-git8] ACPI shutdown fails to power off machine
http://marc.theaimsgroup.com/?l=linux-kernel&m=112094139204799&w=2

So it seems there are more boxes out there suffering from the same 
problem I reported some days ago
.
Greetings,

-- 
Jose Luis Domingo Lopez
Linux Registered User #189436     Debian Linux Sid (Linux 2.6.13-rc2)


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: init 0 stopped working

[Michal Piotrowski]

Hi,

On 7/16/05, Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz> wrote:
> Hi,
>   I used to shutdown my P4 machine based on ASUS P4C800E-Deluxe
> with simple "init 0" command. That somehow broke between 2.6.12-rc6-git2
> and 2.6.13-rc1. The machines makes the sound like shutdown but it
> immediately turns the power on again. I used acpi and the kernel
> configs should be almost identical in all cases, as I just recopy
> previously used .config and run "make oldconfig".
> 
>   Any clues? I still happens even with 2.6.13-rc3-git2.
> Please Cc: me in replies.
> Martin


I have the same problem.
System: Debian 3.1
Hardware:
motherboard P4P800 (with bios 1019)

It may be problem around acpi in asus board. But 2.6.12.1 works good.

Regards,
Michal Piotrowski