[patch 17/29] USB: ftdi_sio: new microHAM and Evolution Robotics devices

[Greg KH <gregkh@suse.de>]

[-- Attachment #1: usb-ftdi_sio-new-devices.patch --]
[-- Type: text/plain, Size: 1977 bytes --]

From: Ian Abbott <abbotti@mev.co.uk>

The attached patch adds the following new devices to the ftdi_sio driver:

* microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL).
* Evolution Robotics ER1 Control Module submitted by Shawn M.  Lavelle.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/serial/ftdi_sio.c |    3 +++
 drivers/usb/serial/ftdi_sio.h |   14 ++++++++++++++
 2 files changed, 17 insertions(+)

--- gregkh-2.6.orig/drivers/usb/serial/ftdi_sio.c	2005-07-29 11:29:48.000000000 -0700
+++ gregkh-2.6/drivers/usb/serial/ftdi_sio.c	2005-07-29 11:36:25.000000000 -0700
@@ -429,6 +429,9 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
 	{ }						/* Terminating entry */
 };
 
--- gregkh-2.6.orig/drivers/usb/serial/ftdi_sio.h	2005-07-29 11:29:48.000000000 -0700
+++ gregkh-2.6/drivers/usb/serial/ftdi_sio.h	2005-07-29 11:36:25.000000000 -0700
@@ -265,10 +265,24 @@
 #define MOBILITY_USB_SERIAL_PID		0x0202	/* EasiDock USB 200 serial */
 
 /*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ */
+#define FTDI_MHAM_Y6_PID 0xEEEA		/* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB		/* USB-Y8 interface */
+
+/*
  * Active Robots product ids.
  */
 #define FTDI_ACTIVE_ROBOTS_PID	0xE548	/* USB comms board */
 
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID		0xDEEE	/* Vendor ID */
+#define EVOLUTION_ER1_PID	0x0300	/* ER1 Control Module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */

--