From: Bjorn Helgaas <bjorn.helgaas@hp.com>
To: Andrew Morton <akpm@osdl.org>
Cc: Khalid Aziz <khalid_aziz@hp.com>,
linux-kernel@vger.kernel.org, linux-ia64@vger.kernel.org,
linux-acpi@intel.com
Subject: Re: 2.6.13-rc3-mm3
Date: Mon, 1 Aug 2005 09:36:47 -0600 [thread overview]
Message-ID: <200508010936.47741.bjorn.helgaas@hp.com> (raw)
In-Reply-To: <20050729161751.34705ac6.akpm@osdl.org>
On Friday 29 July 2005 5:17 pm, Andrew Morton wrote:
> Khalid Aziz <khalid_aziz@hp.com> wrote:
> >
> > Serial console is broken on ia64 on an HP rx2600 machine on
> > 2.6.13-rc3-mm3. When kernel is booted up with "console=ttyS,...", no
> > output ever appears on the console and system is hung. So I booted the
> > kernel with "console=uart,mmio,0xff5e0000" to enable early console and
> > here is how far the kernel got before hanging:
> > Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing enabled
> > ...
> > No ttyS device at MMIO 0xff5e0000 for console
> >
> > Serial driver failed to find any serial ports. I am using defconfig. A
> > 2.6.13-rc3 kernel (no mm3 patch) compiled with defconfig boots up fine
> > and finds all serial ports.
Your rc3-mm3 boot is also missing this:
IOC: zx1 2.2 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
So something's busted with ACPI. Both the IOC and the rx2600 serial
ports should be discovered via ACPI.
next prev parent reply other threads:[~2005-08-01 15:41 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-28 9:58 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 10:44 ` [-mm patch] fix MTRR compilation with SMP=n Adrian Bunk
2005-07-28 17:11 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:52 ` 2.6.13-rc3-mm3 Russell King
2005-07-28 20:06 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-07-28 19:11 ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 19:16 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 21:40 ` 2.6.13-rc3-mm3 Rafael J. Wysocki
2005-07-28 23:31 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 7:06 ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29 9:27 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 12:01 ` 2.6.13-rc3-mm3 Matthias Urlichs
2005-07-29 14:12 ` Regression hunting with git (was: Re: 2.6.13-rc3-mm3) Matthias Urlichs
2005-07-28 20:34 ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 22:09 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:15 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-28 20:56 ` 2.6.13-rc3-mm3 Nick Sillik
2005-07-28 23:16 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 20:29 ` 2.6.13-rc3-mm3 Adrian Bunk
2005-07-28 23:29 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-28 22:02 ` 2.6.13-rc3-mm3 Dirk
2005-07-28 23:46 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:48 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29 19:33 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30 0:00 ` 2.6.13-rc3-mm3 Michael Thonke
2005-07-29 5:58 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:08 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-29 15:21 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 16:15 ` 2.6.13-rc3-mm3 Eric W. Biederman
2005-07-29 6:01 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:10 ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-03 1:17 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-03 4:21 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-08-07 23:23 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 6:02 ` 2.6.13-rc3-mm3 Martin J. Bligh
2005-07-29 23:05 ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-29 23:17 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-30 15:33 ` 2.6.13-rc3-mm3 Khalid Aziz
2005-07-30 18:02 ` 2.6.13-rc3-mm3 Andrew Morton
2005-08-01 15:36 ` Bjorn Helgaas [this message]
2005-07-30 10:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-07-30 17:05 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 9:04 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 9:16 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 11:12 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 12:46 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 17:35 ` 2.6.13-rc3-mm3 Andrew Morton
2005-07-31 18:21 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:25 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 18:41 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-07-31 18:59 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-07-31 21:35 ` 2.6.13-rc3-mm3 Stelian Pop
[not found] ` <Pine.LNX.4.58.0507311125360.29650@g5.osdl.org>
[not found] ` <1122846072.17880.43.camel@deep-space-9.dsnet>
[not found] ` <Pine.LNX.4.58.0507311557020.14342@g5.osdl.org>
2005-08-01 14:37 ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02 9:49 ` 2.6.13-rc3-mm3 Stelian Pop
2005-08-02 10:32 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 11:40 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 14:04 ` 2.6.13-rc3-mm3 Manuel Lauss
2005-08-02 15:48 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 16:50 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 17:11 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 21:13 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:21 ` 2.6.13-rc3-mm3 Greg KH
2005-08-02 21:47 ` 2.6.13-rc3-mm3 Ivan Kokshaysky
2005-08-02 21:57 ` 2.6.13-rc3-mm3 Linus Torvalds
2005-08-02 22:59 ` [patch 1/2] increase PCIBIOS_MIN_IO on x86 Ivan Kokshaysky
2005-08-02 23:09 ` [patch 2/2] ACPI: " Ivan Kokshaysky
2005-08-01 1:43 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 16:10 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 20:02 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 20:36 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:07 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:16 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 21:40 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 21:52 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 22:02 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 22:19 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:01 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-01 23:16 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-01 23:32 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04 0:19 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 11:27 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-04 14:04 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-04 14:37 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-05 15:17 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-07 13:44 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 16:48 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 17:10 ` 2.6.13-rc3-mm3 Russell King
2005-08-08 17:15 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-08-08 20:40 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-08 22:12 ` 2.6.13-rc3-mm3 Richard Purdie
2005-08-09 0:57 ` 2.6.13-rc3-mm3 Christoph Lameter
2005-09-14 14:32 ` 2.6.13-mm3 and 2.6.14-rc1 both broken (SCSI?) Martin J. Bligh
2005-09-14 14:09 ` Anton Blanchard
-- strict thread matches above, loose matches on Subject: below --
2005-07-28 10:40 2.6.13-rc3-mm3 Sebastian Kaergel
2005-07-28 9:54 ` 2.6.13-rc3-mm3 Alexandre Buisse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200508010936.47741.bjorn.helgaas@hp.com \
--to=bjorn.helgaas@hp.com \
--cc=akpm@osdl.org \
--cc=khalid_aziz@hp.com \
--cc=linux-acpi@intel.com \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox