From: Con Kolivas <kernel@kolivas.org>
To: Vojtech Pavlik <vojtech@suse.cz>
Cc: Jan De Luyck <lkml@kcore.org>,
linux-kernel@vger.kernel.org, ck@vds.kolivas.org,
tony@atomide.com, tuukka.tikkanen@elektrobit.com
Subject: Re: [PATCH] i386 No-Idle-Hz aka Dynamic-Ticks 3
Date: Fri, 5 Aug 2005 15:12:18 +1000 [thread overview]
Message-ID: <200508051512.18500.kernel@kolivas.org> (raw)
In-Reply-To: <20050804150341.GA10282@ucw.cz>
[-- Attachment #1: Type: text/plain, Size: 1875 bytes --]
On Fri, 5 Aug 2005 01:03 am, Vojtech Pavlik wrote:
> On Wed, Aug 03, 2005 at 04:23:59PM +0200, Jan De Luyck wrote:
> > On Wednesday 03 August 2005 14:14, Con Kolivas wrote:
> > > On Wed, 3 Aug 2005 21:54, Jan De Luyck wrote:
> > > > On Wednesday 03 August 2005 07:59, Con Kolivas wrote:
> > > > > This is the dynamic ticks patch for i386 as written by Tony Lindgen
> > > > > <tony@atomide.com> and Tuukka Tikkanen
> > > > > <tuukka.tikkanen@elektrobit.com>. Patch for 2.6.13-rc5
> > > >
> > > > Compiles and runs ok here.
> > > >
> > > > Is there actually any timer frequency that's advisable to set as
> > > > maximum? (in the kernel config)
> > >
> > > I'd recommend 1000.
> >
> > Thanks. Currently the system - under X, KDE, no artsd, bottoms at around
> > 300HZ. In total single mode with every module unloaded that I can unload
> > it stops around 22HZ.
> >
> > I guess I'll have to go hunting whatever thing is causing the pollings.
> > no timertop yet, I guess? :P
>
> i8042 runs a steady periodic 20Hz timer. You can make it slower to get
> even the total low lower, and it will not affect performance under
> normal (sane hardware) circumstances.
Indeed and this patch (safely tried at home but serves no useful purpose
really) confirms a reasonable drop without problems. After this, only fbcon
polls at a similar rate (HZ/5).
Of interest to those using an ondemand scaling governor, now that we have
timertop, I have found that the default ondemand settings lead to
delayed_work_timer_fn at about 140Hz and this can be dropped substantially by
slowing the rate of polling (and subsequently slowing the speed with which
the ondemand governor responds) down to <25 by
echo 100000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
(the default is 10000 and the value is confusing as the rate goes down as you
increase this value).
Cheers,
Con
[-- Attachment #2: i8042_slowpoll.patch --]
[-- Type: text/x-diff, Size: 442 bytes --]
Index: linux-2.6.13-rc5-ck2/drivers/input/serio/i8042.h
===================================================================
--- linux-2.6.13-rc5-ck2.orig/drivers/input/serio/i8042.h 2005-07-06 16:56:52.000000000 +1000
+++ linux-2.6.13-rc5-ck2/drivers/input/serio/i8042.h 2005-08-05 15:03:49.000000000 +1000
@@ -44,7 +44,7 @@
* polling.
*/
-#define I8042_POLL_PERIOD HZ/20
+#define I8042_POLL_PERIOD HZ/5
/*
* Status register bits.
next prev parent reply other threads:[~2005-08-05 5:16 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-03 5:59 [PATCH] i386 No-Idle-Hz aka Dynamic-Ticks 3 Con Kolivas
2005-08-03 11:54 ` Jan De Luyck
2005-08-03 12:14 ` Con Kolivas
2005-08-03 14:23 ` Jan De Luyck
2005-08-04 15:03 ` Vojtech Pavlik
2005-08-05 5:12 ` Con Kolivas [this message]
2005-08-03 19:20 ` Jim MacBaine
2005-08-03 21:16 ` Con Kolivas
2005-08-03 22:22 ` Jim MacBaine
2005-08-03 22:52 ` Con Kolivas
2005-08-04 5:34 ` Jim MacBaine
2005-08-04 6:59 ` Jim MacBaine
2005-08-04 7:04 ` Con Kolivas
2005-08-04 7:12 ` Con Kolivas
2005-08-04 7:29 ` Tony Lindgren
2005-08-10 20:04 ` Bill Davidsen
2005-08-14 19:47 ` Pavel Machek
2005-08-15 1:43 ` Zwane Mwaikambo
2005-08-15 12:52 ` Con Kolivas
2005-08-15 15:39 ` Zwane Mwaikambo
2005-08-03 19:54 ` Jeffrey Hundstad
2005-08-03 20:07 ` Valdis.Kletnieks
2005-08-03 21:13 ` Con Kolivas
2005-08-03 23:22 ` Christian Leber
2005-08-04 16:25 ` Marc Ballarin
2005-08-04 5:09 ` Jan De Luyck
2005-08-04 5:07 ` Con Kolivas
2005-08-04 5:34 ` Jan De Luyck
2005-08-04 21:15 ` [PATCH] Timer Top was: " Daniel Petrini
2005-08-05 4:05 ` [PATCH] Timer Top tweaks Con Kolivas
2005-08-05 6:46 ` [ck] [PATCH] Timer Top was: i386 No-Idle-Hz aka Dynamic-Ticks 3 Jens Axboe
2005-08-05 12:39 ` Daniel Petrini
2005-08-05 13:55 ` Daniel Petrini
2005-08-04 21:44 ` [PATCH] " Adrian Bunk
2005-08-04 22:12 ` Marc Ballarin
2005-08-05 0:31 ` Con Kolivas
2005-08-05 1:30 ` Paul
2005-08-05 3:25 ` Con Kolivas
2005-08-05 12:37 ` Srivatsa Vaddagiri
2005-08-05 13:08 ` Con Kolivas
2005-08-05 16:39 ` [PATCH] i386 No-Idle-Hz aka Dynamic-Ticks 4 Con Kolivas
2005-08-06 17:47 ` Adrian Bunk
2005-08-07 5:12 ` [PATCH] i386 No-Idle-Hz aka Dynamic-Ticks 5 Con Kolivas
2005-08-07 16:58 ` Srivatsa Vaddagiri
2005-08-07 23:51 ` Con Kolivas
2005-08-08 1:20 ` Kyle Moffett
2005-08-08 1:30 ` Con Kolivas
2005-08-08 1:45 ` [ck] " Gabriel Devenyi
2005-08-08 2:44 ` Srivatsa Vaddagiri
2005-08-08 7:05 ` Nigel Cunningham
2005-08-08 7:38 ` Tony Lindgren
2005-08-08 15:06 ` Srivatsa Vaddagiri
2005-08-09 19:36 ` George Anzinger
2005-08-10 14:05 ` Srivatsa Vaddagiri
2005-08-10 22:37 ` George Anzinger
2005-08-11 21:33 ` Bill Davidsen
2005-08-12 15:13 ` George Anzinger
2005-08-08 15:08 ` Folkert van Heusden
2005-08-08 15:16 ` Daniel Petrini
2005-08-08 7:26 ` [PATCH] i386 No-Idle-Hz aka Dynamic-Ticks 3 Tony Lindgren
2005-08-08 14:54 ` Srivatsa Vaddagiri
2005-08-08 15:20 ` Tony Lindgren
2005-08-09 14:22 ` Zwane Mwaikambo
2005-08-10 7:46 ` Tony Lindgren
2005-08-09 20:05 ` George Anzinger
2005-08-09 20:22 ` Daniel Petrini
2005-08-10 8:02 ` Tony Lindgren
2005-08-10 22:40 ` George Anzinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200508051512.18500.kernel@kolivas.org \
--to=kernel@kolivas.org \
--cc=ck@vds.kolivas.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@kcore.org \
--cc=tony@atomide.com \
--cc=tuukka.tikkanen@elektrobit.com \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox