Logitech Quickcam Express USB Address Aquisition Issues

Logitech Quickcam Express USB Address Aquisition Issues

[Chris White]

[-- Attachment #1: Type: text/plain, Size: 1576 bytes --]

[Pre Note: please CC me all responses, thanks]

Currently, I have a Logitech Quickcam Express webcamera.  Unfortunately, it seems to have issues getting assigned an address.  I quote the following from dmesg:

usb 1-1.1: new full speed USB device using ehci_hcd and address 11
usb 1-1.1: device descriptor read/64, error -32
usb 1-1.1: device descriptor read/64, error -32
usb 1-1.1: new full speed USB device using ehci_hcd and address 12
usb 1-1.1: device descriptor read/64, error -32
usb 1-1.1: device descriptor read/64, error -32
usb 1-1.1: new full speed USB device using ehci_hcd and address 13
usb 1-1.1: device not accepting address 13, error -32
usb 1-1.1: new full speed USB device using ehci_hcd and address 14
usb 1-1.1: device not accepting address 14, error -32

As far as the host goes, I have the following USB hosts:

0000:00:11.0 USB Controller: NEC Corporation USB (rev 43)
0000:00:11.1 USB Controller: NEC Corporation USB (rev 43)
0000:00:11.2 USB Controller: NEC Corporation USB 2.0 (rev 04)

The first is my builtin Intel USB controller, the second is one belkin USB 1.0 card, and another 2.0 card.  I've tried it in all three just to verify one of my hosts wasn't broken.  Considering my printer works with it, as well as my scanner, I'm sort of thinking that's not an issue.

I searched up google a bit and recieved some warnings about acpi causing problems, so I disabled that, but was still unsucessful in getting that to work.  Please let me know if any other information is required.  Thanks ahead of time.

Chris White

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Andrew Morton]

Chris White <chriswhite@gentoo.org> wrote:
>
> [Pre Note: please CC me all responses, thanks]
> 
> Currently, I have a Logitech Quickcam Express webcamera.  Unfortunately, it
> seems to have issues getting assigned an address.  I quote the following
> from dmesg:
> 
> usb 1-1.1: new full speed USB device using ehci_hcd and address 11
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: new full speed USB device using ehci_hcd and address 12
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: new full speed USB device using ehci_hcd and address 13
> usb 1-1.1: device not accepting address 13, error -32
> usb 1-1.1: new full speed USB device using ehci_hcd and address 14
> usb 1-1.1: device not accepting address 14, error -32
> 
> As far as the host goes, I have the following USB hosts:
> 
> 0000:00:11.0 USB Controller: NEC Corporation USB (rev 43)
> 0000:00:11.1 USB Controller: NEC Corporation USB (rev 43)
> 0000:00:11.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
> 
> The first is my builtin Intel USB controller, the second is one belkin
> USB 1.0 card, and another 2.0 card.  I've tried it in all three just to
> verify one of my hosts wasn't broken.  Considering my printer works with
> it, as well as my scanner, I'm sort of thinking that's not an issue.
> 
> I searched up google a bit and recieved some warnings about acpi causing
> problems, so I disabled that, but was still unsucessful in getting that to
> work.  Please let me know if any other information is required.  Thanks
> ahead of time.
> 

(Added linux-usb-devel)

Which kernel version?

Did it work OK under a previous kernel version?  If so, which?

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Chris White]

[-- Attachment #1: Type: text/plain, Size: 334 bytes --]

> Which kernel version?

Yes, I was just about to slap myself for fogetting that, it's under greg-kh's 2.6.12.13 git repository sources.
 
> Did it work OK under a previous kernel version?  If so, which?

I haven't attempted that, but I'll probably give a 2.6.9/2.4 series kernel a shot later on tommorow night.

Chris White

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Pete Zaitcev]

On Sun, 7 Aug 2005 16:11:12 +0900, Chris White <chriswhite@gentoo.org> wrote:

> > Did it work OK under a previous kernel version?  If so, which?
> 
> I haven't attempted that, but I'll probably give a 2.6.9/2.4 series
> kernel a shot later on tommorow night.

Does that thing work with Windows?

I strongly suspect that it's simply broken at this point.

-- Pete

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Chris White]

[-- Attachment #1: Type: text/plain, Size: 459 bytes --]

> Does that thing work with Windows?
> 
> I strongly suspect that it's simply broken at this point.
> 
> -- Pete
> 

And that is the final answer for $14,000.  Looks like I got Yet Another 
Large Paperweight(tm) to deal with.  Yup, this thing is broken.  I tried
it on my dad's machine today, and Windows chucked the thing out as invalid
format right away.  Oh well, maybe I should enroll in an electronics class
and fix it myself.

Chris White

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Ondrej Zary]

Chris White wrote:
  > As far as the host goes, I have the following USB hosts:
> 
> 0000:00:11.0 USB Controller: NEC Corporation USB (rev 43)
> 0000:00:11.1 USB Controller: NEC Corporation USB (rev 43)
> 0000:00:11.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
> 
> The first is my builtin Intel USB controller, the second is one belkin USB 1.0 card, and another 2.0 card.  I've tried it in all three just to verify one of my hosts wasn't broken.  Considering my printer works with it, as well as my scanner, I'm sort of thinking that's not an issue.
It looks like one add-on USB 2.0 card with NEC chip which is backward 
compatible with USB 1.0. No Intel here.

-- 
Ondrej Zary

Re: Logitech Quickcam Express USB Address Aquisition Issues

[christos gentsis]

On Sun, 2005-08-07 at 16:02 +0900, Chris White wrote:
> [Pre Note: please CC me all responses, thanks]
> 
> Currently, I have a Logitech Quickcam Express webcamera.  Unfortunately, it seems to have issues getting assigned an address.  I quote the following from dmesg:
> 
> usb 1-1.1: new full speed USB device using ehci_hcd and address 11
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: new full speed USB device using ehci_hcd and address 12
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: device descriptor read/64, error -32
> usb 1-1.1: new full speed USB device using ehci_hcd and address 13
> usb 1-1.1: device not accepting address 13, error -32
> usb 1-1.1: new full speed USB device using ehci_hcd and address 14
> usb 1-1.1: device not accepting address 14, error -32
> 
> As far as the host goes, I have the following USB hosts:
> 
> 0000:00:11.0 USB Controller: NEC Corporation USB (rev 43)
> 0000:00:11.1 USB Controller: NEC Corporation USB (rev 43)
> 0000:00:11.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
> 
> The first is my builtin Intel USB controller, the second is one belkin USB 1.0 card, and another 2.0 card.  I've tried it in all three just to verify one of my hosts wasn't broken.  Considering my printer works with it, as well as my scanner, I'm sort of thinking that's not an issue.
> 
> I searched up google a bit and recieved some warnings about acpi causing problems, so I disabled that, but was still unsucessful in getting that to work.  Please let me know if any other information is required.  Thanks ahead of time.
> 
> Chris White

does the drivers for the Phillips web cams come back to the kernel?
because i thought that it was taken out... 

http://www.smcc.demon.nl/webcam/

check this site and see if your cam was one of the cams that supported
from the driver that discontinue... so if is supported by this driver,
download and install it... it works i try it with my cam ;)

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Alistair John Strachan]

On Sunday 07 Aug 2005 12:36, christos gentsis wrote:
[snip]
> >
> > I searched up google a bit and recieved some warnings about acpi causing
> > problems, so I disabled that, but was still unsucessful in getting that
> > to work.  Please let me know if any other information is required. 
> > Thanks ahead of time.
> >
> > Chris White
>
> does the drivers for the Phillips web cams come back to the kernel?
> because i thought that it was taken out...
>
> http://www.smcc.demon.nl/webcam/
>
> check this site and see if your cam was one of the cams that supported
> from the driver that discontinue... so if is supported by this driver,
> download and install it... it works i try it with my cam ;)
>

The in-kernel pwc driver doesn't work for me either. I highly recommend you 
try the above if this turns out to not be a hardware fault.

-- 
Cheers,
Alistair.

'No sense being pessimistic, it probably wouldn't work anyway.'
Third year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Alistair John Strachan]

On Sunday 07 Aug 2005 19:54, Alistair John Strachan wrote:
> On Sunday 07 Aug 2005 12:36, christos gentsis wrote:
> [snip]
>
> > > I searched up google a bit and recieved some warnings about acpi
> > > causing problems, so I disabled that, but was still unsucessful in
> > > getting that to work.  Please let me know if any other information is
> > > required. Thanks ahead of time.
> > >
> > > Chris White
> >
> > does the drivers for the Phillips web cams come back to the kernel?
> > because i thought that it was taken out...
> >
> > http://www.smcc.demon.nl/webcam/
> >
> > check this site and see if your cam was one of the cams that supported
> > from the driver that discontinue... so if is supported by this driver,
> > download and install it... it works i try it with my cam ;)
>
> The in-kernel pwc driver doesn't work for me either. I highly recommend you
> try the above if this turns out to not be a hardware fault.

Sorry, I didn't even check the link. Try the driver from:

http://www.saillard.org/linux/pwc/

Which seems to work better.

-- 
Cheers,
Alistair.

'No sense being pessimistic, it probably wouldn't work anyway.'
Third year Computer Science undergraduate.
1F2 55 South Clerk Street, Edinburgh, UK.

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Chris White]

[-- Attachment #1: Type: text/plain, Size: 274 bytes --]

> Sorry, I didn't even check the link. Try the driver from:
> 
> http://www.saillard.org/linux/pwc/
> 
> Which seems to work better.
> 
> -- 
> Cheers,
> Alistair.


Err, mine's a logitech camera, why is everyone recommending philips
drivers :P?

Chris White

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: Logitech Quickcam Express USB Address Aquisition Issues

[Hugo Mills]

[-- Attachment #1: Type: text/plain, Size: 601 bytes --]

On Mon, Aug 08, 2005 at 11:38:01AM +0900, Chris White wrote:
> > Sorry, I didn't even check the link. Try the driver from:
> > 
> > http://www.saillard.org/linux/pwc/
> > 
> > Which seems to work better.
> 
> Err, mine's a logitech camera, why is everyone recommending philips
> drivers :P?

   Because many of the Logitech cameras are based on the Philips
chipset.

   Hugo.

-- 
=== Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk ===
  PGP key: 1C335860 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
           --- All hope abandon,  Ye who press Enter here. ---           

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: Logitech Quickcam Express USB Address Aquisition Issues

[christos gentsis]

On Mon, 2005-08-08 at 11:38 +0900, Chris White wrote:
> Err, mine's a logitech camera, why is everyone recommending philips
> drivers :P?
> 
> Chris White

what happens with the most of the computer peripherals the company that
sell it is different with the company that produce it... in this case
philips sell the ship for the cameras to other companies and logitech
use that chip. in the website say which cameras are based to the philips
chip