* [2.6 patch] arch/cris/Kconfig.debug: use lib/Kconfig.debug
@ 2005-08-07 22:00 Adrian Bunk
2005-08-08 12:36 ` starvik
0 siblings, 1 reply; 3+ messages in thread
From: Adrian Bunk @ 2005-08-07 22:00 UTC (permalink / raw)
To: Andrew Morton; +Cc: starvik, dev-etrax, linux-kernel
This patch converts arch/cris/Kconfig.debug to using lib/Kconfig.debug.
This should fix a compile error in 2.6.13-rc4 caused by a missing
CONFIG_LOG_BUF_SHIFT definition.
While I was editing this file, I also converted some spaces to tabs.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was already sent on:
- 31 Jul 2005
arch/cris/Kconfig.debug | 31 ++++++++++---------------------
1 files changed, 10 insertions(+), 21 deletions(-)
--- linux-2.6.13-rc4-mm1/arch/cris/Kconfig.debug.old 2005-07-31 18:29:15.000000000 +0200
+++ linux-2.6.13-rc4-mm1/arch/cris/Kconfig.debug 2005-07-31 18:32:15.000000000 +0200
@@ -5,10 +5,13 @@
bool "Kernel profiling support"
config SYSTEM_PROFILER
- bool "System profiling support"
+ bool "System profiling support"
+
+source "lib/Kconfig.debug"
config ETRAX_KGDB
bool "Use kernel GDB debugger"
+ depends on DEBUG_KERNEL
---help---
The CRIS version of gdb can be used to remotely debug a running
Linux kernel via the serial debug port. Provided you have gdb-cris
@@ -22,25 +25,11 @@
this option is turned on!
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
-
config DEBUG_NMI_OOPS
- bool "NMI causes oops printout"
- help
- If the system locks up without any debug information you can say Y
- here to make it possible to dump an OOPS with an external NMI.
+ bool "NMI causes oops printout"
+ depends on DEBUG_KERNEL
+ help
+ If the system locks up without any debug information you can say Y
+ here to make it possible to dump an OOPS with an external NMI.
+
endmenu
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [2.6 patch] arch/cris/Kconfig.debug: use lib/Kconfig.debug
2005-08-07 22:00 [2.6 patch] arch/cris/Kconfig.debug: use lib/Kconfig.debug Adrian Bunk
@ 2005-08-08 12:36 ` starvik
0 siblings, 0 replies; 3+ messages in thread
From: starvik @ 2005-08-08 12:36 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, dev-etrax, linux-kernel
Acked-by: Mikael Starvik <starvik@axis.com>
> This patch converts arch/cris/Kconfig.debug to using lib/Kconfig.debug.
>
> This should fix a compile error in 2.6.13-rc4 caused by a missing
> CONFIG_LOG_BUF_SHIFT definition.
>
> While I was editing this file, I also converted some spaces to tabs.
>
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
>
> ---
>
> This patch was already sent on:
> - 31 Jul 2005
>
> arch/cris/Kconfig.debug | 31 ++++++++++---------------------
> 1 files changed, 10 insertions(+), 21 deletions(-)
>
> --- linux-2.6.13-rc4-mm1/arch/cris/Kconfig.debug.old 2005-07-31
> 18:29:15.000000000 +0200
> +++ linux-2.6.13-rc4-mm1/arch/cris/Kconfig.debug 2005-07-31
> 18:32:15.000000000 +0200
> @@ -5,10 +5,13 @@
> bool "Kernel profiling support"
>
> config SYSTEM_PROFILER
> - bool "System profiling support"
> + bool "System profiling support"
> +
> +source "lib/Kconfig.debug"
>
> config ETRAX_KGDB
> bool "Use kernel GDB debugger"
> + depends on DEBUG_KERNEL
> ---help---
> The CRIS version of gdb can be used to remotely debug a running
> Linux kernel via the serial debug port. Provided you have gdb-cris
> @@ -22,25 +25,11 @@
> this option is turned on!
>
>
> -config DEBUG_INFO
> - bool "Compile the kernel with debug info"
> - help
> - If you say Y here the resulting kernel image will include
> - debugging info resulting in a larger kernel image.
> - Say Y here only if you plan to use gdb to debug the kernel.
> - If you don't debug the kernel, you can say N.
> -
> -config FRAME_POINTER
> - bool "Compile the kernel with frame pointers"
> - help
> - If you say Y here the resulting kernel image will be slightly
> larger
> - and slower, but it will give very useful debugging information.
> - If you don't debug the kernel, you can say N, but we may not be
> able
> - to solve problems without frame pointers.
> -
> config DEBUG_NMI_OOPS
> - bool "NMI causes oops printout"
> - help
> - If the system locks up without any debug information you can say Y
> - here to make it possible to dump an OOPS with an external NMI.
> + bool "NMI causes oops printout"
> + depends on DEBUG_KERNEL
> + help
> + If the system locks up without any debug information you can say Y
> + here to make it possible to dump an OOPS with an external NMI.
> +
> endmenu
>
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
^ permalink raw reply [flat|nested] 3+ messages in thread
* [2.6 patch] arch/cris/Kconfig.debug: use lib/Kconfig.debug
@ 2005-07-31 16:39 Adrian Bunk
0 siblings, 0 replies; 3+ messages in thread
From: Adrian Bunk @ 2005-07-31 16:39 UTC (permalink / raw)
To: starvik; +Cc: dev-etrax, linux-kernel
This patch converts arch/cris/Kconfig.debug to using lib/Kconfig.debug.
This should fix a compile error in 2.6.13-rc4 caused by a missing
CONFIG_LOG_BUF_SHIFT definition.
While I was editing this file, I also converted some spaces to tabs.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
arch/cris/Kconfig.debug | 31 ++++++++++---------------------
1 files changed, 10 insertions(+), 21 deletions(-)
--- linux-2.6.13-rc4-mm1/arch/cris/Kconfig.debug.old 2005-07-31 18:29:15.000000000 +0200
+++ linux-2.6.13-rc4-mm1/arch/cris/Kconfig.debug 2005-07-31 18:32:15.000000000 +0200
@@ -5,10 +5,13 @@
bool "Kernel profiling support"
config SYSTEM_PROFILER
- bool "System profiling support"
+ bool "System profiling support"
+
+source "lib/Kconfig.debug"
config ETRAX_KGDB
bool "Use kernel GDB debugger"
+ depends on DEBUG_KERNEL
---help---
The CRIS version of gdb can be used to remotely debug a running
Linux kernel via the serial debug port. Provided you have gdb-cris
@@ -22,25 +25,11 @@
this option is turned on!
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
-
config DEBUG_NMI_OOPS
- bool "NMI causes oops printout"
- help
- If the system locks up without any debug information you can say Y
- here to make it possible to dump an OOPS with an external NMI.
+ bool "NMI causes oops printout"
+ depends on DEBUG_KERNEL
+ help
+ If the system locks up without any debug information you can say Y
+ here to make it possible to dump an OOPS with an external NMI.
+
endmenu
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-08-08 12:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-08-07 22:00 [2.6 patch] arch/cris/Kconfig.debug: use lib/Kconfig.debug Adrian Bunk
2005-08-08 12:36 ` starvik
-- strict thread matches above, loose matches on Subject: below --
2005-07-31 16:39 Adrian Bunk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox