From: Jesper Juhl <jesper.juhl@gmail.com>
To: Linus Torvalds <torvalds@osdl.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux-2.6.13-rc6: aic7xxx testers please..
Date: Mon, 8 Aug 2005 19:54:52 +0200 [thread overview]
Message-ID: <200508081954.52638.jesper.juhl@gmail.com> (raw)
In-Reply-To: <Pine.LNX.4.58.0508071136020.3258@g5.osdl.org>
On Sunday 07 August 2005 20:47, Linus Torvalds wrote:
>
> James and gang found the aic7xxx slowdown that happened after 2.6.12, and
> we'd like to get particular testing that it's fixed, so if you have a
> relevant machine, please do test this.
>
I'm using the aic7xxx driver, and although I haven't had any trouble with
previous kernels and this driver I thought I'd report anyway that everything
seems to be working ok with -rc6. At least this means you haven't broken a
previously working setup :-)
Details about my hardware below :
$ uname -a
Linux dragon 2.6.13-rc6 #1 Mon Aug 8 18:07:08 CEST 2005 i686 unknown unknown GNU/Linux
$ /sbin/lspci -vvv
<...>
00:0b.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160N Ultra160 SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
BIST result: 00
Region 0: I/O ports at 9800 [disabled] [size=256]
Region 1: Memory at e3000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 20000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
<...>
$ dmesg
<...>
[ 27.874038] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
[ 27.874041] <Adaptec 29160N Ultra160 SCSI adapter>
[ 27.874043] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 27.874046]
[ 27.884187] kobject host0: registering. parent: 0000:00:0b.0, set: devices
[ 27.884206] kobject host0: registering. parent: scsi_host, set: class_obj
[ 27.884226] kobject host0: registering. parent: spi_host, set: class_obj
[ 27.884240] kobject target0:0:0: registering. parent: host0, set: devices
[ 27.884248] kobject target0:0:0: registering. parent: spi_transport, set: class_obj
[ 43.122408] kobject <NULL>: cleaning up
[ 43.122436] kobject target0:0:0: cleaning up
[ 43.122439] kobject target0:0:0: cleaning up
[ 43.122445] kobject target0:0:1: registering. parent: host0, set: devices
[ 43.122455] kobject target0:0:1: registering. parent: spi_transport, set: class_obj
[ 43.378585] kobject <NULL>: cleaning up
[ 43.378600] kobject target0:0:1: cleaning up
[ 43.378603] kobject target0:0:1: cleaning up
[ 43.378609] kobject target0:0:2: registering. parent: host0, set: devices
[ 43.378617] kobject target0:0:2: registering. parent: spi_transport, set: class_obj
[ 43.634760] kobject <NULL>: cleaning up
[ 43.634773] kobject target0:0:2: cleaning up
[ 43.634777] kobject target0:0:2: cleaning up
[ 43.634782] kobject target0:0:3: registering. parent: host0, set: devices
[ 43.634791] kobject target0:0:3: registering. parent: spi_transport, set: class_obj
[ 43.890919] kobject <NULL>: cleaning up
[ 43.890932] kobject target0:0:3: cleaning up
[ 43.890936] kobject target0:0:3: cleaning up
[ 43.890941] kobject target0:0:4: registering. parent: host0, set: devices
[ 43.890949] kobject target0:0:4: registering. parent: spi_transport, set: class_obj
[ 43.896324] Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
[ 43.899023] Type: CD-ROM ANSI SCSI revision: 02
[ 43.901656] target0:0:4: asynchronous.
[ 43.904268] target0:0:4: Beginning Domain Validation
[ 43.909476] target0:0:4: Domain Validation skipping write tests
[ 43.912470] target0:0:4: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
[ 43.917610] target0:0:4: Ending Domain Validation
[ 43.920192] kobject 0:0:4:0: registering. parent: target0:0:4, set: devices
[ 43.920207] kobject 0:0:4:0: registering. parent: scsi_device, set: class_obj
[ 43.920231] kobject target0:0:5: registering. parent: host0, set: devices
[ 43.920248] kobject target0:0:5: registering. parent: spi_transport, set: class_obj
[ 43.925135] Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
[ 43.927873] Type: CD-ROM ANSI SCSI revision: 02
[ 43.930543] target0:0:5: asynchronous.
[ 43.933130] target0:0:5: Beginning Domain Validation
[ 43.937224] target0:0:5: Domain Validation skipping write tests
[ 43.940045] target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
[ 43.944099] target0:0:5: Ending Domain Validation
[ 43.946629] kobject 0:0:5:0: registering. parent: target0:0:5, set: devices
[ 43.946640] kobject 0:0:5:0: registering. parent: scsi_device, set: class_obj
[ 43.946656] kobject target0:0:6: registering. parent: host0, set: devices
[ 43.946664] kobject target0:0:6: registering. parent: spi_transport, set: class_obj
[ 43.947795] Vendor: IBM Model: DDYS-T36950N Rev: S96H
[ 43.950487] Type: Direct-Access ANSI SCSI revision: 03
[ 43.953091] target0:0:6: asynchronous.
[ 43.955613] scsi0:A:6:0: Tagged Queuing enabled. Depth 250
[ 43.958183] target0:0:6: Beginning Domain Validation
[ 43.963544] target0:0:6: wide asynchronous.
[ 43.970778] target0:0:6: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
[ 43.982801] target0:0:6: Ending Domain Validation
[ 43.985348] kobject 0:0:6:0: registering. parent: target0:0:6, set: devices
[ 43.985360] kobject 0:0:6:0: registering. parent: scsi_device, set: class_obj
[ 43.985898] kobject target0:0:8: registering. parent: host0, set: devices
[ 43.985917] kobject target0:0:8: registering. parent: spi_transport, set: class_obj
[ 44.242053] kobject <NULL>: cleaning up
[ 44.242068] kobject target0:0:8: cleaning up
[ 44.242071] kobject target0:0:8: cleaning up
[ 44.242077] kobject target0:0:9: registering. parent: host0, set: devices
[ 44.242085] kobject target0:0:9: registering. parent: spi_transport, set: class_obj
[ 44.498214] kobject <NULL>: cleaning up
[ 44.498228] kobject target0:0:9: cleaning up
[ 44.498231] kobject target0:0:9: cleaning up
[ 44.498237] kobject target0:0:10: registering. parent: host0, set: devices
[ 44.498245] kobject target0:0:10: registering. parent: spi_transport, set: class_obj
[ 44.754374] kobject <NULL>: cleaning up
[ 44.754388] kobject target0:0:10: cleaning up
[ 44.754391] kobject target0:0:10: cleaning up
[ 44.754397] kobject target0:0:11: registering. parent: host0, set: devices
[ 44.754405] kobject target0:0:11: registering. parent: spi_transport, set: class_obj
[ 45.010534] kobject <NULL>: cleaning up
[ 45.010547] kobject target0:0:11: cleaning up
[ 45.010551] kobject target0:0:11: cleaning up
[ 45.010556] kobject target0:0:12: registering. parent: host0, set: devices
[ 45.010564] kobject target0:0:12: registering. parent: spi_transport, set: class_obj
[ 45.266692] kobject <NULL>: cleaning up
[ 45.266706] kobject target0:0:12: cleaning up
[ 45.266709] kobject target0:0:12: cleaning up
[ 45.266714] kobject target0:0:13: registering. parent: host0, set: devices
[ 45.266722] kobject target0:0:13: registering. parent: spi_transport, set: class_obj
[ 45.522851] kobject <NULL>: cleaning up
[ 45.522864] kobject target0:0:13: cleaning up
[ 45.522867] kobject target0:0:13: cleaning up
[ 45.522873] kobject target0:0:14: registering. parent: host0, set: devices
[ 45.522881] kobject target0:0:14: registering. parent: spi_transport, set: class_obj
[ 45.779010] kobject <NULL>: cleaning up
[ 45.779023] kobject target0:0:14: cleaning up
[ 45.779026] kobject target0:0:14: cleaning up
[ 45.779032] kobject target0:0:15: registering. parent: host0, set: devices
[ 45.779040] kobject target0:0:15: registering. parent: spi_transport, set: class_obj
[ 46.035168] kobject <NULL>: cleaning up
[ 46.035182] kobject target0:0:15: cleaning up
[ 46.035185] kobject target0:0:15: cleaning up
[ 46.035218] kobject sd: registering. parent: <NULL>, set: drivers
[ 46.036144] SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
[ 46.040009] SCSI device sda: drive cache: write back
[ 46.042622] kobject sda: registering. parent: <NULL>, set: block
[ 46.043558] SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
[ 46.047467] SCSI device sda: drive cache: write back
[ 46.050117] sda: sda1 sda2 sda3 sda4
[ 46.074908] kobject sda1: registering. parent: sda, set: <NULL>
[ 46.074921] kobject sda2: registering. parent: sda, set: <NULL>
[ 46.074927] kobject sda3: registering. parent: sda, set: <NULL>
[ 46.074934] kobject sda4: registering. parent: sda, set: <NULL>
[ 46.074957] kobject queue: registering. parent: sda, set: <NULL>
[ 46.074965] kobject iosched: registering. parent: queue, set: <NULL>
[ 46.074972] Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
[ 46.077641] kobject sr: registering. parent: <NULL>, set: drivers
[ 46.079568] sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
[ 46.082224] Uniform CD-ROM driver Revision: 3.20
[ 46.084874] kobject sr0: registering. parent: <NULL>, set: block
[ 46.084886] kobject queue: registering. parent: sr0, set: <NULL>
[ 46.084892] kobject iosched: registering. parent: queue, set: <NULL>
[ 46.084899] Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
[ 46.089717] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 46.092388] kobject sr1: registering. parent: <NULL>, set: block
[ 46.092409] kobject queue: registering. parent: sr1, set: <NULL>
[ 46.092415] kobject iosched: registering. parent: queue, set: <NULL>
[ 46.092422] Attached scsi CD-ROM sr1 at scsi0, channel 0, id 5, lun 0
<...>
next prev parent reply other threads:[~2005-08-08 17:54 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-07 18:47 Linux-2.6.13-rc6: aic7xxx testers please Linus Torvalds
2005-08-07 20:23 ` Heikki Orsila
2005-08-07 20:38 ` Lee Revell
2005-08-07 20:50 ` Linus Torvalds
2005-08-07 20:52 ` Lee Revell
2005-08-07 21:14 ` Dumitru Ciobarcianu
2005-08-08 14:17 ` Theodore Ts'o
2005-08-07 22:12 ` [2.6 patch] fix drivers/s390/net/ compilation Adrian Bunk
2005-08-08 8:31 ` Martin Schwidefsky
2005-08-08 12:59 ` Linux-2.6.13-rc6: aic7xxx testers please John Stoffel
2005-08-08 15:08 ` Danny ter Haar
2005-08-08 17:54 ` Jesper Juhl [this message]
2005-08-09 19:35 ` John Stoffel
2005-08-09 19:58 ` James Bottomley
2005-08-09 20:12 ` John Stoffel
2005-08-10 0:50 ` James Bottomley
2005-08-10 15:28 ` John Stoffel
2005-08-10 15:46 ` James Bottomley
2005-08-10 16:27 ` John Stoffel
2005-08-11 2:30 ` John Stoffel
2005-08-11 6:34 ` Philipp Matthias Hahn
2005-08-11 6:42 ` Philipp Matthias Hahn
2005-08-11 9:54 ` Johannes Stezenbach
2005-08-11 12:37 ` hunold
2005-08-11 14:51 ` Gene Heskett
2005-08-11 15:38 ` cx88 teletext not yet implemented -was- " Michael Krufky
2005-08-11 21:53 ` Gene Heskett
2005-08-11 15:30 ` Philipp Matthias Hahn
[not found] ` <20050815071723.GB8524@titan.lahn.de>
[not found] ` <20050815215855.GB5860@linuxtv.org>
[not found] ` <E1E4vSG-0005r7-KG@allen.werkleitz.de>
2005-08-24 6:59 ` [PATCH] saa7146_i2c device model integration Philipp Matthias Hahn
2005-08-31 12:14 ` Johannes Stezenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200508081954.52638.jesper.juhl@gmail.com \
--to=jesper.juhl@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox