From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932364AbVHNX7s (ORCPT ); Sun, 14 Aug 2005 19:59:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932536AbVHNX7s (ORCPT ); Sun, 14 Aug 2005 19:59:48 -0400 Received: from omta01ps.mx.bigpond.com ([144.140.82.153]:65001 "EHLO omta01ps.mx.bigpond.com") by vger.kernel.org with ESMTP id S932364AbVHNX7r (ORCPT ); Sun, 14 Aug 2005 19:59:47 -0400 Date: Mon, 15 Aug 2005 09:59:27 +1000 From: CaT To: Alan Cox Cc: Daniel Drake , linux-kernel@vger.kernel.org Subject: Re: IT8212/ITE RAID Message-ID: <20050814235927.GC27824@zip.com.au> References: <20050814053017.GA27824@zip.com.au> <42FF263A.8080009@gentoo.org> <20050814114733.GB27824@zip.com.au> <42FF3CBA.1030900@gentoo.org> <1124026385.14138.37.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1124026385.14138.37.camel@localhost.localdomain> Organisation: Furball Inc. User-Agent: Mutt/1.5.9i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Sun, Aug 14, 2005 at 02:33:05PM +0100, Alan Cox wrote: > What does a full identify data set for the drive look like ? Here it is for the two drives. Please note that multisect was turned on manually as well as the security freeze. /dev/hda: ATA device, with non-removable media Model Number: ST3200822A Serial Number: 3LJ22Y8F Firmware Revision: 3.01 Standards: Used: ATA/ATAPI-6 T13 1410D revision 2 Supported: 6 5 4 3 Configuration: Logical max current cylinders 16383 65535 heads 16 1 sectors/track 63 63 -- CHS current addressable sectors: 4128705 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 390721968 device size with M = 1024*1024: 190782 MBytes device size with M = 1000*1000: 200049 MBytes (200 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 4 Queue depth: 1 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 128, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * 48-bit Address feature set SET MAX security extension Security: supported not enabled not locked frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- above Vih Device num = 0 determined by CSEL Checksum: correct /dev/hdc: ATA device, with non-removable media powers-up in standby; SET FEATURES subcmd spins-up. Model Number: IC35L060AVV207-0 Serial Number: VNVB01G2RAK8XH Firmware Revision: V22OA63A Standards: Used: ATA/ATAPI-6 T13 1410D revision 3a Supported: 6 5 4 3 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 120103200 LBA48 user addressable sectors: 120103200 device size with M = 1024*1024: 58644 MBytes device size with M = 1000*1000: 61492 MBytes (61 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 52 Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: unknown setting (0x0000) Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set Release interrupt * Look-ahead * Write cache * Power Management feature set Security Mode feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * 48-bit Address feature set Automatic Acoustic Management feature set SET MAX security extension Address Offset Reserved Area Boot SET FEATURES subcommand required to spinup after power up Power-Up In Standby feature set Advanced Power Management feature set * General Purpose Logging feature set Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase 30min for SECURITY ERASE UNIT. HW reset results: CBLID- above Vih Device num = 0 determined by the jumper Checksum: correct -- "To the extent that we overreact, we proffer the terrorists the greatest tribute." - High Court Judge Michael Kirby