Re: rc5 seemed to kill a disk that rc4-mm1 likes. Also some X trouble.

[Rolf Eike Beer <eike-kernel@sf-tec.de>]

[-- Attachment #1: Type: text/plain, Size: 1438 bytes --]

Helge Hafting wrote:
>Dave Airlie wrote:
>>     I switched back to 2.6.13-rc4-mm1 at this point for another reason,
>>     my X display aquired a nasty tendency to go blank for no reason
>>     during work,
>>     something I could fix by changing resolution baqck and forth.  X
>>     also tended to get
>>     stuck for a minute now and then - a problem I haven't seen since
>>     early 2.6.
>>
>>
>>
>> which head the radeon or MGA or both?
>
>The radeon 9200SE-pci gets stuck.  The MGA-agp seems to be fine. I have
>compiled
>dri support for both, but I can't use it at the moment.  I think that is
>caused by having ubuntu's xorg installed on debian.  I needed xorg
>in order to run an xserver that doesn't use any tty - this way I can use
>two keyboards and have two simultaneous users. Debians xorg wasn't ready
>at the moment. The setup is fine with 2.6.13-rc4-mm1 x86-64, no problems
>there.

I have some other issue with a MGA card (don't know exactly which, I have only 
access to this on the weekend). With rc5 and rc6 kdm will not start on 
bootup, X complains about some unresolved symbols in the X mga driver. If I 
log in as user and do startx it works fine, also if I switch back to 
2.6.12-rc-something. Something seems to confuse X somehow.

It's a PII-350 with more or less SuSE 9.3. The machine has no net access, so I 
can only try to narrow it down to one rc at the weekend.

Eike

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]