From: Willy Tarreau <willy@w.ods.org>
To: Nathan Becker <nbecker@physics.ucsb.edu>
Cc: linux-kernel@vger.kernel.org
Subject: Re: strange CPU speedups with SMP on Athlon 64 X2
Date: Wed, 31 Aug 2005 06:51:31 +0200 [thread overview]
Message-ID: <20050831045131.GG10110@alpha.home.local> (raw)
In-Reply-To: <Pine.LNX.4.63.0508301153340.10786@claven.physics.ucsb.edu>
Hi,
stupid question : isn't it possible that your motherboard does some sort of
overclocking when it detects high cpu usage (bus activity, etc...) ? It
should not be easy to check (rdtsc every second ?), but you might want to
explore such a possibility.
Regards,
willy
On Tue, Aug 30, 2005 at 12:16:04PM -0700, Nathan Becker wrote:
> Hi,
>
> I'm having a strange problem when I benchmark some of my physics
> simulation code on my new Athlon 64 X2 4800 machine. It occurs on all
> current kernels that I have tested including 2.6.12.5 and 2.6.13.
>
> If I run my benchmark single threaded, so that one of the two CPU cores
> is just idling then the calculation goes pretty fast. But if I load both
> CPU cores simultaneously but with INDEPENDENT calculations, then each
> calculation runs about 12-15% faster than when running alone. I have
> found this to be always reproducible. There is no disk access involved
> in the calculation and RAM usage is fairly minimal so this is not caused
> by caching. Also, if I compile the kernel to disable SMP then the machine
> runs a single calculation at the same speed as when running alone when
> SMP is enabled.
>
> I am aware of the timing issues on these machines (especially since I
> reported the bug http://bugzilla.kernel.org/show_bug.cgi?id=5105 ).
> However, I double-checked my benchmark with a stop-watch, so this is
> independent of something strange happening in the timer.
>
> I also checked the cpufreq governor and according to the logs, my CPU is
> holding steady at the maximum setting of 2.4GHz. I set the governor to
> "performance" mode which should prevent unintended downclocking.
>
> I would be happy to post my exact C source that I use to do the
> benchmark, but I wanted to get some feedback first in case I'm just doing
> something stupid. Also, since I'm not subscribed to this list, please cc
> me directly regarding this topic.
>
> Thanks very much,
>
> Nathan
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2005-08-31 4:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-30 19:16 strange CPU speedups with SMP on Athlon 64 X2 Nathan Becker
2005-08-31 4:51 ` Willy Tarreau [this message]
2005-08-31 11:59 ` Nick Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050831045131.GG10110@alpha.home.local \
--to=willy@w.ods.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nbecker@physics.ucsb.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox