From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org,
Svante Olofsson <svante@agentum.com>,
Patrick Boettcher <pb@linuxtv.org>
Subject: [DVB patch 29/54] usb: digitv: support for nxt6000 demod
Date: Mon, 05 Sep 2005 01:23:28 +0200 [thread overview]
Message-ID: <20050904232327.234883000@abc> (raw)
In-Reply-To: 20050904232259.777473000@abc
[-- Attachment #1: dvb-usb-digitv-nxt6000.patch --]
[-- Type: text/plain, Size: 3655 bytes --]
From: Svante Olofsson <svante@agentum.com>
Add support for the NXT6000-based digitv-box.
Add .get_tune_settings callback for the NXT6000 to have a min_tune_delay of 500ms.
Signed-off-by: Svante Olofsson <svante@agentum.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
drivers/media/dvb/dvb-usb/digitv.c | 40 ++++++++++++++++++++--------------
drivers/media/dvb/frontends/nxt6000.c | 9 +++++++
2 files changed, 33 insertions(+), 16 deletions(-)
--- linux-2.6.13-git4.orig/drivers/media/dvb/dvb-usb/digitv.c 2005-09-04 21:56:59.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/dvb-usb/digitv.c 2005-09-04 22:28:22.000000000 +0200
@@ -113,31 +113,28 @@ static int digitv_mt352_demod_init(struc
}
static struct mt352_config digitv_mt352_config = {
- .demod_address = 0x0, /* ignored by the digitv anyway */
.demod_init = digitv_mt352_demod_init,
.pll_set = dvb_usb_pll_set,
};
-static struct nxt6000_config digitv_nxt6000_config = {
- .demod_address = 0x0, /* ignored by the digitv anyway */
- .clock_inversion = 0x0,
+static int digitv_nxt6000_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+{
+ struct dvb_usb_device *d = fe->dvb->priv;
+ u8 b[5];
+ dvb_usb_pll_set(fe,fep,b);
+ return digitv_ctrl_msg(d,USB_WRITE_TUNER,0,&b[1],4,NULL,0);
+}
- .pll_init = NULL,
- .pll_set = NULL,
+static struct nxt6000_config digitv_nxt6000_config = {
+ .clock_inversion = 1,
+ .pll_set = digitv_nxt6000_pll_set,
};
static int digitv_frontend_attach(struct dvb_usb_device *d)
{
- if ((d->fe = mt352_attach(&digitv_mt352_config, &d->i2c_adap)) != NULL)
+ if ((d->fe = mt352_attach(&digitv_mt352_config, &d->i2c_adap)) != NULL ||
+ (d->fe = nxt6000_attach(&digitv_nxt6000_config, &d->i2c_adap)) != NULL)
return 0;
- if ((d->fe = nxt6000_attach(&digitv_nxt6000_config, &d->i2c_adap)) != NULL) {
-
- warn("nxt6000 support is not done yet, in fact you are one of the first "
- "person who wants to use this device in Linux. Please report to "
- "linux-dvb@linuxtv.org");
-
- return 0;
- }
return -EIO;
}
@@ -175,7 +172,18 @@ static struct dvb_usb_properties digitv_
static int digitv_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- return dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,NULL);
+ struct dvb_usb_device *d;
+ int ret;
+ if ((ret = dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE,&d)) == 0) {
+ u8 b[4] = { 0 };
+
+ b[0] = 1;
+ digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0);
+
+ b[0] = 0;
+ digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0);
+ }
+ return ret;
}
static struct usb_device_id digitv_table [] = {
--- linux-2.6.13-git4.orig/drivers/media/dvb/frontends/nxt6000.c 2005-09-04 22:24:23.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/frontends/nxt6000.c 2005-09-04 22:28:22.000000000 +0200
@@ -482,6 +482,7 @@ static int nxt6000_set_frontend(struct d
if ((result = nxt6000_set_inversion(state, param->inversion)) < 0)
return result;
+ msleep(500);
return 0;
}
@@ -525,6 +526,12 @@ static int nxt6000_read_signal_strength(
return 0;
}
+static int nxt6000_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 500;
+ return 0;
+}
+
static struct dvb_frontend_ops nxt6000_ops;
struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
@@ -577,6 +584,8 @@ static struct dvb_frontend_ops nxt6000_o
.release = nxt6000_release,
.init = nxt6000_init,
+
+ .get_tune_settings = nxt6000_fe_get_tune_settings,
.set_frontend = nxt6000_set_frontend,
--
next prev parent reply other threads:[~2005-09-04 23:37 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-04 23:22 [DVB patch 00/54] DVB update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 01/54] email address update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 02/54] remove version.h dependencies Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 03/54] avoid building empty built-in.o Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 04/54] core: glue code for DMX_GET_CAPS and DMX_SET_SOURCE Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 05/54] core: dvb_demux: fix continuity counter error handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 06/54] core: dvb_demux: remove unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 07/54] core: dvb_demux: remove unsused descramble callbacks Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 08/54] core: dvb_demux: remove more unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 09/54] core: dvb_demux: use INIT_LIST_HEAD Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 10/54] core: dvb_demux formatting fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 11/54] core: CI timeout fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 12/54] frontend: mt352: fix signal strength reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 13/54] frontend: stv0299: pass i2c bus to pll callback Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 14/54] frontend: s5h1420: fixes Johannes Stezenbach
2005-09-04 23:56 ` Nish Aravamudan
2005-09-05 8:45 ` Andrew de Quincey
2005-09-04 23:23 ` [DVB patch 15/54] frontend: stv0299: support reading both BER and UCBLOCKS Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 16/54] frontend: tda1004x: fix SNR reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 17/54] frontend: ves1820: improve tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 18/54] frontend: cx24110: DiSEqC fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 19/54] frontend: cx24110: another " Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 20/54] frontend: cx24110: clean up timeout handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 21/54] frontend: stv0297: QAM128 tuning improvement Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 22/54] frontend: or51132: remove bogus optimization attempt Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 23/54] usb: add TwinhanDTV StarBox support Johannes Stezenbach
2005-09-04 23:52 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 24/54] usb: dibusb: Kworld Xpert DVB-T USB2.0 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 25/54] usb: removed empty module_init/exit calls Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 26/54] usb: dtt200u: copy frontend_ops before modifying Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 27/54] usb: dtt200u: add proper device names Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 28/54] usb: core: change dvb_usb_device_init() API Johannes Stezenbach
2005-09-04 23:23 ` Johannes Stezenbach [this message]
2005-09-04 23:23 ` [DVB patch 30/54] usb: white space cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 31/54] usb: cxusb: fixes for new firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 32/54] remove noisy debug print Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 33/54] bt8xx: endianness fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 34/54] bt8xx: cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 35/54] bt8xx: Nebula DigiTV mt352 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 36/54] Nebula DigiTV nxt6000 fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 37/54] dst: fix symbol rate setting Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 38/54] dst: remove unnecessary code Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 39/54] dst: dprrintk cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 40/54] dst: identify boards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 41/54] dst: fix DVB-C tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 42/54] dst: ci doc update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 43/54] dst: Updated Documentation Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 44/54] cinergyT2: remote control fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 45/54] av7110: Siemens DVB-C analog video input support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 46/54] budget-ci: add support for TT DVB-C CI card Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 47/54] budget-av: fixes for CI interface Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 48/54] budget-av: enable frontend on KNC1 Plus cards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 49/54] av7110: disable superflous firmware handshake Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 50/54] av7110: conditionally disable workaround for broken firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 51/54] ttpci: av7110: RC5+ remote control support Johannes Stezenbach
2005-09-04 23:41 ` Nish Aravamudan
2005-09-05 0:13 ` Johannes Stezenbach
2005-09-05 0:16 ` Nish Aravamudan
2005-09-05 0:27 ` Johannes Stezenbach
2005-09-05 0:34 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 52/54] ttpci: add PCI ids for old Siemens/TT DVB-C card Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 53/54] saa7146: i2c vs. sysfs fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 54/54] ttusb-budget: use time_after_eq() Johannes Stezenbach
2005-09-04 23:45 ` Nish Aravamudan
2005-09-05 0:07 ` Johannes Stezenbach
2005-09-05 0:14 ` Nish Aravamudan
2005-09-05 0:19 ` Johannes Stezenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050904232327.234883000@abc \
--to=js@linuxtv.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pb@linuxtv.org \
--cc=svante@agentum.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox