From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, David Johnson <dj@david-web.co.uk>
Subject: [DVB patch 34/54] bt8xx: cleanup
Date: Mon, 05 Sep 2005 01:23:33 +0200 [thread overview]
Message-ID: <20050904232329.281740000@abc> (raw)
In-Reply-To: 20050904232259.777473000@abc
[-- Attachment #1: dvb-bt8xx-formatting-cleanup.patch --]
[-- Type: text/plain, Size: 15708 bytes --]
From: David Johnson <dj@david-web.co.uk>
Indentation fixes and remove unnecessary braces.
Signed-off-by: David Johnson <dj@david-web.co.uk>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
drivers/media/dvb/bt8xx/dvb-bt8xx.c | 229 ++++++++++++++++++------------------
1 file changed, 116 insertions(+), 113 deletions(-)
--- linux-2.6.13-git4.orig/drivers/media/dvb/bt8xx/dvb-bt8xx.c 2005-09-04 22:24:23.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/bt8xx/dvb-bt8xx.c 2005-09-04 22:28:28.000000000 +0200
@@ -32,9 +32,7 @@
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
-
#include "dvb-bt8xx.h"
-
#include "bt878.h"
static int debug;
@@ -43,9 +41,9 @@ module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
#define dprintk( args... ) \
- do { \
+ do \
if (debug) printk(KERN_DEBUG args); \
- } while (0)
+ while (0)
static void dvb_bt8xx_task(unsigned long data)
{
@@ -119,14 +117,12 @@ static struct bt878 __init *dvb_bt8xx_87
unsigned int card_nr;
/* Hmm, n squared. Hope n is small */
- for (card_nr = 0; card_nr < bt878_num; card_nr++) {
+ for (card_nr = 0; card_nr < bt878_num; card_nr++)
if (is_pci_slot_eq(bt878[card_nr].dev, bttv_pci_dev))
return &bt878[card_nr];
- }
return NULL;
}
-
static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x38, 0x38 };
@@ -157,13 +153,19 @@ static int thomson_dtt7579_pll_set(struc
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
- if (params->frequency < 542000000) cp = 0xb4;
- else if (params->frequency < 771000000) cp = 0xbc;
- else cp = 0xf4;
-
- if (params->frequency == 0) bs = 0x03;
- else if (params->frequency < 443250000) bs = 0x02;
- else bs = 0x08;
+ if (params->frequency < 542000000)
+ cp = 0xb4;
+ else if (params->frequency < 771000000)
+ cp = 0xbc;
+ else
+ cp = 0xf4;
+
+ if (params->frequency == 0)
+ bs = 0x03;
+ else if (params->frequency < 443250000)
+ bs = 0x02;
+ else
+ bs = 0x08;
pllbuf[0] = 0xc0; // Note: non-linux standard PLL i2c address
pllbuf[1] = div >> 8;
@@ -175,7 +177,6 @@ static int thomson_dtt7579_pll_set(struc
}
static struct mt352_config thomson_dtt7579_config = {
-
.demod_address = 0x0f,
.demod_init = thomson_dtt7579_demod_init,
.pll_set = thomson_dtt7579_pll_set,
@@ -183,25 +184,26 @@ static struct mt352_config thomson_dtt75
static int cx24108_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
- u32 freq = params->frequency;
-
- int i, a, n, pump;
- u32 band, pll;
+ u32 freq = params->frequency;
+ int i, a, n, pump;
+ u32 band, pll;
- u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
- 1576000,1718000,1856000,2036000,2150000};
- u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
- 0x00102000,0x00104000,0x00108000,0x00110000,
- 0x00120000,0x00140000};
+ u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+ 1576000,1718000,1856000,2036000,2150000};
+ u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+ 0x00102000,0x00104000,0x00108000,0x00110000,
+ 0x00120000,0x00140000};
-#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+ #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
/* This is really the bit driving the tuner chip cx24108 */
- if(freq<950000) freq=950000; /* kHz */
- if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+ if (freq<950000)
+ freq = 950000; /* kHz */
+ else if (freq>2150000)
+ freq = 2150000; /* satellite IF is 950..2150MHz */
/* decide which VCO to use for the input frequency */
for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
@@ -228,25 +230,22 @@ static int cx24108_pll_set(struct dvb_fr
cx24110_pll_write(fe,0x500c0000);
cx24110_pll_write(fe,0x83f1f800);
cx24110_pll_write(fe,pll);
-/* writereg(client,0x56,0x7f);*/
+ //writereg(client,0x56,0x7f);
return 0;
}
static int pinnsat_pll_init(struct dvb_frontend* fe)
{
- return 0;
+ return 0;
}
-
static struct cx24110_config pctvsat_config = {
-
.demod_address = 0x55,
.pll_init = pinnsat_pll_init,
.pll_set = cx24108_pll_set,
};
-
static int microtune_mt7202dtf_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
@@ -258,15 +257,23 @@ static int microtune_mt7202dtf_pll_set(s
div = (36000000 + params->frequency + 83333) / 166666;
cfg = 0x88;
- if (params->frequency < 175000000) cpump = 2;
- else if (params->frequency < 390000000) cpump = 1;
- else if (params->frequency < 470000000) cpump = 2;
- else if (params->frequency < 750000000) cpump = 2;
- else cpump = 3;
-
- if (params->frequency < 175000000) band_select = 0x0e;
- else if (params->frequency < 470000000) band_select = 0x05;
- else band_select = 0x03;
+ if (params->frequency < 175000000)
+ cpump = 2;
+ else if (params->frequency < 390000000)
+ cpump = 1;
+ else if (params->frequency < 470000000)
+ cpump = 2;
+ else if (params->frequency < 750000000)
+ cpump = 2;
+ else
+ cpump = 3;
+
+ if (params->frequency < 175000000)
+ band_select = 0x0e;
+ else if (params->frequency < 470000000)
+ band_select = 0x05;
+ else
+ band_select = 0x03;
data[0] = (div >> 8) & 0x7f;
data[1] = div & 0xff;
@@ -285,14 +292,11 @@ static int microtune_mt7202dtf_request_f
}
static struct sp887x_config microtune_mt7202dtf_config = {
-
.demod_address = 0x70,
.pll_set = microtune_mt7202dtf_pll_set,
.request_firmware = microtune_mt7202dtf_request_firmware,
};
-
-
static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
{
static u8 mt352_clock_config [] = { 0x89, 0x38, 0x2d };
@@ -303,7 +307,6 @@ static int advbt771_samsung_tdtc9251dh0_
static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
-
mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
udelay(2000);
mt352_write(fe, mt352_reset, sizeof(mt352_reset));
@@ -326,25 +329,43 @@ static int advbt771_samsung_tdtc9251dh0_
#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
- if (params->frequency < 150000000) cp = 0xB4;
- else if (params->frequency < 173000000) cp = 0xBC;
- else if (params->frequency < 250000000) cp = 0xB4;
- else if (params->frequency < 400000000) cp = 0xBC;
- else if (params->frequency < 420000000) cp = 0xF4;
- else if (params->frequency < 470000000) cp = 0xFC;
- else if (params->frequency < 600000000) cp = 0xBC;
- else if (params->frequency < 730000000) cp = 0xF4;
- else cp = 0xFC;
-
- if (params->frequency < 150000000) bs = 0x01;
- else if (params->frequency < 173000000) bs = 0x01;
- else if (params->frequency < 250000000) bs = 0x02;
- else if (params->frequency < 400000000) bs = 0x02;
- else if (params->frequency < 420000000) bs = 0x02;
- else if (params->frequency < 470000000) bs = 0x02;
- else if (params->frequency < 600000000) bs = 0x08;
- else if (params->frequency < 730000000) bs = 0x08;
- else bs = 0x08;
+ if (params->frequency < 150000000)
+ cp = 0xB4;
+ else if (params->frequency < 173000000)
+ cp = 0xBC;
+ else if (params->frequency < 250000000)
+ cp = 0xB4;
+ else if (params->frequency < 400000000)
+ cp = 0xBC;
+ else if (params->frequency < 420000000)
+ cp = 0xF4;
+ else if (params->frequency < 470000000)
+ cp = 0xFC;
+ else if (params->frequency < 600000000)
+ cp = 0xBC;
+ else if (params->frequency < 730000000)
+ cp = 0xF4;
+ else
+ cp = 0xFC;
+
+ if (params->frequency < 150000000)
+ bs = 0x01;
+ else if (params->frequency < 173000000)
+ bs = 0x01;
+ else if (params->frequency < 250000000)
+ bs = 0x02;
+ else if (params->frequency < 400000000)
+ bs = 0x02;
+ else if (params->frequency < 420000000)
+ bs = 0x02;
+ else if (params->frequency < 470000000)
+ bs = 0x02;
+ else if (params->frequency < 600000000)
+ bs = 0x08;
+ else if (params->frequency < 730000000)
+ bs = 0x08;
+ else
+ bs = 0x08;
pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address
pllbuf[1] = div >> 8;
@@ -356,19 +377,15 @@ static int advbt771_samsung_tdtc9251dh0_
}
static struct mt352_config advbt771_samsung_tdtc9251dh0_config = {
-
.demod_address = 0x0f,
.demod_init = advbt771_samsung_tdtc9251dh0_demod_init,
.pll_set = advbt771_samsung_tdtc9251dh0_pll_set,
};
-
static struct dst_config dst_config = {
-
.demod_address = 0x55,
};
-
static int or51211_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
{
struct dvb_bt8xx_card* bt = (struct dvb_bt8xx_card*) fe->dvb->priv;
@@ -398,10 +415,9 @@ static void or51211_reset(struct dvb_fro
*/
/* reset & PRM1,2&4 are outputs */
int ret = bttv_gpio_enable(bt->bttv_nr, 0x001F, 0x001F);
- if (ret != 0) {
+ if (ret != 0)
printk(KERN_WARNING "or51211: Init Error - Can't Reset DVR "
"(%i)\n", ret);
- }
bttv_write_gpio(bt->bttv_nr, 0x001F, 0x0000); /* Reset */
msleep(20);
/* Now set for normal operation */
@@ -417,7 +433,6 @@ static void or51211_sleep(struct dvb_fro
}
static struct or51211_config or51211_config = {
-
.demod_address = 0x15,
.request_firmware = or51211_request_firmware,
.setmode = or51211_setmode,
@@ -425,7 +440,6 @@ static struct or51211_config or51211_con
.sleep = or51211_sleep,
};
-
static int vp3021_alps_tded4_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
@@ -454,13 +468,11 @@ static int vp3021_alps_tded4_pll_set(str
}
static struct nxt6000_config vp3021_alps_tded4_config = {
-
.demod_address = 0x0a,
.clock_inversion = 1,
.pll_set = vp3021_alps_tded4_pll_set,
};
-
static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
{
int ret;
@@ -468,7 +480,7 @@ static void frontend_init(struct dvb_bt8
switch(type) {
#ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
+ case BTTV_DVICO_DVBT_LITE:
card->fe = mt352_attach(&thomson_dtt7579_config, card->i2c_adapter);
if (card->fe != NULL) {
card->fe->ops->info.frequency_min = 174000000;
@@ -479,24 +491,22 @@ static void frontend_init(struct dvb_bt8
#endif
#ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
+ case BTTV_TWINHAN_VP3021:
#else
- case BTTV_NEBULA_DIGITV:
+ case BTTV_NEBULA_DIGITV:
#endif
card->fe = nxt6000_attach(&vp3021_alps_tded4_config, card->i2c_adapter);
- if (card->fe != NULL) {
+ if (card->fe != NULL)
break;
- }
break;
- case BTTV_AVDVBT_761:
+ case BTTV_AVDVBT_761:
card->fe = sp887x_attach(µtune_mt7202dtf_config, card->i2c_adapter);
- if (card->fe != NULL) {
+ if (card->fe != NULL)
break;
- }
break;
- case BTTV_AVDVBT_771:
+ case BTTV_AVDVBT_771:
card->fe = mt352_attach(&advbt771_samsung_tdtc9251dh0_config, card->i2c_adapter);
if (card->fe != NULL) {
card->fe->ops->info.frequency_min = 174000000;
@@ -505,7 +515,7 @@ static void frontend_init(struct dvb_bt8
}
break;
- case BTTV_TWINHAN_DST:
+ case BTTV_TWINHAN_DST:
/* DST is not a frontend driver !!! */
state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL);
/* Setup the Card */
@@ -522,54 +532,48 @@ static void frontend_init(struct dvb_bt8
/* Attach other DST peripherals if any */
/* Conditional Access device */
- if (state->dst_hw_cap & DST_TYPE_HAS_CA) {
+ if (state->dst_hw_cap & DST_TYPE_HAS_CA)
ret = dst_ca_attach(state, &card->dvb_adapter);
- }
- if (card->fe != NULL) {
+
+ if (card->fe != NULL)
break;
- }
break;
- case BTTV_PINNACLESAT:
+ case BTTV_PINNACLESAT:
card->fe = cx24110_attach(&pctvsat_config, card->i2c_adapter);
- if (card->fe != NULL) {
+ if (card->fe != NULL)
break;
- }
break;
- case BTTV_PC_HDTV:
+ case BTTV_PC_HDTV:
card->fe = or51211_attach(&or51211_config, card->i2c_adapter);
- if (card->fe != NULL) {
+ if (card->fe != NULL)
break;
- }
break;
}
- if (card->fe == NULL) {
+ if (card->fe == NULL)
printk("dvb-bt8xx: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
card->bt->dev->vendor,
card->bt->dev->device,
card->bt->dev->subsystem_vendor,
card->bt->dev->subsystem_device);
- } else {
+ else
if (dvb_register_frontend(&card->dvb_adapter, card->fe)) {
printk("dvb-bt8xx: Frontend registration failed!\n");
if (card->fe->ops->release)
card->fe->ops->release(card->fe);
card->fe = NULL;
}
- }
}
static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
{
int result;
- if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name,
- THIS_MODULE)) < 0) {
+ if ((result = dvb_register_adapter(&card->dvb_adapter, card->card_name, THIS_MODULE)) < 0) {
printk("dvb_bt8xx: dvb_register_adapter failed (errno = %d)\n", result);
return result;
-
}
card->dvb_adapter.priv = card;
@@ -664,9 +668,8 @@ static int dvb_bt8xx_probe(struct device
strncpy(card->card_name, sub->core->name, sizeof(sub->core->name));
card->i2c_adapter = &sub->core->i2c_adap;
- switch(sub->core->type)
- {
- case BTTV_PINNACLESAT:
+ switch(sub->core->type) {
+ case BTTV_PINNACLESAT:
card->gpio_mode = 0x0400c060;
/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
@@ -675,7 +678,7 @@ static int dvb_bt8xx_probe(struct device
break;
#ifdef BTTV_DVICO_DVBT_LITE
- case BTTV_DVICO_DVBT_LITE:
+ case BTTV_DVICO_DVBT_LITE:
#endif
card->gpio_mode = 0x0400C060;
card->op_sync_orin = 0;
@@ -686,25 +689,25 @@ static int dvb_bt8xx_probe(struct device
break;
#ifdef BTTV_TWINHAN_VP3021
- case BTTV_TWINHAN_VP3021:
+ case BTTV_TWINHAN_VP3021:
#else
- case BTTV_NEBULA_DIGITV:
+ case BTTV_NEBULA_DIGITV:
#endif
- case BTTV_AVDVBT_761:
+ case BTTV_AVDVBT_761:
card->gpio_mode = (1 << 26) | (1 << 14) | (1 << 5);
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
/* A_PWRDN DA_SBR DA_APP (high speed serial) */
break;
- case BTTV_AVDVBT_771: //case 0x07711461:
+ case BTTV_AVDVBT_771: //case 0x07711461:
card->gpio_mode = 0x0400402B;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = 0;
/* A_PWRDN DA_SBR DA_APP[0] PKTP=10 RISC_ENABLE FIFO_ENABLE*/
break;
- case BTTV_TWINHAN_DST:
+ case BTTV_TWINHAN_DST:
card->gpio_mode = 0x2204f2c;
card->op_sync_orin = BT878_RISC_SYNC_MASK;
card->irq_err_ignore = BT878_APABORT | BT878_ARIPERR |
@@ -722,13 +725,13 @@ static int dvb_bt8xx_probe(struct device
* RISC+FIFO ENABLE */
break;
- case BTTV_PC_HDTV:
+ case BTTV_PC_HDTV:
card->gpio_mode = 0x0100EC7B;
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
break;
- default:
+ default:
printk(KERN_WARNING "dvb_bt8xx: Unknown bttv card type: %d.\n",
sub->core->type);
kfree(card);
@@ -751,7 +754,6 @@ static int dvb_bt8xx_probe(struct device
kfree(card);
return -EFAULT;
-
}
init_MUTEX(&card->bt->gpio_lock);
@@ -779,7 +781,8 @@ static int dvb_bt8xx_remove(struct devic
card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw);
dvb_dmxdev_release(&card->dmxdev);
dvb_dmx_release(&card->demux);
- if (card->fe) dvb_unregister_frontend(card->fe);
+ if (card->fe)
+ dvb_unregister_frontend(card->fe);
dvb_unregister_adapter(&card->dvb_adapter);
kfree(card);
--
next prev parent reply other threads:[~2005-09-04 23:40 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-04 23:22 [DVB patch 00/54] DVB update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 01/54] email address update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 02/54] remove version.h dependencies Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 03/54] avoid building empty built-in.o Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 04/54] core: glue code for DMX_GET_CAPS and DMX_SET_SOURCE Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 05/54] core: dvb_demux: fix continuity counter error handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 06/54] core: dvb_demux: remove unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 07/54] core: dvb_demux: remove unsused descramble callbacks Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 08/54] core: dvb_demux: remove more unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 09/54] core: dvb_demux: use INIT_LIST_HEAD Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 10/54] core: dvb_demux formatting fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 11/54] core: CI timeout fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 12/54] frontend: mt352: fix signal strength reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 13/54] frontend: stv0299: pass i2c bus to pll callback Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 14/54] frontend: s5h1420: fixes Johannes Stezenbach
2005-09-04 23:56 ` Nish Aravamudan
2005-09-05 8:45 ` Andrew de Quincey
2005-09-04 23:23 ` [DVB patch 15/54] frontend: stv0299: support reading both BER and UCBLOCKS Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 16/54] frontend: tda1004x: fix SNR reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 17/54] frontend: ves1820: improve tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 18/54] frontend: cx24110: DiSEqC fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 19/54] frontend: cx24110: another " Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 20/54] frontend: cx24110: clean up timeout handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 21/54] frontend: stv0297: QAM128 tuning improvement Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 22/54] frontend: or51132: remove bogus optimization attempt Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 23/54] usb: add TwinhanDTV StarBox support Johannes Stezenbach
2005-09-04 23:52 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 24/54] usb: dibusb: Kworld Xpert DVB-T USB2.0 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 25/54] usb: removed empty module_init/exit calls Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 26/54] usb: dtt200u: copy frontend_ops before modifying Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 27/54] usb: dtt200u: add proper device names Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 28/54] usb: core: change dvb_usb_device_init() API Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 29/54] usb: digitv: support for nxt6000 demod Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 30/54] usb: white space cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 31/54] usb: cxusb: fixes for new firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 32/54] remove noisy debug print Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 33/54] bt8xx: endianness fix Johannes Stezenbach
2005-09-04 23:23 ` Johannes Stezenbach [this message]
2005-09-04 23:23 ` [DVB patch 35/54] bt8xx: Nebula DigiTV mt352 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 36/54] Nebula DigiTV nxt6000 fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 37/54] dst: fix symbol rate setting Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 38/54] dst: remove unnecessary code Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 39/54] dst: dprrintk cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 40/54] dst: identify boards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 41/54] dst: fix DVB-C tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 42/54] dst: ci doc update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 43/54] dst: Updated Documentation Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 44/54] cinergyT2: remote control fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 45/54] av7110: Siemens DVB-C analog video input support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 46/54] budget-ci: add support for TT DVB-C CI card Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 47/54] budget-av: fixes for CI interface Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 48/54] budget-av: enable frontend on KNC1 Plus cards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 49/54] av7110: disable superflous firmware handshake Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 50/54] av7110: conditionally disable workaround for broken firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 51/54] ttpci: av7110: RC5+ remote control support Johannes Stezenbach
2005-09-04 23:41 ` Nish Aravamudan
2005-09-05 0:13 ` Johannes Stezenbach
2005-09-05 0:16 ` Nish Aravamudan
2005-09-05 0:27 ` Johannes Stezenbach
2005-09-05 0:34 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 52/54] ttpci: add PCI ids for old Siemens/TT DVB-C card Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 53/54] saa7146: i2c vs. sysfs fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 54/54] ttusb-budget: use time_after_eq() Johannes Stezenbach
2005-09-04 23:45 ` Nish Aravamudan
2005-09-05 0:07 ` Johannes Stezenbach
2005-09-05 0:14 ` Nish Aravamudan
2005-09-05 0:19 ` Johannes Stezenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050904232329.281740000@abc \
--to=js@linuxtv.org \
--cc=akpm@osdl.org \
--cc=dj@david-web.co.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox