From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, Andrew de Quincey <adq_dvb@lidskialf.net>
Subject: [DVB patch 46/54] budget-ci: add support for TT DVB-C CI card
Date: Mon, 05 Sep 2005 01:23:45 +0200 [thread overview]
Message-ID: <20050904232334.237562000@abc> (raw)
In-Reply-To: 20050904232259.777473000@abc
[-- Attachment #1: dvb-ttpci-add-dvb-c-ci-support.patch --]
[-- Type: text/plain, Size: 15034 bytes --]
From: Andrew de Quincey <adq_dvb@lidskialf.net>
Add support for TT DVB-C CI card.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 97 +++++++++++++++
drivers/media/dvb/frontends/stv0297.c | 121 -------------------
drivers/media/dvb/frontends/stv0297.h | 8 +
drivers/media/dvb/ttpci/av7110.c | 95 +++++++++++++++
drivers/media/dvb/ttpci/budget-ci.c | 188 +++++++++++++++++++++++++++++-
5 files changed, 387 insertions(+), 122 deletions(-)
--- linux-2.6.13-git4.orig/drivers/media/dvb/ttpci/budget-ci.c 2005-09-04 22:28:03.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/ttpci/budget-ci.c 2005-09-04 22:30:55.000000000 +0200
@@ -40,6 +40,7 @@
#include "dvb_ca_en50221.h"
#include "stv0299.h"
+#include "stv0297.h"
#include "tda1004x.h"
#define DEBIADDR_IR 0x1234
@@ -847,6 +848,180 @@ static struct tda1004x_config philips_td
.request_firmware = philips_tdm1316l_request_firmware,
};
+static int dvbc_philips_tdm1316l_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+ u8 tuner_buf[5];
+ struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,
+ .flags = 0,
+ .buf = tuner_buf,
+ .len = sizeof(tuner_buf) };
+ int tuner_frequency = 0;
+ u8 band, cp, filter;
+
+ // determine charge pump
+ tuner_frequency = params->frequency + 36125000;
+ if (tuner_frequency < 87000000)
+ return -EINVAL;
+ else if (tuner_frequency < 130000000) {
+ cp = 3;
+ band = 1;
+ } else if (tuner_frequency < 160000000) {
+ cp = 5;
+ band = 1;
+ } else if (tuner_frequency < 200000000) {
+ cp = 6;
+ band = 1;
+ } else if (tuner_frequency < 290000000) {
+ cp = 3;
+ band = 2;
+ } else if (tuner_frequency < 420000000) {
+ cp = 5;
+ band = 2;
+ } else if (tuner_frequency < 480000000) {
+ cp = 6;
+ band = 2;
+ } else if (tuner_frequency < 620000000) {
+ cp = 3;
+ band = 4;
+ } else if (tuner_frequency < 830000000) {
+ cp = 5;
+ band = 4;
+ } else if (tuner_frequency < 895000000) {
+ cp = 7;
+ band = 4;
+ } else
+ return -EINVAL;
+
+ // assume PLL filter should always be 8MHz for the moment.
+ filter = 1;
+
+ // calculate divisor
+ tuner_frequency = (params->frequency + 36125000 + (62500/2)) / 62500;
+
+ // setup tuner buffer
+ tuner_buf[0] = tuner_frequency >> 8;
+ tuner_buf[1] = tuner_frequency & 0xff;
+ tuner_buf[2] = 0xc8;
+ tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+ tuner_buf[4] = 0x80;
+
+ stv0297_enable_plli2c(fe);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(50);
+
+ stv0297_enable_plli2c(fe);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(1);
+
+ return 0;
+}
+
+static u8 dvbc_philips_tdm1316l_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x09,
+ 0x01, 0x69,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x40,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x40,
+ 0x25, 0x88,
+ 0x30, 0xff,
+ 0x31, 0x00,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x50,
+ 0x35, 0x7f,
+ 0x36, 0x00,
+ 0x37, 0x20,
+ 0x38, 0x00,
+ 0x40, 0x1c,
+ 0x41, 0xff,
+ 0x42, 0x29,
+ 0x43, 0x20,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x00,
+ 0x4b, 0x7b,
+ 0x52, 0x30,
+ 0x55, 0xae,
+ 0x56, 0x47,
+ 0x57, 0xe1,
+ 0x58, 0x3a,
+ 0x5a, 0x1e,
+ 0x5b, 0x34,
+ 0x60, 0x00,
+ 0x63, 0x00,
+ 0x64, 0x00,
+ 0x65, 0x00,
+ 0x66, 0x00,
+ 0x67, 0x00,
+ 0x68, 0x00,
+ 0x69, 0x00,
+ 0x6a, 0x02,
+ 0x6b, 0x00,
+ 0x70, 0xff,
+ 0x71, 0x00,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x00,
+ 0x81, 0x00,
+ 0x82, 0x00,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x80,
+ 0x86, 0x24,
+ 0x87, 0x78,
+ 0x88, 0x10,
+ 0x89, 0x00,
+ 0x90, 0x01,
+ 0x91, 0x01,
+ 0xa0, 0x04,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x53,
+ 0xc1, 0x70,
+ 0xc2, 0x12,
+ 0xd0, 0x00,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x00,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x00,
+ 0x61, 0x38,
+ 0x62, 0x0a,
+ 0x53, 0x13,
+ 0x59, 0x08,
+ 0xff, 0xff,
+};
+
+static struct stv0297_config dvbc_philips_tdm1316l_config = {
+ .demod_address = 0x1c,
+ .inittab = dvbc_philips_tdm1316l_inittab,
+ .invert = 0,
+ .pll_set = dvbc_philips_tdm1316l_pll_set,
+};
+
+
static void frontend_init(struct budget_ci *budget_ci)
@@ -868,6 +1043,15 @@ static void frontend_init(struct budget_
}
break;
+ case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt))
+ budget_ci->tuner_pll_address = 0x61;
+ budget_ci->budget.dvb_frontend =
+ stv0297_attach(&dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ break;
+ }
+ break;
+
case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
budget_ci->tuner_pll_address = 0x63;
budget_ci->budget.dvb_frontend =
@@ -877,7 +1061,7 @@ static void frontend_init(struct budget_
}
break;
- case 0x1012: // Hauppauge/TT Nova-T CI budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
+ case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
budget_ci->tuner_pll_address = 0x60;
budget_ci->budget.dvb_frontend =
tda10046_attach(&philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
@@ -965,10 +1149,12 @@ static struct saa7146_extension budget_e
MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f),
+ MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
{
--- linux-2.6.13-git4.orig/drivers/media/dvb/frontends/stv0297.c 2005-09-04 22:28:12.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/frontends/stv0297.c 2005-09-04 22:30:55.000000000 +0200
@@ -35,7 +35,6 @@ struct stv0297_state {
struct dvb_frontend frontend;
unsigned long base_freq;
- u8 pwm;
};
#if 1
@@ -46,94 +45,6 @@ struct stv0297_state {
#define STV0297_CLOCK_KHZ 28900
-static u8 init_tab[] = {
- 0x00, 0x09,
- 0x01, 0x69,
- 0x03, 0x00,
- 0x04, 0x00,
- 0x07, 0x00,
- 0x08, 0x00,
- 0x20, 0x00,
- 0x21, 0x40,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x24, 0x40,
- 0x25, 0x88,
- 0x30, 0xff,
- 0x31, 0x00,
- 0x32, 0xff,
- 0x33, 0x00,
- 0x34, 0x50,
- 0x35, 0x7f,
- 0x36, 0x00,
- 0x37, 0x20,
- 0x38, 0x00,
- 0x40, 0x1c,
- 0x41, 0xff,
- 0x42, 0x29,
- 0x43, 0x00,
- 0x44, 0xff,
- 0x45, 0x00,
- 0x46, 0x00,
- 0x49, 0x04,
- 0x4a, 0xff,
- 0x4b, 0x7f,
- 0x52, 0x30,
- 0x55, 0xae,
- 0x56, 0x47,
- 0x57, 0xe1,
- 0x58, 0x3a,
- 0x5a, 0x1e,
- 0x5b, 0x34,
- 0x60, 0x00,
- 0x63, 0x00,
- 0x64, 0x00,
- 0x65, 0x00,
- 0x66, 0x00,
- 0x67, 0x00,
- 0x68, 0x00,
- 0x69, 0x00,
- 0x6a, 0x02,
- 0x6b, 0x00,
- 0x70, 0xff,
- 0x71, 0x00,
- 0x72, 0x00,
- 0x73, 0x00,
- 0x74, 0x0c,
- 0x80, 0x00,
- 0x81, 0x00,
- 0x82, 0x00,
- 0x83, 0x00,
- 0x84, 0x04,
- 0x85, 0x80,
- 0x86, 0x24,
- 0x87, 0x78,
- 0x88, 0x00,
- 0x89, 0x00,
- 0x90, 0x01,
- 0x91, 0x01,
- 0xa0, 0x00,
- 0xa1, 0x00,
- 0xa2, 0x00,
- 0xb0, 0x91,
- 0xb1, 0x0b,
- 0xc0, 0x53,
- 0xc1, 0x70,
- 0xc2, 0x12,
- 0xd0, 0x00,
- 0xd1, 0x00,
- 0xd2, 0x00,
- 0xd3, 0x00,
- 0xd4, 0x00,
- 0xd5, 0x00,
- 0xde, 0x00,
- 0xdf, 0x00,
- 0x61, 0x49,
- 0x62, 0x0b,
- 0x53, 0x08,
- 0x59, 0x08,
-};
-
static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data)
{
@@ -378,34 +289,9 @@ static int stv0297_init(struct dvb_front
struct stv0297_state *state = fe->demodulator_priv;
int i;
- /* soft reset */
- stv0297_writereg_mask(state, 0x80, 1, 1);
- stv0297_writereg_mask(state, 0x80, 1, 0);
-
- /* reset deinterleaver */
- stv0297_writereg_mask(state, 0x81, 1, 1);
- stv0297_writereg_mask(state, 0x81, 1, 0);
-
/* load init table */
- for (i = 0; i < sizeof(init_tab); i += 2) {
- stv0297_writereg(state, init_tab[i], init_tab[i + 1]);
- }
-
- /* set a dummy symbol rate */
- stv0297_set_symbolrate(state, 6900);
-
- /* invert AGC1 polarity */
- stv0297_writereg_mask(state, 0x88, 0x10, 0x10);
-
- /* setup bit error counting */
- stv0297_writereg_mask(state, 0xA0, 0x80, 0x00);
- stv0297_writereg_mask(state, 0xA0, 0x10, 0x00);
- stv0297_writereg_mask(state, 0xA0, 0x08, 0x00);
- stv0297_writereg_mask(state, 0xA0, 0x07, 0x04);
-
- /* min + max PWM */
- stv0297_writereg(state, 0x4a, 0x00);
- stv0297_writereg(state, 0x4b, state->pwm);
+ for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2)
+ stv0297_writereg(state, state->config->inittab[i], state->config->inittab[i+1]);
msleep(200);
if (state->config->pll_init)
@@ -738,7 +624,7 @@ static void stv0297_release(struct dvb_f
static struct dvb_frontend_ops stv0297_ops;
struct dvb_frontend *stv0297_attach(const struct stv0297_config *config,
- struct i2c_adapter *i2c, int pwm)
+ struct i2c_adapter *i2c)
{
struct stv0297_state *state = NULL;
@@ -752,7 +638,6 @@ struct dvb_frontend *stv0297_attach(cons
state->i2c = i2c;
memcpy(&state->ops, &stv0297_ops, sizeof(struct dvb_frontend_ops));
state->base_freq = 0;
- state->pwm = pwm;
/* check if the demod is there */
if ((stv0297_readreg(state, 0x80) & 0x70) != 0x20)
--- linux-2.6.13-git4.orig/drivers/media/dvb/frontends/stv0297.h 2005-09-04 22:03:40.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/frontends/stv0297.h 2005-09-04 22:30:55.000000000 +0200
@@ -29,6 +29,12 @@ struct stv0297_config
/* the demodulator's i2c address */
u8 demod_address;
+ /* inittab - array of pairs of values.
+ * First of each pair is the register, second is the value.
+ * List should be terminated with an 0xff, 0xff pair.
+ */
+ u8* inittab;
+
/* does the "inversion" need inverted? */
u8 invert:1;
@@ -38,7 +44,7 @@ struct stv0297_config
};
extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
- struct i2c_adapter* i2c, int pwm);
+ struct i2c_adapter* i2c);
extern int stv0297_enable_plli2c(struct dvb_frontend* fe);
#endif // STV0297_H
--- linux-2.6.13-git4.orig/drivers/media/dvb/ttpci/av7110.c 2005-09-04 22:28:03.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/ttpci/av7110.c 2005-09-04 22:30:55.000000000 +0200
@@ -1934,6 +1934,98 @@ static struct sp8870_config alps_tdlb7_c
};
+static u8 nexusca_stv0297_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x09,
+ 0x01, 0x69,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x40,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x40,
+ 0x25, 0x88,
+ 0x30, 0xff,
+ 0x31, 0x00,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x50,
+ 0x35, 0x7f,
+ 0x36, 0x00,
+ 0x37, 0x20,
+ 0x38, 0x00,
+ 0x40, 0x1c,
+ 0x41, 0xff,
+ 0x42, 0x29,
+ 0x43, 0x00,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x00,
+ 0x4b, 0x7b,
+ 0x52, 0x30,
+ 0x55, 0xae,
+ 0x56, 0x47,
+ 0x57, 0xe1,
+ 0x58, 0x3a,
+ 0x5a, 0x1e,
+ 0x5b, 0x34,
+ 0x60, 0x00,
+ 0x63, 0x00,
+ 0x64, 0x00,
+ 0x65, 0x00,
+ 0x66, 0x00,
+ 0x67, 0x00,
+ 0x68, 0x00,
+ 0x69, 0x00,
+ 0x6a, 0x02,
+ 0x6b, 0x00,
+ 0x70, 0xff,
+ 0x71, 0x00,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x00,
+ 0x81, 0x00,
+ 0x82, 0x00,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x80,
+ 0x86, 0x24,
+ 0x87, 0x78,
+ 0x88, 0x10,
+ 0x89, 0x00,
+ 0x90, 0x01,
+ 0x91, 0x01,
+ 0xa0, 0x04,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x53,
+ 0xc1, 0x70,
+ 0xc2, 0x12,
+ 0xd0, 0x00,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x00,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x00,
+ 0x61, 0x49,
+ 0x62, 0x0b,
+ 0x53, 0x08,
+ 0x59, 0x08,
+ 0xff, 0xff,
+};
static int nexusca_stv0297_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
@@ -1982,6 +2074,7 @@ static int nexusca_stv0297_pll_set(struc
static struct stv0297_config nexusca_stv0297_config = {
.demod_address = 0x1C,
+ .inittab = nexusca_stv0297_inittab,
.invert = 1,
.pll_set = nexusca_stv0297_pll_set,
};
@@ -2259,7 +2352,7 @@ static int frontend_init(struct av7110 *
case 0x000A: // Hauppauge/TT Nexus-CA rev1.X
- av7110->fe = stv0297_attach(&nexusca_stv0297_config, &av7110->i2c_adap, 0x7b);
+ av7110->fe = stv0297_attach(&nexusca_stv0297_config, &av7110->i2c_adap);
if (av7110->fe) {
/* set TDA9819 into DVB mode */
saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD)
--- linux-2.6.13-git4.orig/drivers/media/dvb/b2c2/flexcop-fe-tuner.c 2005-09-04 22:28:03.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/b2c2/flexcop-fe-tuner.c 2005-09-04 22:30:55.000000000 +0200
@@ -334,8 +334,103 @@ static struct mt312_config skystar23_sam
.pll_set = skystar23_samsung_tbdu18132_pll_set,
};
+
+static u8 alps_tdee4_stv0297_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x09,
+ 0x01, 0x69,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x40,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x40,
+ 0x25, 0x88,
+ 0x30, 0xff,
+ 0x31, 0x00,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x50,
+ 0x35, 0x7f,
+ 0x36, 0x00,
+ 0x37, 0x20,
+ 0x38, 0x00,
+ 0x40, 0x1c,
+ 0x41, 0xff,
+ 0x42, 0x29,
+ 0x43, 0x00,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x00,
+ 0x4b, 0xf8,
+ 0x52, 0x30,
+ 0x55, 0xae,
+ 0x56, 0x47,
+ 0x57, 0xe1,
+ 0x58, 0x3a,
+ 0x5a, 0x1e,
+ 0x5b, 0x34,
+ 0x60, 0x00,
+ 0x63, 0x00,
+ 0x64, 0x00,
+ 0x65, 0x00,
+ 0x66, 0x00,
+ 0x67, 0x00,
+ 0x68, 0x00,
+ 0x69, 0x00,
+ 0x6a, 0x02,
+ 0x6b, 0x00,
+ 0x70, 0xff,
+ 0x71, 0x00,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x00,
+ 0x81, 0x00,
+ 0x82, 0x00,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x80,
+ 0x86, 0x24,
+ 0x87, 0x78,
+ 0x88, 0x10,
+ 0x89, 0x00,
+ 0x90, 0x01,
+ 0x91, 0x01,
+ 0xa0, 0x04,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x53,
+ 0xc1, 0x70,
+ 0xc2, 0x12,
+ 0xd0, 0x00,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x00,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x00,
+ 0x61, 0x49,
+ 0x62, 0x0b,
+ 0x53, 0x08,
+ 0x59, 0x08,
+ 0xff, 0xff,
+};
+
static struct stv0297_config alps_tdee4_stv0297_config = {
.demod_address = 0x1c,
+ .inittab = alps_tdee4_stv0297_inittab,
// .invert = 1,
// .pll_set = alps_tdee4_stv0297_pll_set,
};
@@ -369,7 +464,7 @@ int flexcop_frontend_init(struct flexcop
info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
} else
/* try the cable dvb (stv0297) */
- if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
+ if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_CABLE;
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
--
next prev parent reply other threads:[~2005-09-04 23:33 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-04 23:22 [DVB patch 00/54] DVB update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 01/54] email address update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 02/54] remove version.h dependencies Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 03/54] avoid building empty built-in.o Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 04/54] core: glue code for DMX_GET_CAPS and DMX_SET_SOURCE Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 05/54] core: dvb_demux: fix continuity counter error handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 06/54] core: dvb_demux: remove unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 07/54] core: dvb_demux: remove unsused descramble callbacks Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 08/54] core: dvb_demux: remove more unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 09/54] core: dvb_demux: use INIT_LIST_HEAD Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 10/54] core: dvb_demux formatting fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 11/54] core: CI timeout fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 12/54] frontend: mt352: fix signal strength reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 13/54] frontend: stv0299: pass i2c bus to pll callback Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 14/54] frontend: s5h1420: fixes Johannes Stezenbach
2005-09-04 23:56 ` Nish Aravamudan
2005-09-05 8:45 ` Andrew de Quincey
2005-09-04 23:23 ` [DVB patch 15/54] frontend: stv0299: support reading both BER and UCBLOCKS Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 16/54] frontend: tda1004x: fix SNR reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 17/54] frontend: ves1820: improve tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 18/54] frontend: cx24110: DiSEqC fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 19/54] frontend: cx24110: another " Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 20/54] frontend: cx24110: clean up timeout handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 21/54] frontend: stv0297: QAM128 tuning improvement Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 22/54] frontend: or51132: remove bogus optimization attempt Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 23/54] usb: add TwinhanDTV StarBox support Johannes Stezenbach
2005-09-04 23:52 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 24/54] usb: dibusb: Kworld Xpert DVB-T USB2.0 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 25/54] usb: removed empty module_init/exit calls Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 26/54] usb: dtt200u: copy frontend_ops before modifying Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 27/54] usb: dtt200u: add proper device names Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 28/54] usb: core: change dvb_usb_device_init() API Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 29/54] usb: digitv: support for nxt6000 demod Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 30/54] usb: white space cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 31/54] usb: cxusb: fixes for new firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 32/54] remove noisy debug print Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 33/54] bt8xx: endianness fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 34/54] bt8xx: cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 35/54] bt8xx: Nebula DigiTV mt352 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 36/54] Nebula DigiTV nxt6000 fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 37/54] dst: fix symbol rate setting Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 38/54] dst: remove unnecessary code Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 39/54] dst: dprrintk cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 40/54] dst: identify boards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 41/54] dst: fix DVB-C tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 42/54] dst: ci doc update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 43/54] dst: Updated Documentation Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 44/54] cinergyT2: remote control fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 45/54] av7110: Siemens DVB-C analog video input support Johannes Stezenbach
2005-09-04 23:23 ` Johannes Stezenbach [this message]
2005-09-04 23:23 ` [DVB patch 47/54] budget-av: fixes for CI interface Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 48/54] budget-av: enable frontend on KNC1 Plus cards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 49/54] av7110: disable superflous firmware handshake Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 50/54] av7110: conditionally disable workaround for broken firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 51/54] ttpci: av7110: RC5+ remote control support Johannes Stezenbach
2005-09-04 23:41 ` Nish Aravamudan
2005-09-05 0:13 ` Johannes Stezenbach
2005-09-05 0:16 ` Nish Aravamudan
2005-09-05 0:27 ` Johannes Stezenbach
2005-09-05 0:34 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 52/54] ttpci: add PCI ids for old Siemens/TT DVB-C card Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 53/54] saa7146: i2c vs. sysfs fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 54/54] ttusb-budget: use time_after_eq() Johannes Stezenbach
2005-09-04 23:45 ` Nish Aravamudan
2005-09-05 0:07 ` Johannes Stezenbach
2005-09-05 0:14 ` Nish Aravamudan
2005-09-05 0:19 ` Johannes Stezenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050904232334.237562000@abc \
--to=js@linuxtv.org \
--cc=adq_dvb@lidskialf.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox