[PATCH] ibmphp: Use dword accessors for PCI_ROM_ADDRESS

[Adam Kropelin <akropel1@rochester.rr.com>]

PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed
using pci_bus_{read,write}_config_dword(). A recent audit of drivers/
turned up several cases of byte- and word-sized accesses. The harmful
ones were fixed by Linus directly. This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>

--- linux-2.6.14-rc1.orig/drivers/pci/hotplug/ibmphp_pci.c	2005-06-17 15:48:29.000000000 -0400
+++ linux-2.6.14-rc1/drivers/pci/hotplug/ibmphp_pci.c	2005-09-13 11:49:10.000000000 -0400
@@ -558,7 +558,7 @@
 	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE);
 	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY);
 
-	pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_ROM_ADDRESS, 0x00L);
+	pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_ROM_ADDRESS, 0x00L);
 	pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE);
 
 	return 0;