public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Chris Wright <chrisw@osdl.org>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: Justin Forbes <jmforbes@linuxtx.org>,
	Zwane Mwaikambo <zwane@arm.linux.org.uk>,
	"Theodore Ts'o" <tytso@mit.edu>,
	Randy Dunlap <rdunlap@xenotime.net>,
	Chuck Wolber <chuckw@quantumlinux.com>,
	torvalds@osdl.org, akpm@osdl.org, alan@lxorguk.ukuu.org.uk,
	Willy Tarreau <willy@w.ods.org>, Chris Wright <chrisw@osdl.org>
Subject: [PATCH 06/11] [stable] [ROM 3/3] Sun HME: enable and map PCI ROM properly
Date: Wed, 14 Sep 2005 18:03:49 -0700	[thread overview]
Message-ID: <20050915010405.997069000@localhost.localdomain> (raw)
In-Reply-To: 20050915010343.577985000@localhost.localdomain

[-- Attachment #1: sunhme-enable-and-map-pci-rom-properly.patch --]
[-- Type: text/plain, Size: 2599 bytes --]

-stable review patch.  If anyone has any objections, please let us know.
------------------

This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used
the same PCI ROM mapping code).

Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE).
With it, I get the correct addresses (the ones printed on the label on
the card).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Chris Wright <chrisw@osdl.org>
---
 drivers/net/sunhme.c |   45 ++++++++++++++++++---------------------------
 1 files changed, 18 insertions(+), 27 deletions(-)

Index: linux-2.6.13.y/drivers/net/sunhme.c
===================================================================
--- linux-2.6.13.y.orig/drivers/net/sunhme.c
+++ linux-2.6.13.y/drivers/net/sunhme.c
@@ -2954,7 +2954,7 @@ static int is_quattro_p(struct pci_dev *
 }
 
 /* Fetch MAC address from vital product data of PCI ROM. */
-static void find_eth_addr_in_vpd(void __iomem *rom_base, int len, int index, unsigned char *dev_addr)
+static int find_eth_addr_in_vpd(void __iomem *rom_base, int len, int index, unsigned char *dev_addr)
 {
 	int this_offset;
 
@@ -2977,42 +2977,33 @@ static void find_eth_addr_in_vpd(void __
 
 			for (i = 0; i < 6; i++)
 				dev_addr[i] = readb(p + i);
-			break;
+			return 1;
 		}
 		index--;
 	}
+	return 0;
 }
 
 static void get_hme_mac_nonsparc(struct pci_dev *pdev, unsigned char *dev_addr)
 {
-	u32 rom_reg_orig;
-	void __iomem *p;
-	int index;
+	size_t size;
+	void __iomem *p = pci_map_rom(pdev, &size);
 
-	index = 0;
-	if (is_quattro_p(pdev))
-		index = PCI_SLOT(pdev->devfn);
-
-	if (pdev->resource[PCI_ROM_RESOURCE].parent == NULL) {
-		if (pci_assign_resource(pdev, PCI_ROM_RESOURCE) < 0)
-			goto use_random;
+	if (p) {
+		int index = 0;
+		int found;
+
+		if (is_quattro_p(pdev))
+			index = PCI_SLOT(pdev->devfn);
+
+		found = readb(p) == 0x55 &&
+			readb(p + 1) == 0xaa &&
+			find_eth_addr_in_vpd(p, (64 * 1024), index, dev_addr);
+		pci_unmap_rom(pdev, p);
+		if (found)
+			return;
 	}
 
-	pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_reg_orig);
-	pci_write_config_dword(pdev, pdev->rom_base_reg,
-			       rom_reg_orig | PCI_ROM_ADDRESS_ENABLE);
-
-	p = ioremap(pci_resource_start(pdev, PCI_ROM_RESOURCE), (64 * 1024));
-	if (p != NULL && readb(p) == 0x55 && readb(p + 1) == 0xaa)
-		find_eth_addr_in_vpd(p, (64 * 1024), index, dev_addr);
-
-	if (p != NULL)
-		iounmap(p);
-
-	pci_write_config_dword(pdev, pdev->rom_base_reg, rom_reg_orig);
-	return;
-
-use_random:
 	/* Sun MAC prefix then 3 random bytes. */
 	dev_addr[0] = 0x08;
 	dev_addr[1] = 0x00;

--

  parent reply	other threads:[~2005-09-15  1:04 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-09-15  1:03 [PATCH 00/11] -stable review Chris Wright
2005-09-15  1:03 ` [PATCH 01/11] [PATCH] lost fput in 32bit ioctl on x86-64 Chris Wright
2005-09-15  1:03 ` [PATCH 02/11] [PATCH] Lost sockfd_put() in routing_ioctl() Chris Wright
2005-09-15  1:03 ` [PATCH 03/11] [PATCH] forcedeth: Initialize link settings in every nv_open() Chris Wright
2005-09-15  1:03 ` [PATCH 04/11] hpt366: write the full 4 bytes of ROM address, not just low 1 byte Chris Wright
2005-09-15  2:18   ` David Lang
2005-09-15  2:26     ` Andrew Morton
2005-09-15  2:29       ` [PATCH 04/11] hpt366: write the full 4 bytes of ROM address,not " David Lang
2005-09-15  6:11     ` [PATCH 04/11] hpt366: write the full 4 bytes of ROM address, not " Chris Wright
2005-09-15 10:39       ` David Lang
2005-09-15 10:28   ` Martin Mares
2005-09-15  1:03 ` [PATCH 05/11] Sun GEM ethernet: enable and map PCI ROM properly Chris Wright
2005-09-15  1:03 ` Chris Wright [this message]
2005-09-15  1:03 ` [PATCH 07/11] [NETFILTER]: Fix DHCP + MASQUERADE problem Chris Wright
2005-09-15  1:03 ` [PATCH 08/11] jfs: jfs_delete_inode must call clear_inode Chris Wright
2005-09-15  1:03 ` [PATCH 09/11] [PATCH] Fix MPOL_F_VERIFY Chris Wright
2005-09-15  1:03 ` [PATCH 10/11] Fix up more strange byte writes to the PCI_ROM_ADDRESS config word Chris Wright
2005-09-15  1:03 ` [PATCH 11/11] USB: ftdi_sio: custom baud rate fix Chris Wright
2005-09-15  7:36 ` [PATCH 00/11] -stable review Alexander Nyberg
2005-09-15 20:04   ` Chris Wright

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050915010405.997069000@localhost.localdomain \
    --to=chrisw@osdl.org \
    --cc=akpm@osdl.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=chuckw@quantumlinux.com \
    --cc=jmforbes@linuxtx.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rdunlap@xenotime.net \
    --cc=stable@kernel.org \
    --cc=torvalds@osdl.org \
    --cc=tytso@mit.edu \
    --cc=willy@w.ods.org \
    --cc=zwane@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox