From: Lukas Hejtmanek <xhejtman@mail.muni.cz>
To: linux-kernel@vger.kernel.org
Cc: jan@kcore.org
Subject: Re: ACPI S3 and ieee1394 don't get along
Date: Thu, 15 Sep 2005 16:21:34 +0200 [thread overview]
Message-ID: <20050915142134.GD2428@mail.muni.cz> (raw)
Hello,
I found, that if you insert module ohci1394 before S3, than everything is ok
after resume.
Next, if you do not do that, then after resume modprobe ohci1394 fails:
(I added dump_stack() to see what happened)
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 16 (level, low) -> IRQ 16
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
[pg0+526438805/1069020160] set_phy_reg+0xc5/0xe0 [ohci1394]
[pg0+526440116/1069020160] ohci_initialize+0xb4/0x330 [ohci1394]
[pg0+526449792/1069020160] ohci_irq_handler+0x0/0x850 [ohci1394]
[request_irq+142/192] request_irq+0x8e/0xc0
[pg0+526457413/1069020160] ohci1394_pci_probe+0x455/0x6b0 [ohci1394]
[pg0+526449792/1069020160] ohci_irq_handler+0x0/0x850 [ohci1394]
[__pci_device_probe+95/112] __pci_device_probe+0x5f/0x70
[pci_device_probe+47/96] pci_device_probe+0x2f/0x60
[driver_probe_device+56/208] driver_probe_device+0x38/0xd0
[__driver_attach+0/80] __driver_attach+0x0/0x50
[__driver_attach+65/80] __driver_attach+0x41/0x50
[bus_for_each_dev+93/128] bus_for_each_dev+0x5d/0x80
[driver_attach+37/48] driver_attach+0x25/0x30
[__driver_attach+0/80] __driver_attach+0x0/0x50
[bus_add_driver+132/240] bus_add_driver+0x84/0xf0
[pci_register_driver+109/128] pci_register_driver+0x6d/0x80
[pg0+524607503/1069020160] ohci1394_init+0xf/0x11 [ohci1394]
[sys_init_module+330/512] sys_init_module+0x14a/0x200
[syscall_call+7/11] syscall_call+0x7/0xb
ohci1394: fw-host0: Runaway loop while stopping context: ...
However, module is loaded but nonfunctional. BUT if you do S3 again, then after
resume module can be unloaded and next modprobe ohci1394 is now working! (Tested
right now.)
--
Lukáš Hejtmánek
next reply other threads:[~2005-09-15 14:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-15 14:21 Lukas Hejtmanek [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-09-13 9:56 ACPI S3 and ieee1394 don't get along Jan De Luyck
2005-09-13 10:20 ` Pavel Machek
2005-09-14 0:20 ` Stefan Richter
2005-09-14 8:46 ` Pavel Machek
2005-09-14 0:17 ` Stefan Richter
2005-09-14 5:08 ` Jan De Luyck
2005-09-14 20:54 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050915142134.GD2428@mail.muni.cz \
--to=xhejtman@mail.muni.cz \
--cc=jan@kcore.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox