From: Andrew Morton <akpm@osdl.org>
To: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: ncunningham@cyclades.com, shaohua.li@intel.com, vatsa@in.ibm.com,
Linux-Kernel@vger.kernel.org, spyro@f2s.com
Subject: Re: [PATCH 2.6.14-rc1-git5] sched: disable preempt in idle tasks
Date: Wed, 21 Sep 2005 18:31:38 -0700 [thread overview]
Message-ID: <20050921183138.52bcdf27.akpm@osdl.org> (raw)
In-Reply-To: <43317F3E.9090207@yahoo.com.au>
Nick Piggin <nickpiggin@yahoo.com.au> wrote:
>
> This patch should hopefully fix Nigel's bug.
>
> Split out from sched-resched-opt.patch. Tested on i386 with acpi idle
> and poll idle (previous iterations tested on various other architectures).
This makes the emt64 machine reboot itself, which iirc was the behaviour in
the failing patch from which this one was split out.
The machine is using acpi_processor_idle().
Wed Sep 21 16:15:07 PDT 2005
Bootdata ok (command line is ro root=/dev/sda3 console=ttyS0)
Linux version 2.6.14-rc2-mm1 (akpm@x) (gcc version 3.4.2 20041017 (Red Hat 3.4.5
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ebbd0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
BIOS-e820: 000000007ffd0000 - 000000007ffdf000 (ACPI data)
BIOS-e820: 000000007ffdf000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:3 APIC version 20
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec81400] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec81400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to flat
ACPI: HPET id: 0x8086a202 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Checking aperture...
Built 1 zonelists
Initializing CPU#0
Kernel command line: ro root=/dev/sda3 console=ttyS0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 3400.276 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Placing software IO TLB between 0x6a81000 - 0xaa81000
Memory: 4029344k/6291456k available (3009k kernel code, 164152k reserved, 1758k)
Calibrating delay using timer specific routine.. 6810.03 BogoMIPS (lpj=13620075)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
mtrr: v2.0 (20020519)
tbxface-0109 [02] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:....................................................
Table [DSDT](id 0005) - 461 Objects with 50 Devices 130 Methods 11 Regions
ACPI Namespace successfully loaded at root ffffffff806078c0
evxfevnt-0091 [03] enable : Transition to ACPI mode successful
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
setup_APIC_timer
done
softlockup thread 0 started up.
Booting processor 1/4 APIC 0x6
next prev parent reply other threads:[~2005-09-22 1:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-21 15:41 [PATCH 2.6.14-rc1-git5] sched: disable preempt in idle tasks Nick Piggin
2005-09-21 21:43 ` Nigel Cunningham
2005-09-22 1:31 ` Andrew Morton [this message]
2005-09-22 3:25 ` Nick Piggin
2005-09-22 9:03 ` Andi Kleen
2005-09-25 23:24 ` Nigel Cunningham
2005-10-06 23:03 ` Nigel Cunningham
-- strict thread matches above, loose matches on Subject: below --
2005-11-02 2:33 Li, Shaohua
2005-11-02 2:46 ` Nick Piggin
2005-11-02 5:04 ` Nigel Cunningham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050921183138.52bcdf27.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=Linux-Kernel@vger.kernel.org \
--cc=ncunningham@cyclades.com \
--cc=nickpiggin@yahoo.com.au \
--cc=shaohua.li@intel.com \
--cc=spyro@f2s.com \
--cc=vatsa@in.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox